배전용 케이블 종단접속재의 경년특성

Aging Characteristics of Cable Terminations for Distribution Power System

  • 발행 : 1999.08.01

초록

Aging characteristics of 13 years service-aged distribution cable terminations which dismounted from 3 regions were investigated by material characterization and electrical test. All dismounted terminations have propagating micro-cracks on the surface of weathershed and chalking fillers from bulk. Elemental analysis of these terminations showed that the carbon was decreased and the oxygen was increased on the surface of weathershed due to a little oxidation reaction. Contact angle of terminations was abnormally increased with time. In the analysis of anti-oxidation ability and chemical structure, there were no differences between new and dismounted terminations. All terminations showed satisfactory results in electrical test. Therefore, itcan be considered that aging is only propagating on the surface of dismounted terminations. Also, it was confirmed that environmental factors such as UV, pollution and salt have an effect on the aging through the observation of polymer composition change.

키워드

참고문헌

  1. EPRI Reports, EL-6207 Diagnostic Techniques for Cable Characterization EPRI
  2. IEEE std. 48 High-Volatage Alternating-Current Cable Terminations
  3. ASTM Std. D3895-80 Oxidative Induction Time of Polyolefins by Thermal Analysis
  4. IEEE Trans. Power Delivery v.6 no.2 Surface Structural Changes of Naturally Aged Silicone and EPDM Composite Insulators A. E. Vlastos;S. M. Gubanski
  5. Electrical Properties of Polymers C. C. Ku;R. Liepins
  6. KEPRI Report, TR.95YJ16.L199787 배전케이블 수명예측 기준결정 및 열화진단 시스템 구축 KEPRI
  7. IEEE Trans. Power Delivery v.5 no.4 Surface Hydrophobicity of Polymers Used for Outdoor Insulation R. S. Gorur(et al.)
  8. STRI Guide 3 Field Inspection of Composite Insulators
  9. J. Appl. Polym. Sci. v.41 The Surface Migration of Extender Oil in EPDM Vulcanizates M. Zinbo;L. M. Skewes;A. N. Theodore
  10. IEEE trans. Power Delivery v.7 no.2 Aging in Silicone Rubber Used for Outdoor Insulation R. S. Gorur(et. al.)