• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.13-20
• /
• 2010

The development of the console for exterior advertizing LCD Panel(LCD Console) is the purpose of this study with regard to importance of display industry. In this study, the most important point is to develop the cooling system for LCD Console. It is developed by using systematic application techniques and statistical tests and analysis to integrate commercial components, cooling fan, heat sink, thermo electronic modules etc, of it. This study, at first, shows design/manufacturing process of the cooling system and the setting process of control factors to control through experimentation. Next, after constructing the complete console, 46 inch LCD Panel and the cooling system are built in, the performance test of it is shown through experimentation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.964-967
• /
• 2009

A new hybrid-type touch screen panel (TSP) has been developed based on a-Si:H TFT which can detect the change of both $C_{LC}$ and photo-current. This TSP can detect the difference of $C_{LC}$ between touch and no-touch states in unfavorable conditions such as dark ambient light and shadows. The hybrid TSP sensor consists of a detection area which includes one TFT for photo sensing and two TFTs for amplification. Compared to a single internal capacitive TSP or an optical sensing TSP, this new proposed hybrid-type TSP enables larger sensing margin due to embedding of both optical and capacitive sensors.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.67-75
• /
• 2002

This paper presents a PLD design of Gray Mode Graphic STN LCD drive circuit using PC interface. The proposed LCD drive circuit doesn\`t use microprocessor for the convenience of users. Thus, the LCD drive circuit can transfer efficiently image data created under PC to LCD. The LCD drive circuit which is modelled in schematic capture, AHDL and VHDL is simulated in functionally through the use of ALTERA MAX+PLUS II. Also, timing simulation is performed by ALTERA EPM7192SQC160-15 PLD implementation. The PC interface part have been programmed in MS-Visual C++ 6.0. The validity and efficiency of the proposed LCD drive circuit have been verified by test board. After comparing this LCD drive circuit to specify it was verified that the developed LCD drive circuit showed good performances, such as convenience of users, low cost.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.161-168
• /
• 2006

In this paper, we propose a method for the pattern inspection of LCD module using the color compensation and pattern matching. The pattern matching is generally used for the inspection method of LCD module at the industry. LCD module has many defections such as the brightness difference of the back light, the optic feature of liquid crystal, the difference of the light penetrated by driving LCD and the color difference by the lighting. The conventional method without the color compensation can not solve these defections and decreases the efficiency of inspecting LCD module. The method proposed to inspect defective badness through the pattern matching after it compensated color difference of the LCD occurred by the various causes. At first, it revises with setting by standard tone of color with the LCD pattern of the reference image. And It perform the preprocessing and pattern matching algorithm on the compensated image. In experiment, we confirmed that this algorithm is useful to detect some defections of LCD module. The proposed methods was easy to detect the faulty product.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1255-1261
• /
• 1995

The development of LCD Simulation program has been targeted to the design and estimation of LCD in an efficient, reasonable and proper method. In developing this program, we have got the theoretical construction for analysis of LCD. Moreover, we've applied CAE to the field of LCD, and thus we could help finding the optimal condition of LCD design or new type of LCD. This software can be applied for the modes such as TN, mono-STN, B/W STN(DSTN, FSTN), color STN, TFT, reflective modes and the program can be developed for other modes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.26-29
• /
• 2004

S-PVA is a new technology which enables screen quality advantages over S-IPS and MVA, including high transmittance, >1000:1 contrast ratio, sub-10ms response time, and wide angle of view with no off-axis image inversion and undetectable gamma distortion. This new technology will be described in detail. This paper also addresses the other remaining performance issues facing LCD-TV, including Samsung's plans for addressing these challenges. For example, until recently, inter-gray response time and associated motion blur were significant issues for achieving LCD-TV images quality. Samsung has invented DCC-II technology to achieve sub-10ms response time, and this achievement is described herein. Other technology advancements, including next-generation color performance and ultra-low black performance and improvement of off axis image quality are also discussed in this paper.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.148-149
• /
• 2006

TFT-LCD BLU has been remarkably developed for a recent few years as TFT-LCD market is increased. Recently new BLU technologies and components are developed as more aggressively than before since TFT-LCD panel requires higher quality and resolution. Especially Samsung Electronics and LG Philips LCD of Korea are major LCD panel makers and the major optical materials of LCD BLU and panel for Samsung Electronics have been supplied by Samsung Cheil Industries. In this presentation introduction to main components of LCD BLU will be investigated details. Also characteristics and applications of optical polymers such as PMMA, PET etc for LCD display will be included and finally recent trends in optical materials for LCD BLU will be shown briefly.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1602-1605
• /
• 2008

We considered most general electron emission caused by temperature as well as electric field with a free electron gas model. The total electron emission current density comes from field emission effect where electron energy is lower than vacuum and from thermionic emission effect where electron energy is higher than vacuum. The total electron emission current density is shown as a function of temperature for constant electric field, and as a function of electric field for constant temperature.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.947-950
• /
• 1999

The PLD design of new scheme LCD driver circuit is described in this paper. A new scheme LCD driver circuit doesn't used microprocessor for the convenience of users. A new scheme LCD driver circuit consists of 4 main parts, that is, a serial/parallel communication control block part, a LCD controller part, a LCD driver part and a RAM/ROM control block part. The validity and efficiency of the proposed LCD driver circuit have been verified by simulation and by ALTERA EPM7192SQC160-15 PLD implementation in VHDL. After comparing this LCD driver circuit to specify it was verified that the developed LCD driver circuit showed has good performances, such as low cost, convenience of users.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.793-796
• /
• 2005

A structure and a design of device were developed to fabricate large-scale active matrix organic light-emitting diode (AMOLED) display with good color purity and high aperture ratio. With these technologies, we developed a full color 14.1 inch WXGA AMOLED display. For the integration of OLED on an active matrix a-Si TFT backplane, an efficient top emission OLED is essential since the TFT circuitry covers a large position of the pixel aperture. These technologies will enable up the OLED applications to larger size displays such as desktop monitors and TVs.