참고문헌
- ABAQUS/standard (2008), Analysis User's Manual, Dassault Systemes Simulia Corp. Providence, RI.
- Albermani, F.G.A. and Kitipornchai, S. (2003), "Numerical simulation of structural behaviour of transmission towers", Thin Wall Struct., 41(2-3), 167-177. https://doi.org/10.1016/S0263-8231(02)00085-X.
- Amoroso, S., Hebert, K. and Levitan, M. (2010), "Wind tunnel tests for mean wind loads on partially clad structures", J. Wind Eng. Ind. Aerod., 98(12), 689-700. https://doi.org/10.1016/j.jweia.2009.08.009.
- Baker, W.F., Korista, D.S. and Novak, L.C. (2007), "Burj Dubai: Engineering the world's tallest building", Struct. Des. Tall Special Build., 16(4), 361-375. https://doi.org/10.1002/tal.418.
- Beale, R.G. (2014), "Scaffold research-A review", J. Constr. Steel Res., 98, 188-200. https://doi.org/10.1016/j.jcsr.2014.01.016.
- Bernardini, E., Spence, S.M., Kwon, D.K. and Kareem, A. (2015), "Performance-based design of high-rise buildings for occupant comfort", J. Struct. Eng., 141(10), 04014244.
- Chang, F. K. (1973), "Human response to motions in tall buildings", Journal of the Structural Division, 99(6), 1259-1272. https://doi.org/10.1061/JSDEAG.0003537.
- CTPIS, (2000), The Ministry of Construction of People's Republic of China, "CTPIS Temporary Provisions for Integral-Lift Scaffold Structures", China Architecture and Building Press, Beijing (in Chinese),
- Davenport, A.G. (1964), "Note on the distribution of the largest value of a random function with application to gust loading", Proceedings of the Institution of Civil Engineers, 28(2), 187-196. https://doi.org/10.1680/iicep.1964.10112.
- Fang, F.M., Chang, S.X., Chung, C.Y., Li, Y.C., Lin, C.C. and Huang, C.H. (2021), "Investigations on the wind force and flow of a scaffolding system", J. Chinese Inst. Eng., 44(4), 305-318. https://doi.org/10.1080/02533839.2021.1903341.
- Fu, J., Zheng, Q., Huang, Y., Wu, J., Pi, Y. and Liu, Q. (2018), "Design optimization on high-rise buildings considering occupant comfort reliability and joint distribution of wind speed and direction", Eng. Struct., 156, 460-471. https://doi.org/10.1016/j.engstruct.2017.11.041.
- GB 50009, 2012. "Chinese Standard Load Code for the Design of Building Structures", China Architecture and Building Press, Beijing, China. Chinese Code.
- Huang, M.F., Chan, C.M. and Kwok, K. (2011), "Occupant comfort evaluation and wind-induced serviceability design optimization of tall buildings", Wind Struct., 14(6), 559-582. https://doi.org/10.12989/was.2011.14.6.559
- Irtaza, H., Beale, R.G. and Godley, M.H.R. (2012), "A wind-tunnel investigation into the pressure distribution around sheet-clad scaffolds", J. Wind Eng. Ind. Aerod., 103, 86-95. https://doi.org/10.1016/j.jweia.2012.03.004.
- Klinger, C. (2014), "Failures of cranes due to wind induced vibrations", Eng. Fail. Anal., 43, 198-220. https://doi.org/10.1016/j.engfailanal.2013.12.007.
- Kumaravel, R., and Krishnamoorthy, A. (2020), "Comparative structural analysis of lattice hybrid and tubular wind turbine towers", Wind Struct., 30(1), 29-35. https://doi.org/10.12989/was.2020.30.1.029.
- Lin, Y., Hu, A.K., Xiong, F., and Jiang, W. (2014), "Discussion on key points of wind load of jack-up unit", China Ocean Eng., 28(1), 127-138. https://doi.org/10.1007/s13344-014-0010-y. Lipecki, T., Jaminska-Gadomska, P. and Blazik-Borowa, E.
- "Wind load on facade scaffolding without protective cover-Eurocode and in-situ measurement approaches", J. Build. Eng., 42, 102516. https://doi.org/10.1016/j.jobe.2021.102516.
- Lipecki, T., Jaminska-Gadomska, P., Bec, J., and Blazik-Borowa, E. (2020), "Facade scaffolding behaviour under wind action", Arch. Civil Mech. Eng., 20(1), 1-15. https://doi.org/10.1007/s43452-020-00034-0.
- Lu, Y., Zhang, L., He, Z., Feng, F. and Pan, F. (2021), "Wind-induced vibration fragility of outer-attached tower crane to super-tall buildings: A case study", Wind Struct., 32(5), 405-421. https://doi.org/10.12989/was.2021.32.5.405.
- Luo, Y., Xu, W., Zhou, H. and Gong, G. (2006), "Analysis on dynamic behavior of integral steel platform formwork system for super high rise buildings", Arch. Technol., 8. (in Chinese)
- Pomaranzi, G., Bistoni, O., Schito, P. and Zasso, A. (2021), "Numerical modelling of three-dimensional screens, treated as porous media", Wind Struct., 33(5), 409-422. https://doi.org/10.12989/was.2021.33.5.409.
- Scarabino, A., Sainz, M.G., Bacchi, F., Delnero, J.S. and Canchero, A. (2016), "Numerical and experimental study of unsteady wind loads on panels of a radar aerial", Wind Struct., 23(1), 1-18. https://doi.org/10.12989/was.2016.23.1.001
- Songpol Charuvisit, Yasumichi Hino, Katsutoshi Ohdo, et al., (2007), "Wind tunnel experiment on wind pressures acting on the scaffolds in strong winds", J. Wind Eng., 32(1), 1-10. https://doi.org/10.5359/jwe.32.1.
- Voisin, D., Grillaud, G., Solliec, C., Beley-Sayettat, A., Berlaud, J. L. and Miton, A. (2004), "Wind tunnel test method to study out-of-service tower crane behaviour in storm winds", J. Wind Eng. Ind. Aerod., 92(7-8), 687-697. https://doi.org/10.1016/j.jweia.2004.03.005.
- Wang, F., Tamura, Y. and Yoshida, A. (2013), "Wind loads on clad scaffolding with different geometries and building opening ratios", J. Wind Eng. Ind. Aerod., 120, 37-50. https://doi.org/10.1016/j.jweia.2013.06.015.
- Wang, Z., Tang, H., Li, Y., Guo, J. and Liu, Z. (2021), "Windproof ability of aerodynamic measures to improve the wind environment above a truss girder", Wind Struct., 32(5), 423-437. https://doi.org/10.12989/was.2021.32.5.423.
- Xu, Y., Ren, Q., Bai, G. and Li H. (2019), "Experimental research on design wind loads of a large air-cooling structure", Wind Struct., 28(4), 215-224. https://doi.org/10.12989/was.2019.28.4.215.
- Yue, F., Li, G.Q. and Yuan, Y. (2012), "Design methods of integral-lift tubular steel scaffolds for high-rise building construction", Struct. Des. Tall Special Build., 21(1), 46-56. https://doi.org/10.1002/tal.635.
- Yue, F., Yuan, Y., Li, G.Q., Ye, K.M., Chen, Z.M. and Wang, Z.P. (2005), "Wind load on integral-lift scaffolds for tall building construction", J. Struct. Eng., 131(5), 816-824. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:5(816)
- Zayed, T., Sharifi, M.R., Baciu, S. and Amer, M. (2008), "Slip-form application to concrete structures", J. Constr. Eng. Manag., 134(3), 157-168. https://doi.org/10.1061/(ASCE)0733-9364(2008)134:3(157)