Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Investigation of the Influence of Radius and Corner Position on the Residual Stress Distribution in the Vicinity of the Repaired Region via Directed Energy Deposition by using Finite Element Analysis

유한 요소 해석을 이용한 DED 공정의 코너 반경 및 위치에 따른 보수 영역 부근 잔류응력 분포 영향성 조사

  • Received : 2021.06.02
  • Accepted : 2021.06.17
  • Published : 2021.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

Current industrial flow is directed toward reducing the usage of raw materials by reusing parts, which is referred to as a circular economy (CE). Repair is one of the most value-added approaches in CE, which can be efficiently accomplished via additive manufacturing. The repair technology of metallic parts via the directed energy deposition process, which includes the selective removal and redeposition of damaged regions of metallic parts. Residual stress characteristics depend on the shape of the part and the shape of the redeposition region. The objective of this study is to investigate the effects of the radius and corner position of the substrate on the residual stresses for repair by using finite element analysis (FEA). The residual stress distribution of the 45° angle groove at the edge of the circular shape models on the outer and inner radii was analytically investigated. The analysis was accomplished using SYSWELD software by applying a moving heat source with defined material properties and cooling conditions integrated into the FEA model. The results showed a similar pattern of concentrated stress distribution for all models except the 40-mm and 60-mm radii, for which the maximum stress locations were different. The maximum residual stresses are high but lower than the yield strength, suggesting the absence of cracks and fractures due to residual stresses.

Keywords

Acknowledgement

This study was supported by the "Advanced remanufacturing of industrial machinery based on domestic CNC and building infrastructure for remanufacturing industry" of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) granted financial resources from the Ministry of Trade, Industry & Energy, Republic of Korea (No. 20206310200010).

References

  1. Reike, D., Vermeulen, W. J., Witjes, S., "The Circular Economy: New or Refurbished as CE 3.0?-Exploring Controversies in the Conceptualization of the Circular Economy through a Focus on History and Resource Value Retention Options," Resources, Conservation and Recycling, Vol. 135, pp. 246-264, 2018 https://doi.org/10.1016/j.resconrec.2017.08.027
  2. Rahito; Wahab, D. A.; Azman, A. H., "Additive Manufacturing for Repair and Restoration in Remanufacturing: An Overview from Object Design and Systems Perspectives," Processes, Vol. 7, No. 11, pp. 802, 2019. https://doi.org/10.3390/pr7110802
  3. Wilson, J. M., Piya, C., Shin, Y., Zhao, F., Ramani, K., "Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis," Journal of Cleaner Production, Vol. 80, pp. 170-178, 2014. https://doi.org/10.1016/j.jclepro.2014.05.084
  4. Song, L., Zeng, G., Xiao, H., Xiao, X., Li, S., "Repair of 304 stainless steel by laser cladding with 316L stainless steel powders followed by laser surface alloying with WC powders," Journal of Manufacturing Processes, Vol. 24, pp. 116-124, 2016. https://doi.org/10.1016/j.jmapro.2016.08.004
  5. Song, J., Deng, Q., Chen, C., Hu, D., Li, Y., "Rebuilding of metal components with laser cladding forming," Applied Surface Science, Vol. 252, pp. 7934-7940, 2006. https://doi.org/10.1016/j.apsusc.2005.10.025
  6. Pinkerton, A., Wang, W., Li, L., "Component repair using laser direct metal deposition," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 222, pp. 827-836, 2008.
  7. Ren, K., Chew, Y., Fuh, J. Y. H., Zhang, Y. F., Bi, G. J., "Thermo-mechanical analyses for optimized path planning in laser aided additive manufacturing processes," Materials & Design, Vol. 162, pp. 80-93, 2019. https://doi.org/10.1016/j.matdes.2018.11.014
  8. Zhang, X., Li, W., Adkison, K.M., Frank, L., "Damage reconstruction from tri-dexel data for laser-aided repairing of metallic components," The International Journal of Advanced Manufacturing Technology, Vol. 96, pp. 3377-3390, 2018. https://doi.org/10.1007/s00170-018-1830-3
  9. Lu, X., Chiumenti, M., Cervera, M., Li, J., Lin, X., Ma, L., Zhang, G., Liang, E., "Substrate design to minimize residual stresses in Directed Energy Deposition AM processes," Materials & Design, Vol. 202, article 109525, 2021.
  10. Chua, B. L., Ahn, D. G., "Estimation Method of Interpass Time for the Control of Temperature during a Directed Energy Deposition Process of a Ti-6Al-4V Planar Layer," Materials, Vol 13, No. 21, Article 4935, 2020. https://doi.org/10.3390/ma13214704
  11. Hung, T. P., Shi, H. E., Kuang, J. H., "Temperature Modeling of AISI 1045 Steel during Surface Hardening Processes. Materials," Vol. 11, No. 10, pp. 1815, 2018. https://doi.org/10.3390/ma11101815
  12. Sysweld, Visual-Environment Version 15.5, ESI Group Inc. 2021.
  13. Kim, H., Lee, K. K., Ahn, D. G., Lee, H., "Effects of Deposition Strategy and Preheating Temperature on Thermo-Mechanical Characteristics of Inconel 718 Super-Alloy Deposited on AISI 1045 Substrate Using a DED Process," Materials, Vol. 14, No. 7, Article 1794, 2021.
  14. JmatPro, JmatPro version 12.0, Sente Software Ltd. 2021.
  15. Jenney, C. L., O'Brien, A., Welding Handbook, Vol 1: Welding Science and Technology (9th ed.), Woodhead Publishing Ltd., pp 297-357, 2001.