• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.1
• /
• pp.68-76
• /
• 2004

Corestone ground mass has complicated characteristics as it is made up of hard and stiff corestone in a relatively weak and soft matrix. Model corestone ground mass whichis physically identical with the stiff corestone in weak matrix were tested in uniaxial compression. The tests showthat the increase of the corestone proportion brought the gradual increase of the elastic modulus as well. The ground mass was weaker when the corestone proportion was low while it was stronger in higher corestone proportion. The size of the corestone had no influence on the strength and elastic modulus as long as the proportion of the corestone remains same.

• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.89-99
• /
• 2007

This paper intends to introduce more objective and qualitative rock mass classification method easily applicable to the excavation of gneissic masses showing corestone weathering profiles. It is proven that corestone weathering profile could be divided with reasonable accuracy into digging, ripping and blasting layers using visual and simple mechanical techniques such as Schmidt hammer rebound test on cut slopes, taking into consideration strength and spacial distribution of corestone, workability and work efficiency of excavation. Also, seismic refraction surveys were employed for shallow investigations (down to $20{\sim}30m$ depth) in corestone weathering profile and conducted across the top of vertical exposures where the underlying geology could be directly inspected. Some discrepancies ($3{\sim}4m$ in average and 6 m occasionally) between the actual and assumed materials with respect to seismic velocities were observed. Thus it can be concluded that field geotechnical mapping and field seismic test should be used together in order to get a relatively good accuracy in assessing likely excavation conditions of corestone weather-ing profiles.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.327-333
• /
• 2004

Corestone ground mass has complicated characteristics as it is made up of hard and stiff corestone in a relatively weak and soft matrix. Model corestone ground mass which is physically identical with the stiff corestone in weak matrix were tested in uniaxial compression. The tests show that the increase of the corestone proportion brought the gradual increase of the elastic modulus as well. The ground mass was weaker when the corestone proportion was low while it was stronger in higher corestone proportion. The size of the corestone had no influence on the strength and elastic modulus as long as the proportion of the corestone remains same.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2007.03a
• /
• pp.130-139
• /
• 2007

We have carried out numerical compression experiments to estimate the mechanical properties (Mohr-Coulomb and elastic) of corestone-bearing saprolites in Beolgyo area. The studied saprolite, consisting of mechanically much stronger corestone and weaker matrix, is a weathering product of the Precambrian granitic gneiss in the Youngnam massif. Since the saprolite consists of larger corestones with diameter up to 2m, it is impossible to directly measure the mechanical properties by physical experiments. We have measured the mechanical properties of corestone and matrix from naturally occurring saprolite and have used them as a reference for our numerical model. Then, we mixed each material and carried out biaxial compression tests while varying the volume percentage of corestones from 0 to 57%. We found that both cohesion and internal friction angle increase with the volume percentage of corestones while elastic modulus remains constant. We found the results from numerical experiments are in contradiction to what is known from physical experiments using artificial saprolites. This may be due to a possibility that the sharp and discrete nature of interface between corestone and matrix in physical experiments differs from the gradual interfacial nature in numerical modelling and natural saprolites.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.1
• /
• pp.57-71
• /
• 2011

Granitic regolith profile in Goseong, southern Korea, reveals various types of corestones from unweathered round fresh rocks to decomposed rock cores with unweathered spheroidal rock-layers on outer surface, deep weathering profile with 10m in depth, and red saprolite usually cited as related to high temperature climatic environment. In respect of this optical features such as the depth and the color of the profile, Goseong granitic profile may be regarded as products of paleoclimate with more high temperature and humidity than the present. But it is revealed that halloysite is a predominant clay mineral in upper part as well as lower part by XRD analysis. Halloysite is dominant mineral in hydrothermal alteration milieu. The leaching rate of chemical components is up to 97%, very high compared to common granite profiles with 60~70% in Korean peninsula. So, it is assumed that granitic red regolith in Goseong is a product of hydrothermal alteration, not meteoric weathering.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.711-716
• /
• 2002

When judging the ground by core-logging, depth of coring might be stopped by coming into view of the moderately weathered rock and also considered as bedrock line. However, highly weathered rock may appear again, if coring more, because there are core-stones in the residual soil and highly weathered rock by the effect of hydraulic-thermal differentiation and does the irregular rock weathering or metamorphic rock region. Therefore, there are room for misunderstanding of diagnosing the moderately weathered rock. Even though the irregular ground where the corestones were come out will show clear geotechnical differences between the ground and the gradually weathered bedrock, nowadays, the construction sites do not take into account the characteristic of core-stone region. In conclusion, to study the failure-strength characteristics of soil layers containing core-stones, we made artificial core-stones and varied percentage of corestones, and measured cohesion and friction factors to adjust them to construction sites containing corestones such as slope, tunnel, and underground.

• Tunnel and Underground Space
• /
• v.5 no.4
• /
• pp.336-346
• /
• 1995

Geotechnical Information System (GTIS) for efficient management of three dimensional borehole data has been developed. Some problems were raised during the input process of borehole data, and alternative solutions were sought. According to the previous geotechnical reports, there is no unified weathering classification scheme. A criterion, 100 times/30cm from SPT, was turned out inappropriate to the discrimination of weathered rock from weathered soil. It has also been suggested that weathered soil, weathered rock, soft rock, and hard rock should be defined as CW, HW, MW, and SW~fresh condition. For better comparison of RQD, the use of NX size coring is recommended for the whole area although BX size coring has been used in excavated area. The limit of drilling depth up to 1 m from the top of surface of hard rock should be extended to avoid possible wrong interpretation of rock head due to the existence of corestone. The input data were analysed by geostatistical methods. It is found that the range in semivariogram is about 300m, and the variance of gneiss is greater than that of granite. It is because the granite data analysed came from almost single uniform rock mass(i.e.Seoul granite), but gneiss data came from the rock mass(i.e. Gyeonggi gneiss complex experienced several metamorphic metamorphic processes.

• Journal of the Korean Geographical Society
• /
• v.48 no.6
• /
• pp.803-818
• /
• 2013

In this study, a total of 80 rock formations in the romantic road(Nangmangado) were investigated and analyzed and the results are as follows. The area in where the rock formations landscape is seen the most is Yangyang(43 formations), and the formations are most densely concentrated in Jukdo beach when seen from the site group. The most observed landform is weathering landform(61%) and the rest is comprised of coastal landform(24%) and structural landform(15%). For weathering landform, Tafoni takes up the largest portion (33%) and is followed by Corestone(27%), Tor(22%), Gnamma(10%), Groove(4%) and Exfoliation(4%). Considering academic value, rarity and accessibility overall, the 35 landforms are expected to have high utility value as tourism resources and topography filed course. And out of these 35 landforms, 11 are concentrated in Dongsan beach in Yangyang. Therefore, it seems worthy to consider developing Dongsan beach under the name of "Dongsan Coast Rock Park(Tentative Name)" to be actively utilized as tourism resources. The landforms which are evaluated as highly valuable for geomorphology filed course are a total of 16 areas including Fan rock and Op rock formations. In these areas, typical weathering landforms are concentrated in one spot and two or three other types of landform can also be additionally observed, allowing the place to be highly efficient for field education.