DOI QR코드

DOI QR Code

Analysis of load data for developing a self-propelled underground crop harvester during potato harvesting

  • Min Jong Park (Department of Biosystems Machinery Engineering, Chungnam National University) ;
  • Seung Min Baek (Department of Smart Agriculture Systems, Chungnam National University) ;
  • Seung Yun Baek (Department of Smart Agriculture Systems, Chungnam National University) ;
  • Hyeon Ho Jeon (Department of Smart Agriculture Systems, Chungnam National University) ;
  • Wan Soo, Kim (Department of Bio Industrial Machinery Engineering, Kyungpook National University) ;
  • Ryu Gap, Lim (Innovalley Substantiation Team, KOAT) ;
  • Yong Joo Kim (Department of Biosystems Machinery Engineering, Chungnam National University)
  • Received : 2022.10.12
  • Accepted : 2022.11.14
  • Published : 2022.12.01

Abstract

The purpose of this study is to develop a self-propelled underground crop harvester and its performance was evaluated by measuring the load during actual potato harvesting operations. This study was conducted at a constant working speed of 1 km·h-1. A load measurement system was installed to measure the actual load and the required working power was analyzed. A hydraulic pressure sensor was also installed to measure the hydraulic pressure. The required hydraulic power was calculated using the hydraulic pressure and flow rate. The results showed that the engine speed, torque, and power during harvesting operation were in the range of 845 - 1,423 rpm, 95 - 228 Nm, and 9 - 31 kW, respectively. Traction power, excluding the hydraulic pump of the tractor and power take-off (PTO) output, was in the range of 9 - 28 kW, and it was confirmed that it occupies a ratio of 16.2 to 50% of the engine rated output. The engine can supply the minimum required traction power to move the vehicle. This means that the engine used in this study could be down-sized to be suitable for an underground crop harvester. In this study, the gear stages of the tractor were not considered. This research thus shows the possibility of developing a self-propelled underground crop harvester.

Keywords

Acknowledgement

본 논문은 농림축산식품부의 재원으로 농림식품기술기획평가원의 기술사업화지원사업(122033-2)과 첨단농기계산업화기술개발사업(321062-02)의 지원을 받아 연구되었음.

References

  1. Baek SM, Kim WS, Baek SY, Jeon HH, Lee JH, Song YI, Choi Y, Kim YK, Lee SH, Kim YJ. 2021. Analysis of the power requirements of a 55 kW class agricultural tractor during a garlic harvesting operation. Korean Journal of Agricultural Science 48:1039-1050. [in Korean]
  2. Jang JH, Kim WS, Choi CH, Park SU, Kim YJ. 2018. Analysis of power requirement of the underground crop harvester attached on agricultural tractor during traction operation. The Journal of Korea Institute of Information, Electronics, and Communication Technology 11:150-155. [in Korean] https://doi.org/10.17661/JKIIECT.2018.11.2.150
  3. Kim WS, Lee WS, Kim YJ. 2020. A review of the applications of the Internet of things (IoT) for agricultural automation. Journal of Biosystems Engineering 45:385-400. https://doi.org/10.1007/s42853-020-00078-3
  4. KOSIS (Korean Statistical Information Service). 2021a. Mechanization rate of rice (harvest) operation. KOSIS, Daejeon, Korea. [in Korean]
  5. KOSIS (Korean Statistical Information Service). 2021b. Mechanization rate of field crop (harvest) operation. KOSIS, Daejeon, Korea. [in Korean]
  6. Lee SH, Kang TG, Choi Y, Kang YK, Kim YH. 2020. Performance analysis of a gathering type potato harvester. Journal of Agriculture & Life Science 54:94-100. [in Korean]
  7. Lim H, Seo MK, Joo YH, Yun BU, Bang BJ. 2019. Development of an intelligent control system for a underground crop harvester. The Transactions of the Korean Institute of Electrical Engineers 68:173-179. [in Korean]
  8. Suh DS. 2021. Promotion of 'Field Crop Mechanization' emerged with COVID 19. Accessed in https://www.krei.re.kr/krei/selectBbsNttView.do?key=109&bbsNo=75&nttNo=147909&searchCtgry=&searchCnd=all&searchKrwd=&pageIndex=7&integrDeptCode= on 6 October 2022. [in Korean]