• 한국포장학회지
• /
• 제19권2호
• /
• pp.61-65
• /
• 2013

Modified atmosphere (MA) of reduced $O_2$ and elevated $CO_2$ concentrations has been used for keeping the quality of fresh produce and extending the shelf life. As a way to attain the beneficial MA package around the produce, a gas diffusion tube or perforation can be attached onto the container and controlled on real time in its opening/closing responding to $O_2$ and $CO_2$ concentrations measured by gas sensors. The timely-controlled opening of the gas diffusion tube can work in harmony with the produce respiration and help to create the desired MA. By use of the mathematical modeling, the effect of tube dimension on the controlled container atmosphere was figured out in this study. Spinach and king oyster mushroom were used as typical commodities for designing the model container system (0.35 and 0.9 kg in 13 L, respectively) because of their respiration characteristics and the optimal MA condition ($O_2$ 7~10%/$CO_2$ 5~10% for spinach; $O_2$ 2~5%/$CO_2$ 10~15% for mushroom). With a control logic for the gas composition to stay as close as possible to optimum MA window without invading injurious low $O_2$ and/or high $CO_2$ concentrations, the atmosphere of the sensor-controlled container could stay at its lower $O_2$ boundary or upper $CO_2$ limit under certain tube dimensional conditions. There were found to be the ranges of the tube diameter and length allowing the beneficial MA. The desired range of the tube dimension for spinach consisted of combinations of larger diameter and shorter length in the window of 0.3~2 cm diameter and 0.2~10 cm length. Similarly, that for king oyster mushroom was combinations of larger diameter and shorter length in the window of 0.9~2 cm diameter and 0.2~3 cm in length. Clear picture on generally affordable tube dimension range may be formulated by further study on a wide variety of commodity and pack conditions.

• 한국식품저장유통학회지
• /
• 제20권3호
• /
• pp.289-295
• /
• 2013

차압예냉시스템을 설계하기 위해서는 송풍저항을 정확하게 예측해야 하며, 송풍저항은 청과물의 적재방법에 따라 크게 달라진다. 본 연구는 차압예냉시스템에서 송풍량에 따른 송풍저항식과 상자의 적재방법별로 송풍저항을 측정할 수 있는 모델을 개발하기 위하여 수행되었다. 공을 퇴적한 모형상자에서의 송풍저항은 빈 상자에서의 송풍저항과 공 퇴적층만의 송풍저항을 합한 값보다 1.5배 정도 높게 나타났다. 또한, 적재상자에서의 송풍저항은 통기폭 방향 적재상자수의 증가에 따라 지수적으로 증가하였으나, 적재길이와 적재높이의 영향은 거의 받지 않았다. 상자를 2열로 적재하는 차압예냉시스템에서 송풍저항은 1개 상자에서의 송풍저항을 기초로 예측이 가능하였으며, 예측모델을 제시하였다.

• 한국환경보건학회지
• /
• 제30권4호
• /
• pp.329-343
• /
• 2004

We conducted to investigate citizen's attitude to the treatment of food waste in Yongin city. The respondent of $41.81\%$ throws the food waste eliminate from home and store less than 1l in Yongin. When they dump the food waste, they speak out the inconvenience of damaged envelope by animals in case of home and store. This caused troubles for reason of sanitary. So a local autonomous entity must carefully consider of expand use specially designed container as like apartment house. They give an answer that the collecting time of food waste is suitable form dawn till morning. This answer shows the satisfaction of the period time to collect the food waste. They prefer to be appointed the exclusive place to collect food waste. The service interval of collect is suitable 1 time a day. They want to increase the number of washing of the collecting container. This is good method for sanitary condition, but the care of the period time to collect the food waste is more efficient than the care of the number of washing the collecting container. The care of the period time minimizes to incur the enmity of the people and to pollute in environment. The major of respondent handled the food waste after keeping the basket or a kit. This fact shows to us almost citizen doesn't feel the seriousness to remove the moisture of the food waste. Recently, many solutions which can be disposal efficiently are getting magnified and improved owing to increase utilities channel to loss in quantities and dry the food waste. We expect the reduction of food waste is solved getting easily step by step. The results of the awareness about the facility of food waste show citizen prefer recycling facility to the other facilities. If recycle facility and incineration facility are constructed, they were worried about bed smell. When some facility of the food waste is constructed, they have to maintain and to handle not to incur the enmity of the people. The spread rate of specially designed container already increased, the citizen set a high value on the use of specially designed container more than amount-rate vinyl envelope that people have used for several years. In the cost treatment about food waste, the major respondent answered the use cost of specially designed container is suitable price. So we can know the use charge is proper level. The majority of citizen more prefer autonomous plan which voluntary atmosphere creation and public information by mass media than levy system and rising treatment cost which forced plan. The citizens have pretty positive thinking of incineration, so the government needs more efforts for a public notice, which includes the incineration is no more than abandoned thing. Each of local self government has to sort the food waste and make kind of resource system related to collecting and carrying, constructing a suitable facility, proper disposal of the food waste and producing harmless in our surrounding in order to solve the invisible problems. To do above mentioned things, we have to analyze referred several problems till now. Also, to minimize the side effect, the government will have to improve through enforce the system.

• 한국포장학회지
• /
• 제12권2호
• /
• pp.87-90
• /
• 2006

식품 보관 용기로서 옹기의 기능성을 설명하려는 하나의 시도로서 옹기의 열특성과 수분 흡착 및 기체 흡착 특성을 측정하였다. 옹기의 열전도도와 열확산도는 기공율이 증가함에 따라 감소하였으며, 비열은 기공율보다는 구성 흙의 조성에 의존하는 것으로 나타났다. 옹기의 열차단성은 유리와 비슷하였으며, 금속포장재보다는 높은 열차단성을 가지나, 종이 및 플라스틱보다는 낮은 열적 차단성을 가졌다. 옹기는 상대습도 90% 기준에서 원료 흙에 관계없이 약 0.0005 g/g 건물 기준의 수분을 흡착할 수 있었으며, 약간의 $CO_2$ 및 에틸렌 가스를 흡착할 수 있었다 ($CO_2$약 $17{\mu}g/g$, 에틸렌 가스 약 $2.6{\mu}g/g$). 옹기의 열특성과 기체 흡착특성은 식품보관에 이용될 수 있는 독특한 특성을 가지는 것으로 평가되었다.

• 한국식품영양과학회지
• /
• 제46권11호
• /
• pp.1366-1372
• /
• 2017

본 실험은 36주(9개월) 동안 오미자음료의 저장용기 및 저장온도에 따른 이화학적 품질 특성을 비교 분석하였다. 저장 3주부터 흡광도는 저장용기에서 고도로 유의적인 차이를 보였고, 총 가용성 고형분 함량은 저장용기, 저장온도, 저장용기${\times}$온도 등 모든 요인에서 고도로 유의한 차를 나타냈다. 총 페놀성 화합물, 총산도는 투명병 처리, 갈색병 처리 모두 저장후기에 조금 감소하였고, pH는 조금 증가하였다. 전반적으로 $4^{\circ}C$ 저장이 $20^{\circ}C$ 및 $36^{\circ}C$ 저장보다 오미자음료 품질 특성 변화가 적었다. 각 인자들의 상관성을 분석한 결과 저장기간에 의한 흡광도, 가용성 고형분, 총 페놀성 화합물, pH, 총산도는 모두 각각의 항목들에 대한 양의 상관관계를 보였다. 오미자음료의 투명병 처리는 저장기간이 경과되면서 오미자음료의 흡광도 감소에 많은 영향을 주는 것으로 나타났다. 갈색병 처리는 9개월 동안 품질 변화가 적었고, 각각의 저장온도에 의한 안전성이 확인되었다. 위 결과로 보아 갈색병 처리는 36주 동안 오미자음료 품질유지에 적합한 것으로 생각된다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.79-88
• /
• 2022

Recently, securing stable supply of fresh food is deemed as one of the important tasks. Accordingly, now the presence of cold chain along with the needs of a comfortable and healthy life is growing as the online market expands and the contactless industry grows, however, cold chain is being studied only in the aspect of ground and sea transportation. And, due to global warming and strengthening global environmental regulations, we believe that it is necessary to convert the existing road-centered logistics system into a railway-centered logistics system, a low-carbon transportation means. Therefore, in this paper we calculated the maximum energy required by the reefer container as a basic research necessary for constructing the low temperature distribution and cold chain based on the reefer container railway, and conducted a study on methods of supplying the reefer container power utilizing 1. tramline, 2. battery, 3. generator. The results of this paper can be utilized as a foundational study for building a cold chain based on a reefer container dedicated to freight trains in the future.

• Journal of Biosystems Engineering
• /
• 제31권3호
• /
• pp.161-167
• /
• 2006

The purpose of this study is to find the optimal conditions of PCM slurry manufacturing equipment for saving the marketing cost and keeping the original quality of products. In addition, the characteristics of the movable container for shipping or distributing products is analysed. The major results are as follows. 1. PCM thermal storage system is designed with the conditions of temperature($-5{\sim}10^{\circ}C$), cold chain time(30 minutes), and one time usage(50 liter). This system includes tank, freezer, circulating pump, cycle type heat exchanger, swelling tank, equipment of supplying PCM supplying unit includes cold tank, cycle type heat exchanger, suction unit and control equipments, etc. 2. After ability test of PCM thermal storage system, it shows that the required freezing time of PCM thermal storage system is less than one of the previous system. The reason is that churn (top and bottom) and compulsion circulation are occurred simultaneously and unit cooler type method is better than chiller type method. 3. By the experiment of transportation latent heat container, it is decided that the best container is $K_1$ with latent heat temperature($0{\sim}5^{\circ}C$) and density(0.15%). However, for $K_l\;and\;K_2$, it is necessary more studies on latent heat thermal conditions and conditions of making method.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권1호
• /
• pp.194-200
• /
• 2021

This study proposes a plan to construct an integrated platform that reduces manufacturing costs and efficiently produce by integrating the systems of main producers, production subcontractors, and raw material subcontractors for the production of food packaging containers. The production plan of food packaging containers and raw materials is established in real time between the main producers, production subcontractors, and raw material subcontractors in consideration of the demand characteristics of each product. It establishes basic information that all processes from the production planning stage to the forwarding stage of the product are linked to each other. The progress of each producer of interlinked processes is shared in real-time to improve productivity and quality of food packaging containers and raw materials and reduce manufacturing costs. By monitoring the system of the main producer and the production subcontractor in real time, the production of food packaging containers is performed in a timely manner, thereby improving productivity. The application of the plan-do-check-action (PDCA) process, which includes planning, execution, evaluation and improvement in the production operation processes of the main producer, production subcontractor and raw material subcontractor, enables improved production compliance rate. The contents of the main producers, production subcontractors, and raw material subcontractors are managed in real time, then a converged production management system is established through the platform proposed in this study to ensure timely supply and demand of raw materials without delay in ordering.

• 한국식품영양학회지
• /
• 제26권4호
• /
• pp.753-758
• /
• 2013

메밀 속성 장 프리믹스의 최적 조건을 확립하고자 품질특성을 조사하였다. 소금량(8, 10, 12%)에 따른 품질특성 결과, 대장균 군수는 소금량 10, 12%(21일), 8%(28일) 이후로 검출되지 않았으며, B. subtilis HJ18-4를 starter로 첨가한 군은 발효 7일부터 검출되지 않았다. 아미노태 질소 함량은 21일까지 급격히 증가하였으며, 그 후로 완만히 증가하였다. 그 결과, 소금 함량 10%, starter 첨가 시 보다 안전한 발효가 이루어졌다. 가수량(1:1, 1:1.5. 1:1.8)의 따른 품질특성 결과, 총균수와 아미노태 질소 함량은 가수량이 적을수록 높았으며, 1:1 혼합(35일)일 때 아미노태 질소 함량은 169.5mg%로 가장 높았고, 발효 28일 이후 대장균 군이 검출되지 않았다. 용기별(항아리, 유리, 플라스틱)의 품질특성 결과, 총균수와 아미노태 질소 함량은 유리 용기 대비 플라스틱과 항아리 용기가 높았으며, 대장균군도 보다 빨리 감소하였다. Batch size(1.25 kg, 2.5 kg)를 달리하여 제조된 메밀 속성 장의 품질특성 결과, 총균수와 아미노태 질소 함량은 batch size에 따른 큰 차이가 없었으며, 대장균 군 측정 결과, 14일째 2.5 kg($3.00{\times}10^2$ CFU/g), 1.25g ($1.25{\times}10^3$ CFU/g)으로 나타났다. 메밀 속성 장 프리믹스의 최적 조건은 가수량 1:1, 소금의 양 10%, B. subtilis HJ-18-4를 starter로 첨가, 항아리 및 플라스틱 용기는 3주, 유리 용기는 4주 발효시키는 것이 바람직하였다.

• 월간포장계
• /
• 통권243호
• /
• pp.108-114
• /
• 2013