• Title/Summary/Keyword: Road Charging

Search Result 29, Processing Time 0.022 seconds

Guaranteed GNSS-based Road Charging Applications through User-Level Integrity

  • Mark, Audrey;Schortmann, Joaquin Cosmen;Olague, Miguel Angel Martinez;Merino, Miguel Romay
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • v.2
    • /
    • pp.77-82
    • /
    • 2006
  • Integrity plays a fundamental role in the feasibility of 'liability critical' applications. Road charging, e.g. road tolling in urban zones or on highways, represents a series of liability critical applications where a guarantee in integrity could be a true enabler: being the mechanism that prevents the incorrect charging of users and enabling the advancement of these applications using GNSS such as Galileo and EGNOS that provide integrity mechanisms. However, the integrity of the end user position is not guaranteed by the EGNOS and Galileo integrity services alone as provided. Algorithms have been developed to supply a guarantee on the performance attainable at the user level through the provision of a horizontal protection level that responds to local user conditions such as multipath or interference. In addition, an application has been developed that implements road charging mechanisms based on the availability of user-level integrity. Results obtained show that the user-level integrity algorithms provided the required level of integrity guarantee and granularity of the horizontal protection levels necessary for executing urban and rural (highway) road charging. In addition, the road charging application developed shows that the current application domain requirements can be met through the provision of guaranteed integrity and that further reductions in the horizontal protection levels along with increased signal availability will enable future road charging modalities.

  • PDF

A Topological Transformation and Hierarchical Compensation Capacitor Control in Segmented On-road Charging System for Electrical Vehicles

  • Liu, Han;Tan, Linlin;Huang, Xueliang;Guo, Jinpeng;Yan, Changxin;Wang, Wei
    • Journal of Power Electronics
    • /
    • v.16 no.4
    • /
    • pp.1621-1628
    • /
    • 2016
  • Experiencing power declines when the secondary coil is at the middle position between two primary coils is a serious problem in segmented on-road charging systems with a single energized segmented primary coil. In this paper, the topological transformation of a primary circuit and a hierarchical compensation capacitor control are proposed. Firstly, the corresponding compensation capacitors and receiving powers of different primary structures are deduced under the condition of a fixed frequency. Then the receiving power characteristics as a function of the position variations in systems with a single energized segmented primary coil and those with double segmented primary coils are analyzed comparatively. A topological transformation of the primary circuit and hierarchical compensation capacitor control are further introduced to solve the foregoing problem. Finally, an experimental prototype with the proposed topological transformation and hierarchical compensation capacitor control is carried out. Measured results show that the receiving power is a lot more stable in the movement of the secondary coil. It is a remarkable fact that the receiving power rises from 10.8W to 19.2W at the middle position between the two primary coils. The experimental are in agreement with the theoretical analysis.

A Study on safety against a fire of charging cable for mobile phone for vehicle (자동차용 모바일 폰 충전 케이블의 발화 안전성에 관한 연구)

  • Kwon, Jin-Wook;Choi, Kyu-Sik;Hwang, Myung-Whan
    • Journal of the Korea Safety Management & Science
    • /
    • v.20 no.3
    • /
    • pp.21-26
    • /
    • 2018
  • This paper describes result of a study on safety against a fire of charging cable for mobile phone for vehicle. Combustion on the USB cable in the car was happened while driving. Gas coming from the burning USB cable could be a reason which can make a secondary car accident since the driver also can be embarrassed while driving. In order to prevent a secondary car accident connected on the road, to research a reason why USB cable can emit gas and be burned in charging. We did simulation test with abnormal fault condition for the electronic component on the board in the USB cable. So we get the result from abnormal fault condition simulation test, for instance, shorted test for output terminal of 8 pin switch, shorted test for chip resistor after thermal aging in the condition $25^{\circ}C$, 93 % RH during 48 hours. To analysis the result of all test, Combustion on the USB cable was not the 8 pin but other electrical component such as a chip resistor. Therefore we guess that the reason for USB cable combustion in charging in a car was not 8 pin and a LED but another defective component.

Secured Authentication Scheme and Charging & Discharging System Operation for Electric Vehicles (정보보호를 고려한 전기자동차 충방전 시스템의 인증과 운영에 관한 연구)

  • Lee, Sunguk
    • The Journal of the Convergence on Culture Technology
    • /
    • v.7 no.1
    • /
    • pp.551-557
    • /
    • 2021
  • With increase of electric vehicle in the road, the number of charging/discharging infrastructure for electric vehicle in public space is also increased rapidly. To charge or discharge the electric vehicle the user of electric vehicle and service provider should verify the each other's identity to minimize security vulnerability. This paper proposes mutual authentication scheme between electric vehicle and charging/discharging service provider with help of hash function and Message Authentication Code(MAC). Also efficient operating scheme for charging/discharging service system is proposed. The analysis shows that the system has robustness against security vulnerability. Also this system can keep the sensitive personal information of service user safely.

Role and Operation Algorithm of a Battery Management Systems (EV용 BMS의 역할과 운전 알고리즘)

  • 이재문;최욱돈;이종필;이종찬
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.6 no.6
    • /
    • pp.467-473
    • /
    • 2001
  • BMS(Battery Management System) in EV system(Electric Vehicle) senses voltage, temperature and the charging or discharging current of batteries. The main roles of BMS are to estimate SOC(State OF Charge) of batteries and optimally monitor them according to the operation state of EV system which is motoring mode or charging mode. In this paper, we propose the proper algorithm about BMS's roles and operation which is suitable to EV system and illustrate validity and effectiveness through the experiments which were performed in the condition of Vehicle road test and charging test.

  • PDF

Operating Characteristics of Superconducting Wireless Power Transfer System for Electric Vehicle Charging (전기차 충전을 위한 초전도 무선전력전송 시스템의 동작 특성)

  • Chung, Yoon-Do;Lee, Chang-Young;Kim, Dae-Wook
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.22-23
    • /
    • 2015
  • As wireless power transfer (WPT) technology using strongly coupled electromagnetic resonators is a recently explored technique to realize the large power delivery and storage without any cable or wire, this technique is required for diffusion of electric vehicles (EVs) since it makes possible a convenient charging system. Typically, since the normal conducting coils are used as a transmitting coil in the CPT system, there is limited to deliver the large power promptly in the contactless EV charging system. From this reason, we proposed the combination CPT technology with HTS transmitting antenna, In this study, we examined the improvement of transmission efficiency and properties for HTS and copper antennas, respectively, at 30 cm distance. Thus, we obtained improved transfer efficiency with HTS antenna over 10% compared with copper antenna

  • PDF

Study on Discharge Electrode Design applied for Road Tunnel (터널용 전기집진시스템 개발을 위한 방전극 설계)

  • Kim, Jong-Ryul;Weon, Jong-Oung;Jang, Chun-Man
    • Proceedings of the SAREK Conference
    • /
    • 2009.06a
    • /
    • pp.1238-1243
    • /
    • 2009
  • As Social Overhead Capital(SOC) has been expanded, the highway road construction has been accelerated and city road system has been more complicated. So, long road tunnels have been increased and traffic flow rate also has been raised. Accordingly, the exhausting gas of vehicle cars seriously deteriorates the tunnel inside air quality and driving view. In order to improve tunnel inside air quality, it is needed to introduce a compulsory ventilation system as well as natural ventilation mechanism. The former, that is, a special compulsory ventilation facility is very useful and helpful to prevent a tunnel of being contaminated by traffic in most case. In the case of obtaining clearer and longer driving view, the ventilation systems have to be considered in order to remove floating contaminants or exhaust gas from engines. In this paper, discharge electrode design technology will be discussed.

  • PDF

User charges of transport infrastructures and economic theories (교통시설 사용료 산정 원칙과 경제이론)

  • 최진석;이광석;한은영
    • Proceedings of the KSR Conference
    • /
    • 2001.10a
    • /
    • pp.74-82
    • /
    • 2001
  • This paper sets out what can be said in general about pricing within transport sectors. In this paper we briefly restate the economic principles of pricing that hold for two transport sectors-road and rail. This is used as a basis for a discussion of pricing principles in the transport sector. Here we focus on the pricing of user charges of transport infrastructures. We start this paper to analyse road transport sector and compare it with rail sector. In fact as a result of the trend towards rail reform, the issue of charging mechanisms for the use of rail infrastructure has become increasingly important. In this paper, we just take the problem in theory and present some foreign cases. But our long-run objective will be the design of efficient user charges of infrastructures based on fair intermodal competition.

  • PDF

A Basic Study of the Snow Melting System for the Anti-Freezing Road using the Pulsating Heat Pipe (PHP를 이용한 도로융설 시스템에 관한 기초연구)

  • Kim, J.S.;Ha, S.J.;Son, K.J.
    • Journal of Power System Engineering
    • /
    • v.14 no.3
    • /
    • pp.19-24
    • /
    • 2010
  • The purpose of this study is to develop a snow melting system using the pulsating heat pipe(PHP). The experimental apparatus is consisted of a PHP, a concrete structure, a constant water thermostatic bath and a flowmeter. The experiment was performed at the outdoor air temperature of $-8^{\circ}C$ and inlet temperature of hot water of $75^{\circ}C$. PHP is the closed and non-loop type heat exchanger which is charging R-410A as an operating fluid. As experimental results, the temperature profile of vertical and horizontal orientation of concrete structure was measured with operating time. The heat flux of the snow melting was required more than 300 $W/m^2$. We confirmed that the snow melting system using the PHP was useful for anti-freezing road.

Performance Evaluation for Application of Large Capacity LPB Pack Equipped to Series Hybrid Articulated Vehicle (직렬형 하이브리드 굴절차량용 대용량 LPB 팩의 적용 및 성능 평가)

  • Lee, Kang-Won;Mok, Jai-Kyun
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.25 no.11
    • /
    • pp.930-937
    • /
    • 2012
  • Newly developed Series hybrid low-floor articulated vehicle which can meet both road and railway running conditions. It has the rated driving speed of 80 km/h and three driving modes with hybrid(engine+battery) driving mode, engine driving mode, battery driving mode. The battery driving mode requires the several 10 km running without additional charging operation. The vehicle has been equipped with LPB (lithium polymer battery) pack for the series hybrid propulsion system. LPB pack consists of 168 cells (3.7 V in a cell, 80 Ah) in series, DC Circuit breaker, mechanical rack, BMS (battery management system). This paper has shown the design process of LPB pack and application to the vehicle. Driving results in the road was successful to be satisfied with the requirement of the series hybrid vehicle.