DOI QR코드

DOI QR Code

Improving mechanical and durability properties of hypo sludge concrete with basalt fibres and SBR latex

  • 투고 : 2020.09.02
  • 심사 : 2021.09.29
  • 발행 : 2021.10.25

초록

Utilization, reduction and disposal of the pulp and paper industry waste (Hypo Sludge) are crucial from an environmental perspective. Hypo sludge, when disposed of as landfill, contributes to the groundwater contamination caused by the leachates. Hence, the utilization of hypo sludge from the paper industry in the construction applications promotes the development of sustainable concrete; reduces landfills, and creates an environment free from harmful wastes. In the present context, this research focused on the partial replacement of cement by hypo sludge. It was observed that even though the addition of 10% of hypo sludge was sufficient to produce sustainable concrete, there was a negative influence on the durability as more water absorption was observed due to the presence of high cellulose fibre content. Hence styrene-butadiene rubber (SBR) latex and basalt fibres were added to improve its durability and post cracking behaviour respectively. A significant improvement in the strength and durability was observed when 10% of hypo sludge as a cement replacement is used in combination with 0.25% of basalt fibres and 10% of SBR latex when compared with the conventional concrete. The micro structural studies revealed that SBR latex produced better consistency in the interaction among the phases of concrete.

키워드

과제정보

The author(s) declared no potential conflicts of interest with respect to the research, authorship. and/or publication of this article.

참고문헌

  1. ASTM C 1202 (2012), Specifications for Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, Annual book of ASTM Standards.
  2. ASTM C 1585 (2013), Specifications for Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes, Annual book of ASTM standards.
  3. ASTM C 642 (2013), Specifications for Standard Test Method for Density, Absorption and Voids in Hardened Concrete, Annual book of ASTM Standards.
  4. Barluenga, G. and Hernandez-Olivares, F. (2004), "SBR latex modified mortar rheology and mechanical behaviour", Cement Concrete Res., 34(3), 527-535. https://doi.org/10.1016/j.cemconres.2003.09.006.
  5. Bhatty, J.I., Dollimore, D., Gamlen, G.A., Mangabhai, R.J. and Olmez, H. (1986), "Estimation of calcium hydroxide in OPC, OPC/PFA and OPC/PFA/polymer modified systems", Thermochimica Acta, 106, 115-123. https://doi.org/10.1016/0040-6031(86)85122-X.
  6. Branston, J., Das, S., Kenno, S.Y. and Taylor, C. (2016), "Mechanical behaviour of basalt fibre reinforced concrete", Constr. Build. Mater., 124, 878-886. https://doi.org/10.1016/j.conbuildmat.2016.08.009.
  7. Chithambaram, S.J., Kumar, S., Prasad, M.M. and Adak, D. (2018), "Effect of parameters on the compressive strength of fly ash based geopolymer concrete", Struct. Concrete, 19(4), 1202-1209. https://doi.org/10.1002/suco.201700235.
  8. Fava, G., Ruello, M.L. and Corinaldesi, V. (2011), "Paper mill sludge ash as supplementary cementitious material", J. Mater. Civil Eng., 23(6), 772-776. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000218.
  9. Fenu, L., Forni, D. and Cadoni, E. (2016), "Dynamic behaviour of cement mortars reinforced with glass and basalt fibres", Compos. Part B Eng., 92, 142-150. https://doi.org/10.1016/j.compositesb.2016.02.035.
  10. Gharieb, M. and Rashad, A.M. (2020), "An initial study of using sugar-beet waste as a cementitious material", Constr. Build. Mater., 250, 118843. https://doi.org/10.1016/j.conbuildmat.2020.118843.
  11. Goel, G. and Kalamdhad, A.S. (2017), "An investigation on use of paper mill sludge in brick manufacturing", Constr. Build. Mater., 148, 334-343. https://doi.org/10.1016/j.conbuildmat.2017.05.087.
  12. Huang, B., Wu, H., Shu, X. and Burdette, E.G. (2010), "Laboratory evaluation of permeability and strength of polymer-modified pervious concrete", Constr. Build. Mater., 24(5), 818-823. https://doi.org/10.1016/j.conbuildmat.2009.10.025.
  13. IS 516 (2013), Method of Tests for Strength of Concrete, New Delhi, India.
  14. IS 9103 (2008), Specification for Concrete Admixtures, Bureau of Indian Standards, New Dehli, India.
  15. IS 10262 (2009), Concrete mix proportioning-guidelines, Bureau of Indian Standards, New Delhi, India.
  16. IS 383 (2016), Specification for Coarse and Fine Aggregates from Natural Sources for Concrete.
  17. IS 5816 (1999), Indian Standard Splitting tensile strength of concrete-method of test, Bureau of Indian Standards, New Delhi.
  18. IS12269 (2013), Indian standard ordinary Portland cement, 53 grade specification, Bureau of Indian Standards, New Delhi, India.
  19. Jiang, C., Fan, K., Wu, F. and Chen, D. (2014), "Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete", Mater. Des., 58, 187-193. https://doi.org/10.1016/j.matdes.2014.01.056.
  20. Joshi, G. and Pitroda, J.R. (2018), "Evaluation of sorptivity and water captivation of concrete with partial replacement of cement by hypo sludge", IOP Conf. Ser. Mater. Sci. Eng., 431(3), 032010. https://doi.org/10.1088/1757-899X/431/3/032010.
  21. Kim, W., Oh, R.O., Lee, J.H., Kim, M.S., Jeon, S.M. and Park, C.G. (2019), "Mechanical and durability characteristics of latex-modified fiber-reinforced segment concrete as a function of microsilica content", Adv. Civil Eng., 2019, Article ID 3658125. https://doi.org/10.1155/2019/3658125.
  22. Kinuthia, J. (2018), "Wastepaper sludge ash", Waste Suppl. Cement Mater. Concrete Charact., Prop. Appl., 289-321. https://doi.org/10.1016/B978-0-08-102156-9.00010-9.
  23. Kizilkanat, A.B., Kabay, N., Akyuncu, V., Chowdhury, S. and Akca, A.H. (2015), "Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete: An experimental study", Constr. Build. Mater., 100, 218-224. https://doi.org/10.1016/j.conbuildmat.2015.10.006.
  24. Letelier, V., Tarela, E., Osses, R., Cardenas, J.P. and Moriconi, G. (2017), "Mechanical properties of concrete with recycled aggregates and waste glass", Struct. Concrete, 18(1), 40-53. https://doi.org/10.1002/suco.201500143.
  25. Lu, Z., Kong, X., Zhang, C., Xing, F., Cai, Y., Jiang, L., Zhang, Y. and Dong, B. (2017), "Effect of surface modification of colloidal particles in polymer latexes on cement hydration", Constr. Build. Mater., 155, 1147-1157. https://doi.org/10.1016/j.conbuildmat.2017.08.114.
  26. Mahapatra, C.K. and Barai, S.V. (2019), "Sustainable self compacting hybrid fiber reinforced concrete using waste materials", Struct. Concrete, 20(2), 756-765. https://doi.org/10.1002/suco.201700239.
  27. Mohammadyan-Yasouj, S.E. and Ghaderi, A. (2020), "Experimental investigation of waste glass powder, basalt fibre, and carbon nanotube on the mechanical properties of concrete", Constr. Build. Mater., 252, 119115. https://doi.org/10.1016/j.conbuildmat.2020.119115.
  28. Mohammed, B.S. and Fang, O.C. (2011), "Mechanical and durability properties of concretes containing paper-mill residuals and fly ash", Constr. Build. Mater., 25(2), 717-725. https://doi.org/10.1016/j.conbuildmat.2010.07.015.
  29. Molaei Raisi, E., Vaseghi Amiri, J. and Davoodi, M.R. (2018), "Mechanical performance of self-compacting concrete incorporating rice husk ash", Constr. Build. Mater., 177, 148-157. https://doi.org/10.1016/j.conbuildmat.2018.05.053.
  30. Mollah, M.Y.A., Yu, W., Schennach, R and Cocke, D.L. (2000), "Fourier transform infrared spectroscopic investigation of the early hydration of Portland cement and the influence of sodium lignosulfonate", Cement Concrete Res., 30(2), 267-273. https://doi.org/10.1016/S0008-8846(99)00243-4.
  31. Monteiro, S.N., Alexandre, J., Margem, J.I., Sanchez, R. and Vieira, C.M.F. (2008), "Incorporation of sludge waste from water treatment plant into red ceramic", Constr. Build. Mater., 22(6), 1281-1287. https://doi.org/10.1016/j.conbuildmat.2007.01.013.
  32. Ofuyatan, O.M., Adeniyi, A.G., Ijie, D., Ighalo, J.O. and Oluwafemi, J. (2020), "Development of high-performance self compacting concrete using eggshell powder and blast furnace slag as partial cement replacement", Constr. Build. Mater., 256, 119403. https://doi.org/10.1016/j.conbuildmat.2020.119403.
  33. Patel, J., Patil, H., Patil, Y. and Vesmawala, G. (2019), "Strength and transport properties of concrete with styrene butadiene rubber latex modified lightweight aggregate", Constr. Build. Mater., 195, 459-467. https://doi.org/10.1016/j.conbuildmat.2018.11.092.
  34. Pokhrel, D. and Viraraghavan, T. (2004), "Treatment of pulp and paper mill wastewater-A review", Sci. Total. Environ., 333(1-3), 37-58. https://doi.org/10.1016/j.scitotenv.2004.05.017.
  35. Ranjbar, N., Behnia, A., Alsubari, B., Birgani, P.M. and Jumaat, M.Z. (2016), "Durability and mechanical properties of self-compacting concrete incorporating palm oil fuel ash", J. Clean. Prod., 112, 723-730. https://doi.org/10.1016/j.jclepro.2015.07.033.
  36. Rossignolo, J.A. (2009), "Interfacial interactions in concretes with silica fume and SBR latex", Constr. Build. Mater., 23(2), 817-821. https://doi.org/10.1016/j.conbuildmat.2008.03.005.
  37. Sabir, B.B., Wild, S. and O'Farrell, M. (1998), "A water sorptivity test for mortar and concrete", Mater. Struct. Constr., 31(8), 568-574. https://doi.org/10.1007/bf02481540.
  38. Sakai, E. and Sugita, J. (1995), "Composite mechanism of polymer modified cement", Cement Concrete Res., 25(1), 127-135. https://doi.org/10.1016/0008-8846(94)00120-N.
  39. Segui, P., Aubert, J.E., Husson, B. and Measson, M. (2012), "Characterization of wastepaper sludge ash for its valorization as a component of hydraulic binders", Appl. Clay Sci., 57, 79-85. https://doi.org/10.1016/j.clay.2012.01.007.
  40. Shadmani, A., Tahmouresi, B., Saradar, A. and Mohseni, E. (2018), "Durability and microstructure properties of SBR-modified concrete containing recycled asphalt pavement", Constr. Build. Mater., 185, 380-390. https://doi.org/10.1016/j.conbuildmat.2018.07.080.
  41. Shaker, F.A., El-Dieb. A.S. and Reda M.M. (1997), "Durability of styrene-butadiene latex modified concrete", Cement Concrete Res., 27(5), 711-720. https://doi.org/10.1016/S0008-8846(97)00055-0.
  42. Siddiqi, Z.A., Hameed, R., Saleem, M. and Khan, Q.S. (2013), "Determination of compressive strength and water absorption of styrene butadiene rubber (SBR) latex modified concrete", Pakistan J. Sci., 6(1), 124-128.
  43. Solanki, J. and Pitroda, J. (2013), "Flexural strength of beams by partial replacement of cement with fly ash and hypo sludge in concrete", Ind. J. Appl. Res., 2(1), 173-179.
  44. Song, P.S., Hwang, S. and Sheu, B.C. (2005), "Strength properties of nylon- and polypropylene fiberreinforced concretes", Cement Concrete Res., 35(8), 1546-1550. https://doi.org/10.1016/j.cemconres.2004.06.033.
  45. Srividhya, S., Vidjeapriya, R. and Neelamegam, M. (2021), "Enhancing the performance of hypo sludge concrete beams using basalt fibres and latex under cyclic loading", Comput. Concrete, 28(1), 93-105. https://doi.org/10.12989/cac.2021.28.1.093.
  46. Sumathi, S. and Hung, Y.T. (2005), "Treatment of pulp and paper mill wastes", Waste Treat. Proc. Ind., 453-497.
  47. Tripathi, J.G. (2011), "Study of India's paper industry-potential and growth in 21st century", Ind. J. Appl. Res., 4(5), 112-115. https://doi.org/10.15373/2249555x/may2014/36.
  48. Vigil de la Villa, R., Frias, M., Sanchez de Rojas, M.I., Vegas, I. and Garcia, R. (2007), "Mineralogical and morphological changes of calcined paper sludge at different temperatures and retention in furnace", Appl. Clay Sci., 36(4), 279-286. https://doi.org/10.1016/j.clay.2006.10.001.
  49. Wang, M., Wang, R., Yao, H., Farhan, S., Zheng, S., Wang, Z., Du, C. and Jiang, H. (2016), "Research on the mechanism of polymer latex modified cement", Constr. Build. Mater., 111, 710-718. https://doi.org/10.1016/j.conbuildmat.2016.02.117.
  50. Wong, H.S., Barakat, R., Alhilali, A., Saleh, M. and Cheeseman, C.R. (2015), "Hydrophobic concrete using waste paper sludge ash", Cement Concrete Res., 70, 9-20. https://doi.org/10.1016/j.cemconres.2015.01.005.
  51. Yerramala, A. (2014), "Properties of concrete with eggshell powder as cement replacement", Ind. Concrete J., 88(10), 94-102.
  52. Zabihi, S.M., Tavakoli, H. and Mohseni, E. (2018), "Engineering and microstructural properties of fiber-reinforced rice husk-ash based geopolymer concrete", J. Mater. Civil Eng., 30(8), 1-10. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002379.