Fluidic oscillation characteristics of plastic flow meter with the variation of cross-sectional shape of splitters

스플리터 단면형상변화에 따른 플라스틱 유량계의 유동진동특성

  • Lee, Sung-Hee (Department of Shape Manufacturing R&D, Korea Institute of Industrial Technology)
  • 이성희 (한국생산기술연구원 형상제조연구부문)
  • Received : 2021.06.19
  • Accepted : 2021.06.30
  • Published : 2021.06.30

Abstract

In this study, design technology of a non-mechanical flow meter using fluidic oscillation generated during the fluid flow in the chamber was investigated. To with respect to design a splitter, which is the most important factor in fluid oscillation, a transient flow simulation analysis was performed for three types of shapes and changes in inlet flow velocity. The oscillation characteristics with respect to the time in each case were compared, and it was confirmed that the SM03 model was the best among the presented models. In addition, the FFT analysis of the fluid oscillation results for the SM03 model was used to obtain a linear correlation between the flow velocity change and the maximum frequency, and a frequency of 20.957 (Hz/m/s) per unit flow velocity was obtained. Finally, injection molding simulation and molding experiment of the chamber with the designed splitter were performed.

Keywords

Acknowledgement

본 연구는 한국생산기술연구원 지역혁신기반 단기애로기술지원사업(JF210032)에 의해 수행되었으며, 연구에 도움 주신 신동아전자(주)에 감사드립니다.

References

  1. R.B. Adams, "A Coanda fluidic flowmeter", IFAC Proceedings Volumes, Vol. 8, No. 1, pp. 503-509, 1975.
  2. F. Cascetta, "Short history of the flowmetering", ISA Transactions, Vol. 34, pp. 229-243, 1995. https://doi.org/10.1016/0019-0578(95)00021-Q
  3. H. Wang, G. H. Priestman, S. B. M. Beck and R. F. Boucher, "Development of fluidic flowmeters for monitoring crude oil production", Flow Meas. lnstrum., Vol. 7, No. 2, pp. 91-98, 1996. https://doi.org/10.1016/S0955-5986(97)00009-5
  4. H. Wang, S. B. M. Beck, G. H. Priestman, R. F. Boucher, "Fluidic Pressure Pulse Transmitting Flowmeter", Trans. IChemE, Vol. 75, Part A, pp. 381-391. 1997. https://doi.org/10.1205/026387697523840
  5. J.T. Yang, C.K. Chen, K.J. Tsai, W.Z. Lin, and H.J. Sheen, "A novel fluidic oscillator incorporating step-shaped attachment walls", Sensors and Actuators A, Vol. 135, pp. 476-483, 2007. https://doi.org/10.1016/j.sna.2006.09.016
  6. Y. Li, S. Someya, T. Koso, S. Aramaki, and K. Okamoto, "Characterization of periodic flow structure in a small-scale feedback fluidic oscillator under low-Reynolds-number water flow", Flow Measurement and Instrumentation, Vol. 33, pp. 179-187, 2013. https://doi.org/10.1016/j.flowmeasinst.2013.07.012
  7. T. Xie, C. Xu, "Numerical and experimental investigations of chaotic mixing behavior in an oscillating feedback micromixer", Chemical Engineering Science, Vol. 171, pp. 303-317, 2017. https://doi.org/10.1016/j.ces.2017.05.040
  8. T. Xie, Y. Ma, and C. Xu, "Passive continuous-flow microextraction/stripping system with high throughput", Chemical Engineering Science, Vol. 223 pp. 1-13, 2020.
  9. S. Mohammadshahi, S.K. Hadi, Z. Deng, K.C. Kim, "Experimental investigation of flow dynamics of oscillating jet emitted in confined and non-confined backward-facing step geometries", European Journal of Mechanics B Fluids, Vol. 88 pp. 89-102, 2021. https://doi.org/10.1016/j.euromechflu.2021.03.002
  10. Z. Li, K. Zhou, Y. Liu, and X. Wen, "Jet sweeping angle control by fluidic oscillators with master-slave designs", Chinese Journal of Aeronautics, Vol. 34, No. 5, pp. 145-162, 2021.
  11. T.J. Pedley, X.Y. Luo, "Modelling Flow and Oscillations in Collapsible Tubes", Theoret. Comput. Fluid Dynamics, Vol. 10, pp. 277-294, 1998. https://doi.org/10.1007/s001620050064
  12. A. Amouei, M. Farhadi, "Numerical investigation of a fluidic oscillator with resonance channel and vortex amplifier", Chemical Engineering Research and Design, Vol. 164, pp. 424-436, 2020. https://doi.org/10.1016/j.cherd.2020.10.008
  13. W. Sarwar, J.M. Bergada, and F. Mellibovsky, "Onset of temporal dynamics within a low reynolds-number laminar fluidic oscillator", Applied Mathematical Modelling, Vol. 95, pp. 219-235, 2021. https://doi.org/10.1016/j.apm.2021.01.044