DOI QR코드

DOI QR Code

Evaluation of Initial Operation Stability of Hydrogen-Fueled, Low-Temperature Solid Oxide Fuel Cell with Sputtered Ni Thin-Film Anode

스퍼터링 니켈박막 연료극 적용 수소공급 저온 세라믹 연료전지의 초기작동 안정성 평가

  • SANGHOON, JI (Department of Environmental Research, Korea Institute of Civil Engineering and Building Technology) ;
  • WEONJAE, KIM (Department of Environmental Research, Korea Institute of Civil Engineering and Building Technology) ;
  • SANGJONG, HAN (Department of Environmental Research, Korea Institute of Civil Engineering and Building Technology) ;
  • HYANGYOUN, CHANG (Department of Environmental Research, Korea Institute of Civil Engineering and Building Technology) ;
  • NARI, PARK (Department of Environmental Research, Korea Institute of Civil Engineering and Building Technology) ;
  • MISEON, KIM (Civil and Environmental Engineering, University of Science and Technology) ;
  • SUNGWON, KANG (Department of Environmental Research, Korea Institute of Civil Engineering and Building Technology) ;
  • HYUNMAN, LIM (Department of Environmental Research, Korea Institute of Civil Engineering and Building Technology) ;
  • JINHONG, JUNG (Department of Environmental Research, Korea Institute of Civil Engineering and Building Technology) ;
  • KWANGHO, AHN (Department of Environmental Research, Korea Institute of Civil Engineering and Building Technology) ;
  • MIRATUL, MAGHFIROH (Civil and Environmental Engineering, University of Science and Technology) ;
  • SUK WON, CHA (Department of Mechanical Engineering, Seoul National University)
  • 지상훈 (한국건설기술연구원 환경연구본부) ;
  • 김원재 (한국건설기술연구원 환경연구본부) ;
  • 한상종 (한국건설기술연구원 환경연구본부) ;
  • 장향연 (한국건설기술연구원 환경연구본부) ;
  • 박나리 (한국건설기술연구원 환경연구본부) ;
  • 김미선 (과학기술연합대학원대학교 건설환경공학 전공) ;
  • 강성원 (한국건설기술연구원 환경연구본부) ;
  • 임현만 (한국건설기술연구원 환경연구본부) ;
  • 정진홍 (한국건설기술연구원 환경연구본부) ;
  • 안광호 (한국건설기술연구원 환경연구본부) ;
  • 미라툴 매크피로 (과학기술연합대학원대학교 건설환경공학 전공) ;
  • 차석원 (서울대학교 기계공학부)
  • Received : 2022.11.11
  • Accepted : 2022.12.12
  • Published : 2022.12.30

Abstract

The initial operation stability of hydrogen-fueled, solid oxide fuel cell with Ni thin-film anode fabricated by direct current sputtering was evaluated in terms of electrochemical properties such as peak power density, open circuit voltage, overpotential, and alternating current impedance at 500℃. Hydrogen and air were used as anode fuel and cathode fuel, respectively.

Keywords

Acknowledgement

본 연구는 한국건설기술연구원 내부사업(No. 20220232, 20220081)과 한국연구재단 이공분야기초연구사업(No. NRF-2018R1D1A1B07048082)의 지원에 의해 수행되었다.

References

  1. Y. H. Lee, I. Chang, G. Y. Cho, J. Park, W. Yu, W. H. Tanveer, and S. W. Cha, "Thin film solid oxide fuel cells operating below 600℃: a review", International Journal of Precision Engineering and Manufacturing Green Technology, Vol. 5, No. 3, 2018, pp. 441-453, doi: https://doi.org/10.1007/s4068401800470.
  2. S. Ji, H. G. Seo, S. Lee, J. Seo, Y. Lee, W. H. Tanveer, S. W. Cha, and W. C. Jung, "Integrated design of a Ni thin-film electrode on a porous alumina template for affordable and high-performance low-temperature solid oxide fuel cells", RSC Advances, Vol. 7, No. 38, 2017, pp. 2360023606, doi: https://doi.org/10.1039/c7ra02719b.
  3. Y. Lee, J. Park,W. Yu, W. H. Tanveer, Y. H. Lee, G. Y. Cho, T. Park, C. Zheng, W. Lee, and S. W. Cha, "Nickel-based bilayer thin-film anodes for low-temperature solid oxide fuel cells", Energy, Vol. 161, 2018, pp. 1133-1138, doi: https://doi.org/10.1016/j.energy.2018.07.147.
  4. M. S. Lee, S. Lee, W. Jeong, S. Ryu, W. Yu, Y. H. Lee, G. Y. Cho, and S. W. Cha, "Nanoporous nickel thin film anode optimization for low-temperature solid oxide fuel cells", International Journal of Hydrogen Energy, Vol. 46, No. 73, 2021, pp. 36445-36453, doi: https://doi.org/10.1016/j.ijhydene.2021.08.138.
  5. F. Tietz, "Thermal expansion of SOFC materials", Ionics, Vol. 5, 1999, pp. 129-139, doi: https://doi.org/10.1007/BF02375916.
  6. Q. Yan, H. Toghiani, and H. Causey, "Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes", Journal of Power Sources, Vol. 161, No. 1, 2006, pp. 492-502, doi: https://doi.org/10.1016/j.jpowsour.2006.03.077.
  7. S. Ji, Y. H. Lee, T. Park, G. Y. Cho, S. Noh, Y. Lee, M. Kim, S. Ha, J. An, and S. W. Cha, "Doped ceria anode interlayer for Low-temperature solid oxide fuel cells with nanothin electrolyte", Thin Solid Films, Vol. 591, Part B, 2015, pp. 250-254, doi: https://doi.org/10.1016/j.tsf.2015.05.005.
  8. C. W. Kwon, J. I. Lee, K. B. Kim, H. W. Lee, J. H. Lee, and J. W. Son, "The thermomechanical stability of micro-solid oxide fuel cells fabricated on anodized aluminum oxide membranes", Journal of Power Sources, Vol. 210, 2012, pp. 178-183, doi: https://doi.org/10.1016/j.jpowsour.2012.03.020.