• Title/Summary/Keyword: Fe content

Search Result 1,983, Processing Time 0.025 seconds

The Effect of Dietary Supplementation of Fe-methionine Chelate and FeSO4 on the Iron Content of Broiler Meat

  • Seo, S.H.;Lee, H.K.;Ahn, H.J.;Paik, I.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.21 no.1
    • /
    • pp.103-106
    • /
    • 2008
  • A broiler experiment was conducted to compare the effects of supplementary iron sources and levels on the iron content of broiler meat. Two hundred and fifty hatched Ross broiler chickens were randomly assigned to 5 dietary treatments. Each treatment had 5 replicates of 10 birds (5 males and 5 females). Birds were housed in raised floor batteries and fed traditional broiler diets ad libitum for 5 weeks. Dietary treatments were as follows: Control, Fe-Met 100 (100 ppm iron as Fe-methionine), Fe-Met 200, $FeSO_4$ 100 (100 ppm iron as $FeSO_4{\cdot}7H_2O$) and $FeSO_4\;200$. There were no significant differences among treatments in parameters related to production performance. Liver contained approximately 10 times more iron than the leg muscle which contained approximately 3 times more iron than either breast muscle or wing muscle. Significant differences in iron content in the broiler meat were observed. In the breast meat, Fe-Met treatments were significantly (p<0.05) higher than other treatments in iron content. In the leg meat, Fe-Met treatments and $FeSO_4\;200$ treatment were significantly higher than the control in iron content. In the wing muscle, Fe-Met 200 treatment was significantly higher than other treatments in iron content. Iron content in the liver was significantly influenced by source and supplementation level of iron. Fe-Met treatments were higher than $FeSO_4$ treatments and 200 ppm treatments were higher than 100 ppm treatments in iron content in the liver. It is concluded that iron-methionine chelate is more efficient than iron sulfate and 200 ppm iron supplementation as Fe-Met is recommended for maximum iron enrichment in broiler meat.

Effect of Fe, Mn Content on the Tensile Property of Al-4 wt%Mg-0.9 wt%Si Alloy System for High Pressure Die Casting (고압 금형 주조용 Al-4 wt%Mg-0.9 wt%Si계 합금의 인장특성에 미치는 Fe, Mn함량의 영향)

  • Kim, Heon-Joo
    • Journal of Korea Foundry Society
    • /
    • v.33 no.3
    • /
    • pp.103-112
    • /
    • 2013
  • Effect of Fe and Mn contents on the tensile properties of Al-4 wt%Mg-0.9 wt%Si alloy system has been studied. Common phases of Al-4 wt%Mg-0.9 wt%Si alloy system were ${\alpha}$-Al, $Mg_2Si$, ${\alpha}-Al_{12}(Fe,Mn)_3Si$ and ${\beta}-Al_5FeSi$. As Fe content of Al-4 wt%Mg-0.9 wt%Si alloy system increased from 0.15 wt% to above 0.3 wt%, ${\beta}-Al_5FeSi$ compound appeared. When Mn content of the alloy increased from 0.3 wt% to 0.5 wt%, morphology of plate shaped ${\beta}-Al_5FeSi$ compound changed to chinese script ${\alpha}-Al_{12}(Fe,Mn)_3Si$. As Fe content of Al-4 wt%Mg-0.9 wt%Si-0.3 wt%Mn alloy increased from 0.15 wt% to 0.4 wt%, tensile strength of the as-cast alloy decreased from 191 MPa to 183 MPa and, elongation of the alloy also decreased from 8.0% to 6.2%. Decrease of these properties can be explained as the formation of plate shape, ${\beta}-Al_5FeSi$ phase with low Mn/Fe ratio of the alloy. However, when Mn content of Al-4 wt%Mg-0.9 wt%Si-0.3 wt%Fe alloy increased from 0.3 wt% to 0.5 wt%, tensile strength of as-cast alloy increased from 181 MPa to 194 MPa and, elongation of the alloy increased from 6.8% to 7.0%. These improvements attribute to the morphology change from ${\beta}-Al_5FeSi$ phase to chinese script, ${\alpha}-Al_{15}(Fe,Mn)_3Si_2$ phase shape-modified from with high Mn/Fe ratio of the alloy.

Effect of Fe, Mn Content on the Castability in Al-9wt%Si-Mg System Alloys for High Elongation (고신율 금형주조용 Al-9wt%Si-Mg계 합금의 주조특성에 미치는 Fe, Mn함량의 영향)

  • Kim, Heon-Joo;Jeong, Chang-Yeol
    • Journal of Korea Foundry Society
    • /
    • v.33 no.6
    • /
    • pp.233-241
    • /
    • 2013
  • Effect of Fe and Mn contents on the castability of Al-9wt%Si-xMg-yFe-zMn alloy has been studied. The alloy was composed of ${\alpha}$-Al phase, Al+eutectic Si phase, ${\beta}$-Al5FeSi compound and chinese script ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compound. ${\beta}$-$Al_5FeSi$ and ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compounds assumed to effect the fluidity and shrinkage behaviors of the alloy during solidification due to the crystallization of ${\alpha}$-$Al_{15}(Fe,Mn)_3Si_2$ and ${\beta}$-$Al_5FeSi$ compounds above eutectic temperature. As Fe and Mn contents of Al-9wt%Si-0.3wt%Mg system alloy increased from 0.15wt% to 0.6wt% and from 0.3wt% to 0.7wt%, fluidity of the alloy decreased by 5.7% and 3.3%, respectively. And as Mg content of Al-9wt%Si-0.45wt%Fe-0.5wt%Mn system alloy increased from 0.3wt% to 0.4wt%, fluidity of the alloy decreased by 8.6%. When Fe content of the alloy increased from 0.15wt% to 0.6wt%, macro shrinkage ratio decreased from 6.1% to 4.1%, and micro shrinkage ratio increased from 0.04% to 0.24%. Similarly, Mn content of the alloy increased from 0.3wt% to 0.7wt%, macro shrinkage ratio decreased from 6.0% to 4.5% and micro shrinkage ratio increased from 0.12% to 0.18%. Judging from the castability of the alloy, Al-9wt%Si-0.3wt%Mg alloy with low content of Fe and Mn, 0.1wt% Fe and 0.3wt% Mn, is recommendable.

Effect of Fe, Mn Content on the Castability of Al-4%Mg-0.9%Si Alloys for High Pressure Die Casting (고압 금형 주조용 Al-4%Mg-0.9%Si 합금의 주조특성에 미치는 Fe, Mn 함량의 영향)

  • Kim, Heon-Joo
    • Journal of Korea Foundry Society
    • /
    • v.33 no.2
    • /
    • pp.55-62
    • /
    • 2013
  • Effect of Fe and Mn contents on the castability of Al-4wt%Mg-0.9wt%Si system alloy has been studied. According to the analysis of cooling curve for Al-4wt%Mg-0.9wt%Si-0.3wt%Fe-0.3/0.5wt%Mn alloy, ${\alpha}-Al_{15}(Fe,Mn)_3Si_2$ and ${\beta}-Al_5FeSi$ phases crystallized above eutectic temperature of $Mg_2Si$. Therefore, these phases affected both the fluidity and shrinkage behaviors of the alloy during solidification. As Fe and Mn contents of Al-4wt%Mg-0.9wt%Si system alloy increased from 0.1 wt% to 0.4 wt% and from 0.3 wt% to 0.5 wt% respectively, the fluidity of the alloy decreased by 26% and 33%. When Fe content of the alloy increased from 0.1 wt% to 0.4 wt%, 23% decrease of macro shrinkage and 19% increase of micro shrinkage appeared. Similarly, Mn content of the alloy increased from 0.3 wt% to 0.5 wt%, 11% decrease of macro shrinkage and 14% increase of micro shrinkage appeared. Judging from the castability of the alloy, Al-4wt%Mg-0.9wt%Si alloy with low content of Fe and Mn, 0.1 wt% Fe and 0.3 wt% Mn, is recommendable.

Effects of Fe-soy Proteinate Chelate Supplementation to Diets of Periparturient Sows and Piglets on the Fe Level in the Blood of Piglets

  • Im, Sun-Jae;Pang, Myung-Geol;Shin, Kwang-Suk;Rhee, Ah-Reum;Ebeid, T.A.;Paik, In-Kee
    • Journal of Animal Science and Technology
    • /
    • v.52 no.3
    • /
    • pp.221-228
    • /
    • 2010
  • The objective of the present study was to investigate the effects of Fe-soy proteinate chelate (Fe-SP) on sows milk, piglet blood parameters and performance. A total of 15 sows of 3 wk before parturition and pigs after births to 3 wk were assigned to three dietary treatments: control (sow-basal diet, piglets with Fe injection); Fe-SP 100 (Fe 100 ppm as Fe-SP in sow and piglet diet); Fe-SP 200 (Fe 200 ppm as Fe-SP in sow and piglet diet). Each treatment had 5 replicates (sows) of six piglets per sow randomly selected from the same offspring. For this experiment, Fe-SP was manufactured. There were no significant differences among treatments in number of pigs born in total or alive per litter, birth weight, number of pigs weaned per litter and weaning weight. However, weight gain, feed intake and feed conversion ratio significantly (p<0.05) decreased as the supplementation level of Fe-SP increased. There were no significant differences among treatments in Fe content at 3 wk before parturition in sow blood. However, Fe content at 2 wk before parturition in sow blood significantly (p<0.05) increased as the supplementation of Fe-SP. While there were no significant differences among treatments in Fe content at 1 wk before parturition in sow blood, it tended to increase as the supplementation level of Fe-SP increased. There were no significant differences among treatments in Fe content of sow milk. However, it tended to increase as the supplementation level of Fe-SP increased. Iron content in the blood of piglets was significantly (p<0.05) higher in control (Fe injected) than Fe-SP 100 and Fe-SP 200 treatments at $1^{st}$ and $2^{nd}$ wk but it was significantly higher in Fe-SP 200 than others in $3^{rd}$ wk. Zinc content in the blood also significantly (p<0.05) increased as the Fe-SP supplementation level increased in $3^{rd}$ wk. In conclusion, Fe-SP supplementation significantly affected Fe content in the blood of piglets. Iron injection was more effective at $1^{st}$ and $2^{nd}$ wk, while Fe-SP 200 supplementation was effective at $3^{rd}$ wk in improving blood Fe level in piglets.

Effects of $Fe_2O_3$ Addition on the Properties of MgO and Dolomite (마그네시아와 돌로마이트의 특성에 미치는 $Fe_2O_3$ 의 첨가영향)

  • 박재원;홍기곤
    • Journal of the Korean Ceramic Society
    • /
    • v.34 no.7
    • /
    • pp.738-746
    • /
    • 1997
  • MgO clinker and two kinds of dolomite clinkers with different microstructures and CaO contents were used as starting materials, and the effects of Fe2O3 addition on the properties of MgO and dolomite were investigated in the range of 2 to 8 wt% of Fe2O3 content. Secondary phases contributed to densification of MgO-Fe2O3 and dolomite-Fe2O3 were magnesioferrite and dicalciumferrite, respectively. Sinterabilities of MgO-Fe2O3 and dolomite-Fe2O3 were directly proportional to the amount of secondary phases. Also, sinterability of dolomite itself was dependent on the microstructure of starting material including distribution of CaO and MgO as well as the addition amount of Fe2O3. The flexural strength of MgO-Fe2O3 content was almost constant. The hydration resistance of dolomite with large size of MgO and discontinuous distribution of CaO was higher than that of dolomite with small size of MgO and continuous distribution of CaO. Also, the minimum content of Fe2O3 to prevent they hydration of dolomite was about 4wt%. As increasing Fe2O3 content, the penetration resistance of MgO-Fe2O3 was improved by the increment of magnesioferrite. On the other hand, the penetration resistance of dolomite-Fe2O3 was decreased because of the increment of dicalciumferrite having low melting point.

  • PDF

A Study on Hot Cracking in Ni-Base Superalloy Welds (I) - Effect of Fe Contents on Solidification Cracking Susceptibility in Weld Metal - (Ni기 초내열합금 용접부의 고온균열에 관한 연구(I) - 용접금속의 응고균열 감수성에 미치는 Fe의 영향 -)

  • ;;Kazutoshi Nishimoto
    • Journal of Welding and Joining
    • /
    • v.19 no.6
    • /
    • pp.614-621
    • /
    • 2001
  • A study was carried out to determine the solidification cracking susceptibility of Ni-base superalloy as a function of Fe content in base metal. Three kinds of Ni-base superalloys with three different levels of Fe content were used. The solidification cracking susceptibility was evaluated by the Trans-Varestraint test at four different strain levels. Quantitative analysis of crack revealed that the solidification crack length and the temperature range in which hot cracking occurred in fusion zone (Brittle Temperature Range, BTR) decreased with a decrease in Fe content. Further, the thermo-calc data indicated that the solidification temperature range also decreased with decreasing Fe content. From these results, it was deduced that the improvement of the solidification cracking susceptibility with decreasing Fe content was attributed to the decrease of the solidification temperature range.

  • PDF

Frictional Characteristics of Zn-Fe Alloy Electroplated Steel Sheets (Zn-Fe합금전기도금강판의 마찰특성)

  • 김영근;김명수
    • Journal of the Korean institute of surface engineering
    • /
    • v.28 no.1
    • /
    • pp.14-22
    • /
    • 1995
  • The effects of iron content in coated layer, surface roughness and lubricants on the formability of commercial Zn-Fe alloy electroplated steel sheets used for automotive bodies were investigated. The higher the iron content in deposit, the lower the friction coefficient of Zn-Fe alloy electroplated steel sheets. The surface roughness of coated layer hardly influenced the frictional characteristics. The formability of Zn-Fe alloy electroplated steel sheets was found to be more affected by the lubricant than by iron content in Zn-Fe alloy electrodeposit.

  • PDF

Co-deposition of Si Particles During Electrodeposition of Fe in Sulfate Solution (황산철 도금액 중 Si 입자의 공석 특성)

  • Moon Sung-Mo;Lee Sang-Yeal;Lee Kyu-Hwan;Chang Do-Yon
    • Journal of the Korean institute of surface engineering
    • /
    • v.37 no.6
    • /
    • pp.319-325
    • /
    • 2004
  • Fe thin films containing Si particles were prepared on metallic substrates by electrodeposition method in sulfate solutions and the content of codeposited Si particles in the films was investigated as a function of applied current density, the content of Si particels in the solution, solution pH, solution temperature and concentration of $FeSO_4$$7H_2$O in the solution. The amount of Si codeposited in the film was not dependent on the applied current density, solution pH and solution temperature, while it was dependent on the content of Si particles in the solution and the concentration of $FeSO_4$$7H_2$O in the solution. The amount of Si codeposited in the film increased with increasing content of Si particles in the solution but reached a maximum value of about 6 wt% when the content of Si particles in the solution exceeds 100 g/l. On the other hand, the content of Si codeposited in the film increased up to about 17 wt% with decreasing concentration of $FeSO_4$$7H_2$O in the solution. These results would be applied to the fabrication of very thin Fe-6.5 wt% Si sheets for electrical applications.

Magnetic and Magnetostrictive Properties of Amorphous Sm-Fe and Sm-Fe-B Thin Films

  • Choi, Y.S.;Lee, S.R.;Han, S.H.;Kim, H.J.;Lim, S.H.
    • Journal of Magnetics
    • /
    • v.3 no.2
    • /
    • pp.55-63
    • /
    • 1998
  • Magnetic and magnetostrictive properties of amorphous Sm-Fe and Sm-Fe-B thin films are systematically investigated over a wide composition range from 14.1 to 71.7 at.% Sm. The films were fabricated by rf magnetron sputtering using a composite target composed of an Fe (or Fe-B) plate and Sm chips. The amount of B added ranges from 0.3 to 0.8 at. %. The microstructure, examined by X-ray diffraction, mainly consists of an amorphous phase in the intermediate Sm content range from 20 to 45 at.%. Together with an amorphous phase, crystalline phases of Fe and Sm also exist at low and high ends of the Sm content, respectively. Well-developed in-plane anisotropy is formed over the whole compositionrange, except for the low Sm content below 15 at.% and the high Sm content above 55 at %. As the Sm content increases, the saturation magnetization decreases linearly and the coercive force tends to increase, with the exception of the low Sm content where very large magnitudes of the saturation magnetization and the coercive force are observed due to the existence of the crystalline $\alpha$-Fe phase. The coercive force is affected rather substantially by the B addition, resulting in lower values of the coercive force in the practically important Sm content range of 30 to 40 at.%. Good magnetic softness indicated by well-developed in-plane anisotropy, a square-shaped hysteresis loop and a low magnitude of the coercive force results in good magnetostrictive characteristics in both Sm-Fe-B thin films. The magnetostrictive characteristics, particularly at low magnetic fields, are further improved by the addition of B; for example, at a magnetic field of 100 Oe, the magnitude of magnetostriction is -350 ppm in a Sm-Fe thin film and it is -470 ppm in a B containing Sm-Fe thin film.

  • PDF