• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.5
• /
• pp.664-670
• /
• 2016

Cheonggukjang (CKJ) is a Korean traditional food made of fermented soybeans. In comparison to normal intake of soybeans, Cheonggukjang has high digestibility with bioactive, antioxidant substances, and thrombolytic enzymes. Recent studies have reported anti-oxidant, anti-cancer, anti-inflammatory, anti-obesity activities as well as inhibitory activities against osteoporosis for CKJ. In this study, we identified the effects of CKJ on osteoblast differentiation by increasing the polyglutamic acid (PGA) content of CKJ. Alkaline phosphatase (ALP) activity and mineralization significantly increased in response to treatment with both natural CKJ (CKJ A) and PGA-increased CKJ (CKJ B). However, CKJ B exhibited higher ALP activity and mineralization than CKJ A. Real-time reverse transcription PCR demonstrated that mRNA expression of osteoblastic-associated genes such as type I collagen, alkaline phosphatase, osteocalcin, and osteopontin in C2C12 cells was significantly up-regulated by CKJ A or B treatment. These results indicate that treatment with CKJ has an anabolic effect on bone by increasing osteoblastic differentiation and ALP activity. Increasing PGA content in CKJ had a greater effect than CKJ A on up-regulation of osteoblastic gene expression in osteoblast cells.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.171-172
• /
• 2010

• Toxicological Research
• /
• v.34 no.1
• /
• pp.23-29
• /
• 2018

Ethanol-induced fat accumulation, the earliest and most common response of the liver to ethanol exposure, may be involved in the pathogenesis of liver diseases. Isoliquiritigenin (ISL), an important constituent of Glycyrrhizae Radix, is a chalcone derivative that exhibits antioxidant, anti-inflammatory, and phytoestrogenic activities. However, the effect of ISL treatment on lipid accumulation in hepatocytes and alcoholic hepatitis remains unclear. Therefore, we evaluated the effect and underlying mechanism of ISL on ethanol-induced hepatic steatosis by treating AML-12 cells with 200 mM ethanol and/or ISL ($0{\sim}50{\mu}M$) for 72 hr. Lipid accumulation was assayed by oil red O staining, and the expression of sirtuin1 (SIRT1), sterol regulatory element-binding protein-1c (SREBP-1c), AMP-activated protein kinase (AMPK), and peroxisome proliferator-activated receptor alpha ($PPAR{\alpha}$) was studied by western blotting. Our results indicated that ISL treatment upregulated SIRT1 expression and downregulated SREBP-1c expression in ethanol-treated cells. Similarly, oil red O staining revealed a decrease in ethanol-induced fat accumulation upon co-treatment of ethanol-treated cells with 10, 20, and $50{\mu}M$ of ISL. These findings suggest that ISL can reduce ethanol induced-hepatic lipogenesis by activating the SIRT1-AMPK pathway and thus improve lipid metabolism in alcoholic fatty livers.

• Toxicological Research
• /
• v.23 no.2
• /
• pp.159-164
• /
• 2007

Toxicity screening of a newly developed oral heparin derivative were carried out in 6 male cynomolgus monkeys (Macaca fascicularis), composed of a treatment group and vehicle control group. A newly orally active heparin derivative, developed by Seoul National University, was once given to treatment group at dose of 500 mg/kg. A treatment group did not show any change in body weights, hematological parameters including platelet-related varivables (platelet, PDW, PCT, MPV) and serum biochemical parameters (e.g., AST, ALT, BUN, etc.) for 2 weeks compared with those of vehicle control group. We also confirmed the maximum plasma concentration (Cmax, 1.73 IU/ml) and the time (Tmax, 1 hr) to reach Cmax. The present study will be valuable in the proper interpretation for nonclinical study using cynomolgus monkeys in the development of new drug of heparin derivative.

• Journal of Veterinary Clinics
• /
• v.35 no.4
• /
• pp.137-140
• /
• 2018

A five-month-old toy poodle was referred for treatment of bilateral mandibular fractures. Preoperative skull and dental radiographs showed rostral mandibular fractures and permanent teeth that had not yet erupted. In addition to providing stability for the healing of fractures, it is very important to focus on restoring normal occlusion. The mandibular fractures were repaired using interdental wiring in a dentate area where the deciduous canines and fourth premolars were stable and could be used to anchor the interdental fixation. In the absence of an erupted permanent mandibular first molar, the modified Risdon wiring was performed using the deciduous mandibular fourth premolars as anchor teeth. An intraoral splint was placed on the mandibular teeth using self-curing composite resin. Five months after surgery, the patient had experienced no complications, and the permanent teeth had erupted normally. In this case, which involves a small-breed puppy with deciduous dentition, treatment with a wire-reinforced interdental splint using intact deciduous fourth premolar teeth as anchor teeth can be considered as a suitable method for rostral mandibular fracture restoration.

• Journal of the Korean Ceramic Society
• /
• v.51 no.6
• /
• pp.533-538
• /
• 2014

Today, silicon and epoxy resin are used as materials of conversion lenses for white LEDs on the basis of their good bonding and transparency in LED packages. But these materials give rise to long-term performance problems such as reaction with water, yellowing transition, and shrinkage by heat. These problems are major factors underlying performance deterioration of LEDs. In this study, in order to address these problems, we fabricated a conversion lenses using glass, which has good chemical durability and is stable to heat. The fabricated conversion lenses were applied to a remote phosphor type. In this experiment, the conversion lens for white LED was coated on a glass substrate by a screen printing method using paste. The thickness of the coated conversion lens was controlled during 2 or 3 iterations of coating. The conversion lens fabricated under high heat treatment temperature and with a thin coating showed higher luminance efficiency and CCT closer to white light than fabricated lenses under low heat treatment temperature or a thick coating. The conversion lens with $32{\mu}m$ coating thickness showed the best optical properties: the measured values of the CCT, CRI, and luminance efficiency were 4468 K, 68, and 142.22 lm/w in 20 wt% glass frit, 80 wt% phosphor with sintering at $800^{\circ}C$.

• Journal of Trauma and Injury
• /
• v.24 no.2
• /
• pp.75-81
• /
• 2011

Purpose: The aim of this study was to analyze the influence of a trauma team's management. Methods: A total of 181 patients with severe trauma were retrospectively divided into two groups. Of these 181 patients, 81 patients without a trauma team admitted between April and October 2008 were assigned to Group 1, and 100 patients with a Trauma team admitted between April and October 2009 were assigned to Group II. We compared general characteristics, the length of stay in the emergency department (ED) and treatment outcomes (24-h packed RBC transfusion, length of intensive care unit (ICU) stay, length of hospital stay, in-hospital mortality, 24-h mortality) between these two groups. Results: The length of stay in the ED was significantly reduced in Group II compared to Group I ($p$=0.025). No significant differences were found in mean arterial pressure, Glasgow Coma Scale, Revised Trauma Score, Injury Severity Score, in-hospital mortality and 24-h mortality between the two groups. However, Group II had a lower amount of 24-h packed RBC transfusion and a shorter length of ICU and hospital stay than Group I, although these differences were not statistically significant. Conclusion: Through the establishment of a trauma team, the length of stay in the ED can be reduced remarkably. Furthermore, the need for 24-h packed RBC transfusions and the length of stay in the ICU and hospital were found to be decreased in patients managed by a trauma team.

• Korean Journal of Materials Research
• /
• v.26 no.1
• /
• pp.22-28
• /
• 2016

In this study, we fabricated high quality color conversion component with green/red phosphor and low melting glass frit. The color conversion component was prepared by placing the green and red phosphor layer on slide glass via screen printing process. The properties of color conversion component could be controlled by changing coating sequence, layer thickness and heat treatment temperature. We discovered that optical properties of color conversion component were generally determined by the lowest layer. On the other hand, the heat treatment temperature also affected to correlated color temperature (CCT) and color rending index (CRI). The color conversion component with a green (lower) - red (upper) layer which was sintered at $550^{\circ}C$ showed the best optical properties: CCT, CRI and luminance efficacy were 3340 K, 78, and 56.5 lm/w, respectively.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.480-484
• /
• 2013

Since SiOC was introduced as an anode material for lithium ion batteries, it has been studied with different chemical compositions and microstructures using various silicon based inorganic polymers. Poly(phenyl carbosilane) is a SiOC precursor with a high carbon supply in the form of the phenyl unit, and it has been investigated for film applications. Unlike any other siloxane-based polymers, oxygen atoms must be utilized in an oxidation process, and the amount of oxygen is controllable. In this study, SiOC anodes were prepared using poly(phenyl carbosilane) with different heat treatment conditions, and their electrochemical properties as an anode material for lithium ion batteries were studied. In detail, cyclic voltammetry and charge-discharge cycling behavior were evaluated using a half-cell. A SiOC anode which was prepared under a heat treatment condition at $1200^{\circ}C$ after an oxidation step showed stable cyclic performance with a reversible capacity of 360 mAh/g.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.3
• /
• pp.189-199
• /
• 2024

PURPOSE. This study was conducted to evaluate the effects of plasma treatment of sandblasted and acid-etched (SLA) titanium implants on surface cleansing and osseointegration in a beagle model. MATERIALS AND METHODS. For morphological analysis and XPS analysis, scanning electron microscope and x-ray photoelectron spectroscopy were used to analyze the surface topography and chemical compositions of implant before and after plasma treatment. For this animal experiment, twelve SLA titanium implants were divided into two groups: a control group (untreated implants) and a plasma group (implants treated with plasma). Each group was randomly located in the mandibular bone of the beagle dog (n = 6). After 8 weeks, the beagle dogs were sacrificed, and volumetric analysis and histometric analysis were performed within the region of interest. RESULTS. In morphological analysis, plasma treatment did not alter the implant surface topography or cause any physical damage. In XPS analysis, the atomic percentage of carbon at the inspection point before the plasma treatment was 34.09%. After the plasma treatment, it was reduced to 18.74%, indicating a 45% reduction in carbon. In volumetric analysis and histometric analysis, the plasma group exhibited relatively higher mean values for new bone volume (NBV), bone to implant contact (BIC), and inter-thread bone density (ITBD) compared to the control group. However, there was no significant difference between the two groups (P > .05). CONCLUSION. Within the limits of this study, plasma treatment effectively eliminated hydrocarbons without changing the implant surface.