Journal of the Korea Society of Computer and Information (한국컴퓨터정보학회논문지)

Korean Society of Computer Information (한국컴퓨터정보학회)
권호 표지
DOI QR코드

DOI QR Code

MES system based on real-time process capability management

  • Han, Jin-Su (Dept. of Computer & Information Technology, Korea University)
  • Received : 2020.11.02
  • Accepted : 2020.11.25
  • Published : 2020.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we propose an MES system based on real-time process capability management and how to manage the manufacturing process using the system. The current MES system presents a KPI report that makes it easy to recognize the manufacturing site, but has not been able to derive an improvement method to improve the actual manufacturing site KPI. In other words, it is difficult to extract the cause of the increase in defective rate, decrease in yield, and increase in production lead-time, and to draw an improvement plan and apply it to the manufacturing site. The purpose of the MES system based on real-time process capability management proposed in this paper is to establish an manufacturing operation management system that overcomes the limitations of the existing MES by managing the distribution of major factors of the equipment that determines the process capability. In addition, by presenting a speed improvement method for real-time large-capacity data processing, it is intended to be applied so that the system can operate well.

본 논문에서는 실시간 공정능력관리 기반의 MES(Manufacturing Execution System) 시스템과 해당 시스템을 활용한 제조 업무 수행 절차에 대해서 제안한다. 현 MES 시스템은 제조 현장을 쉽게 인지할 수 있는 KPI(Key Performance Indicator) 리포트는 제시하지만, 실질적 제조 현장의 KPI 향상을 위한 개선 방안은 도출하지 못하고 있다. 즉, 불량률 증가, 수율 감소, 생산 리드 타임(Lead-Time) 증가의 궁극적 원인을 발췌하여 개선 방안을 도출하고, 이를 제조 현장에 적용하는 부분에는 어려움이 있다. 본 논문에서 제안하는 실시간 공정능력관리 기반의 MES 시스템은 공정능력지수를 결정하는 설비 주요 인자의 산포도를 실시간으로 관리하여, 기존 MES 시스템의 한계점을 극복한 제조 운영 관리시스템 구축이 목적이다. 그리고, 실시간 대용량 데이터 처리를 위한 속도개선 방안을 제시하여, 해당 시스템이 잘 운영될 수 있도록 적용하려고 한다.

Keywords

References

  1. Jin-wook Cha, Jang-young Kim, "Analysis of fine dust correlation between air quality and meteorological factors using SPSS", Journal of the Korea Institute of Information and Communication Engineering, Vol. 22, No. 5, pp. 723, May 2018. DOI : https://doi.org/10.6109/jkiice.2018.22.4.722
  2. Kwang-Ho Cheong, "Use of Statistical Process Control for Quality Assurance in Radiation Therapy", PROGRESS in MEDICAL PHYSICS, Vol. 26, No.2, pp. 60-62, June 2015. DOI : https://doi.org/10.14316/pmp.2015.26.2.59
  3. Phyoungjung Kim, Sungwoong Hong, Yeonggyu Oh ,Daljoong Kim, "A Design of Realtime Data Sharing Platform of Production Equipment PLC", Proceedings of the Korea Information Processing Society Conference, Vol. 21, No. 2, pp. 1178, November 2014. DOI : https://doi.org/10.3745/PKIPS.y2014m11a.1177
  4. Do-Kyung Lee, "Issues on the Calculation of the Process Capability Index", Journal of Society of Korea Industrial and Systems Engineering, Vol. 37, No. 1, pp. 128, March 2014. DOI : https://doi.org/10.11627/jkise.2014.37.1.127
  5. Seong-Hoon Lee, Dong-Woo Lee, "A Study on Intelligent Production Information in Digital Convergence", Journal of Digital Convergence, Vol. 12, No. 2, pp. 297, February 2014. DOI : https://doi.org/10.14400/JDC.2014.12.2.295
  6. Doo-Yong Lee, Jing-lun Zhang, Jung-Hwan Jang, Sung-hee Yoo and Chang-Ho Lee, "A Study on MES Construction for Automobile Plant in China", Journal of the Korea Safety Management & Science, Vol. 14, No. 4, pp. 266-267, December 2012. DOI : https://doi.org/10.12812/ksms.2012.14.4.265
  7. Seung-Woo Lee, Jai-Kyung Lee, So-Jung Nam and Jong-Kweon Park, "Application of Data Acquisition System for MES", The Transactions of the Korean Society of Mechanical Engineers A), Vol. 35, No. 9, pp. 1066-1067, September 2011 DOI : https://doi.org/10.3795/KSME-A.2011.35.9.1063
  8. GunYeon Kim, YooEui Jin, SangDo Noh, SangSu Choi, YongJu Jo, SeogOu Choi, "Implementation Strategy and Effect Analysis of MES for a Small and Medium PCB Production Company based on BPR Methodology", Korean Institute of Industrial Engineers(IE interfaces), Vol. 24, No. 3, pp. 232, September 2011. DOI : https://doi.org/10.7232/IEIF.2011.24.3.231
  9. So-Jeong Nam, Jai-Kyung Lee, Sung-Woo Lee and Jong-Kweon Park, "Acquisition of Data of Equipments on Shop Floor Using Interface Between Various Equipments", The Transactions of the Korean Society of Mechanical Engineers A, Vol. 35, No. 2, pp. 151-153, February 2011. DOI : https://doi.org/10.3795/KSME-A.2011.35.2.149
  10. Jai-Kyung Lee, Seung Woo Lee, So Jeong Nam and Jong Kweon Park, "Design of Information Acquisition System for Equipments on Shop Floor", The Transactions of the Korean Society of Mechanical Engineers A, Vol. 35, No. 1, pp. 40, January 2011. DOI : https://doi.org/10.3795/KSME-A.2011.35.1.039
  11. Yun-Ki Kim, Moon-Seol Kang and Byung-Ki Kim, "Design and Implementation of Web-based Factory Monitoring System for Complement MES", The KIPS Transactions : PartD, Vol. 9D, No. 4, pp. 668, August 2002. DOI : https://doi.org/10.3745/KIPSTD.2002.9D.4.667