Computers and Concrete

  • 제26권5호
  • /
  • Pages.385-395
  • /
  • 2020
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Reliability based partial safety factor of concrete containing nano silica and silica fume

  • 투고 : 2020.05.11
  • 심사 : 2020.10.24
  • 발행 : 2020.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

The influence of combination of nano silica and silica fume, as partial cement replacement materials, on the properties of concrete has been studied through the measurement of compressive strength. The compressive strength of concrete in terms of mean, standard deviation and with-in-test coefficient of variation related to the variation in the nominated parameters have also been developed. The compressive strength data developed experimentally has been analyzed using normal-probability distribution and partial safety factors of composite concretes have been evaluated by using first order second moment approach with Hasofer Lind's method. The use of Nano silica and silica fume in concrete decreases the partial safety factor of concrete i.e., increase the reliability of concrete. The experimental results show that the properties of concrete having nano silica and silica fume in combination were better than that of a plain concrete. The SEM test results showing the level of Ca(OH)2 in plain concrete and consumption level Ca(OH)2 of concrete containing nano silica & silica fume have also been presented.

키워드

참고문헌

  1. ACI Standard 214 (1977), Recommended Practice for Evaluation of Strength test Results of Concrete, American Concrete Institute, Detroit, Mich.
  2. ASTM C1723-10 (2010), Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy, West Conshohocken, USA.
  3. BIS: 10262 (1982), Recommended Guidelines for Concrete Mix Design, Bureau of Indian Standards, New Delhi, India.
  4. BIS: 383 (1970), Indian Standard Specification for Coarse and Fine Aggregates from Matural Sources for Concrete, Bureau of Indian Standards, New Delhi, India.
  5. BIS: 456 (2000), Indian Standard Code of Practice for Plain and Reinforced Concrete, Bureau of Indian Standards, New Delhi, India.
  6. BIS: 516 (1999), Indian Standard Methods of Test for Strength of Concrete, Bureau of Indian Standards, New Delhi, India.
  7. BIS: 8112 (1989), Indian Standard 43 Grade Ordinary Portland Cement-Specification, Bureau of Indian Standards, New Delhi, India.
  8. Chang, K.H., Yu, X. and Choi, K.K. (1995), "Design sensitivity analysis and optimization (DSO) Structural reliability analysis", First World Congress of Structural and Multidisciplinary Optimization Held at Pergamon, Oxford, UK.
  9. Chetchotisak, P. and Teerawong, J. (2019), "Reliability-based assessment of RC pile cap design methods and proposals for their strength resistance factors", KSCE J. Civil Eng., 23, 3372-3382. https://doi.org/10.1007/s12205-019-0079-1.
  10. Ji, T. (2005), "Preliminary study on the water permeability and microstructure of concrete incorporating nano-$SiO_2$", Cement Res., 35, 1943-1947. https://doi.org/10.1016/j.cemconres.2005.07.004.
  11. Jo, B.W., Kim, C.H., Tae, G.H. and Park, J.B. (2007), "Characteristics of cement mortar with nano-$SiO_2$ particles", Constr. Build. Mater., 21, 1351-1355. https://doi.org/10.1016/j.conbuildmat.2005.12.020.
  12. Khanzadi, M., Tadayen, M., Sepehri, H. and Sepehri, M. (2010), "Influence of nano silica particles on mechanical properties and permeability of concrete", Second Intl. Conf. on Sustainable Construction Materials and Technologies, Universita Politecnica delle Marche, Ancona, Italy, June.
  13. Kim, S.W. and Suh, K.D. (2011), "Evaluation of target reliability indices and partial safety factors for slidimg of caisson breakwaters", J. Coast. Res., 64, 622-626.
  14. Kotes, P. and Vican, J. (2012), "Partial safety factors for evaluation of existing bridges according to Eurocodes", 18th International Conference Engineering Mechanics, Svratka, Czech Republic.
  15. Kumar, M. (2002), "Reliability based design of structural elements", Ph.D. Thesis, Civil Engineering Department, Thapar Institute of Engineering and Technology, Patiala, Punjab, India.
  16. Liu, B. and Xie, L. (2020), "An improved structural reliability analysis method based on local approximation and parallelization", Math., 8(2), 209. https://doi.org/10.3390/math8020209.
  17. Ni, P., Li, J., Hao, H., Yan, W., Du, X. and Zhou, H. (2020), "Reliability analysis and design optimization of nonlinear structures", Reliab. Eng. Syst. Saf., 198, 106860. https://doi.org/10.1016/j.ress.2020.106860.
  18. Nili, M., Ehsani, A. and Shabani, K. (2010), "Influence of nano-$SiO_2$ and microsilica on concrete performance", 2nd International Conference on Sustainable Construction Materials & Technology, Ancona, Italy.
  19. Onundi, O.L., Saul, K.T., Mohammed, A. and Chukwunenye, O.F. (2019), "Reliability assessment of progressive failure of a low rise framed building on weak soil-foundation interaction", J. Civil Eng. Constr. Technol., 10(3), 41-59. https://doi.org/10.1016/j.ress.2020.106860.
  20. Qing, Y., Zenan, Z., Deyu, K. and Rongshen, C. (2007), "Influence of nano-$SiO_2$ addition on properties of hardened cement paste as compared with silica fame", Constr. Build. Mater., 21, 539-545. https://doi.org/10.1016/j.conbuildmat.2005.09.001.
  21. Quadri, A. (2019), "Reliability appraisal of nominal eccentricity of short reinforced concrete column designed to BS 8110 and Eurocode (EN: 2)-Ultimate kimit state on fatigue", J. Reliab. Eng. Resil., 1(2), 1-10. https://doi.org/10.22115/RER.2019.197264.1013.
  22. Quercia, G. and Brouwers, H.J.H. (2010), "Application of nano-silica (NS) in concrete mixtures", 8th Fib. Ph.D Symposium, Lyngby.
  23. Sadrmomtazi, A. and Barzegar, A. (2010), "Assessment of the effect of Nano-$SiO_2$ on physical and mechanical properties of self-compacting concrete containing rice husk ash", 2nd International Conference on Sustainable Construction Materials & Technology, Ancona, Italy.
  24. Sanchez, F. and Sobolev, K. (2010), "Nanotechnology in concrete-A review", Constr. Build. Mater., 24, 2060-2671. https://doi.org/10.1016/j.conbuildmat.2010.03.014
  25. Saridemir, M., Severcan, M.H., Ciflikli, M. and Acer, S. (2005), "Evaluation of the relationships between the strength properties of hsc containing sf and gp at a low water-binder ratio", Iran. J. Sci. Tech. Tran. Civil Eng., 39(2), 523-538.
  26. Zhu, B., Qiao, H., Feng, Q., and Lu, C. (2017), "Accelerated life testing of concrete based on stochastic approach and assessment", Comput. Concrete, 19(1), 111-120. https://doi.org/10.12989/cac.2017.19.1.111.
  27. Zhu, Z., Qiang, S. and Chen, W. (2013), "A new method solving the temperature field of concrete around cooling pipes", Comput. Concrete, 11(5), 441-462. https://doi.org/10.12989/cac.2013.11.5.441.