DOI QR코드

DOI QR Code

Serial pendulum DVA design using Genetic Algorithm (GA) by considering the pendulum nonlinearity

  • Lovely Son (Department of Mechanical Engineering, Andalas University) ;
  • Firman Erizal (Department of Mechanical Engineering, Andalas University) ;
  • Mulyadi Bur (Department of Mechanical Engineering, Andalas University) ;
  • Agus Sutanto (Department of Mechanical Engineering, Andalas University)
  • 투고 : 2023.10.13
  • 심사 : 2024.02.21
  • 발행 : 2024.03.25

초록

A serial pendulum dynamic vibration absorber (DVA) was designed to suppress the vibration of two degrees of freedom (Two-DOF) structure model. The optimal DVA parameters are selected using a genetic algorithm (GA) by minimizing the fitness function formulated from the system's frequency response function (FRF). Two fitness function criteria, using one and two target frequency ranges, were utilized to calculate the optimal DVA parameters. The optimized serial pendulum DVA parameters were used to reduce structural vibration under free and forced excitation conditions. The simulation study found that the serial pendulum DVA can effectively reduce the vibration response for a small excitation amplitude. However, the DVA performance decreases for a large excitation amplitude due to the nonlinearity of pendulum motion, and the percentage of vibration response attenuation is smaller than that obtained using a small excitation amplitude.

키워드

과제정보

The research described in this paper was financially supported by the Natural Science Foundation.

참고문헌

  1. Banerjee, S. and Matsagar, V. (2023), "Hybrid vibration control of hospital buildings against earthquake excitations using unbonded fiber-reinforced elastomeric isolator and tuned mass damper", Build., 13(7), 1-23. https://doi.org/10.3390/buildings13071724.
  2. Chen, J., Chen, M.Z.Q. and Hu, Y. (2021), "Vortex-induced vibration suppression of bridges by inerter-based dynamic vibration absorbers", Shock Vib., 2021, Article ID 4431516. https://doi.org/10.1155/2021/4431516.
  3. D'Imperio, S., Berruti, T.M., Gastaldi, C. and Soccio, P. (2022), "Tunable vibration absorber design for a high-precision cartesian robot", Robotic., 11(5), 1-20. https://doi.org/10.3390/robotics11050103.
  4. Dai, K., Tang, J. and Zhang, S. (2022), "An integrated equivalent tuned-mass-inerter vibration absorber and its optimal design", Struct. Control Hlth Monit., 29(11), 1-23. https://doi.org/10.1002/stc.3089.
  5. Fallahpasand, S., Dardel, M., Pashai, M.H. and Daniati, H. (2015), "Investigation and optimization of nonlinear pendulum vibration absorber for horizontal vibration suppression of damped system", Struct. Des. Tall Spec. Build., 24(14), 873-893. https://doi.org/10.1002/tal.1216.
  6. Fan, F., Gao, Z., Bian, Y., Zhang, Y. and Cong, Q. (2022), "Nonlinear vibration control of large space antenna based on semi-active vibration absorber", Proceeding of CCMMS: China International Conference on Mechanism and Machine Science & Engineering, Yantai, August.
  7. Frahm, H. (1909), "Device for damping vibrations of bodies", U.S. Patent US989958A, 30 October.
  8. Gao, T., Li, J., Zhu, S., Yang, X. and Zhao, H. (2023), "H∞ optimization of three-element-type dynamic vibration absorber with inerter and negative stiffness based on the particle swarm algorithm", Entropy, 25(7), 1-25. https://doi.org/10.3390/e25071048.
  9. Huang, Z., Hua, X., Chen, Z. and Niu, H. (2019), "Optimal design of TVMD with linear and nonlinear viscous damping for SDOF systems subjected to harmonic excitation", Struct. Control Hlth. Monit., 26(10), e2413. https://doi.org/10.1002/stc.2413.
  10. Konar, T. and Ghosh, A.D. (2023), "Adaptive design of an overhead water tank as dynamic vibration absorber for buildings by use of a stiffness varying support arrangement", J. Vib. Eng. Technol., 11, 827-843. https://doi.org/10.1007/s42417-022-00611-y.
  11. Ladipo, I.L. and Muthalif, A.G.A. (2012), "Wideband vibration control in multi-degree of freedom system: Experimental verification using Labview", Eng. Procedia, 14, 1235-1243. https://doi.org/10.1016/j.proeng.2012.07.306.
  12. Ormondroyd, J. and Den Hartog, J.P. (1928), "Theory of the dynamic vibration absorber", Trans. ASME, 50, 9-22. https://doi.org/10.1115/1.4058553
  13. Reina, F. and Rose, G.D. (2016), "Active vibration absorber for automotive suspensions: A theoretical study", Int. J. Heavy Vehic. Sys., 23(1), 21-39. https://doi.org/10.1504/IJHVS.2016.074625.
  14. Son, L., Bur, M., Rusli, M. and Adriyan, A. (2016), "Design of double dynamic vibration absorbes for reduction of two DOF vibration system", Struct. Eng. Mech., 57(1), 161-178. https://doi.org/10.12989/sem.2016.57.1.161.
  15. Sun, Y., Zhou, J., Gong, D. and Ji, Y. (2022), "Study on multi-degree of freedom dynamic vibration absorber of the car body of high-speed trains", Mech. Sci., 13, 239-256. https://doi.org/10.5194/ms-13-239-2022.
  16. Wei, J., Liu, W., Gao, P. and Ding, Y. (2023), "An analytical dynamic model for vibration suppression of a multi-span continuous bridge by tuned mass dampers", J. Marine Sci. Eng., 11(5), 1-17. https://doi.org/10.3390/jmse11051017.
  17. Wu, L. and Wang, K. (2023), "Optimization design and stability analysis for a new class of inerter-based dynamic vibration absorbers with a spring of negative stiffness", J. Vib. Control, 30(3-4), 822-836. https://doi.org/10.1177/10775463231151724.
  18. Yoon, G.H., Choi, H. and So, H.Y. (2021), "Development and optimization of a resonance-based mechanical dynamic absorber structure for multiple frequencies", J. Low Freq. Noise Vib. Active Control, 40(2), 880-897. https://doi.org/10.1177/1461348419855533.