개별 부하모델링을 위한 부하의 합리적인 특성실험

Reasonable Load Characteristic Experiment for Component Load Modeling

  • 지평식 (충주대학교 전기전자 및 정보공학과) ;
  • 이종필 (대덕대학교) ;
  • 임재윤 (대덕대학교 컴퓨터 전기전자계열) ;
  • 추진부 (한전전력연구원) ;
  • 김정훈 (홍익대학교 전자전기공학부)
  • 발행 : 2002.02.01

초록

Load modeling is classified into two methods according to approaching method, so called the measurement and component-based method. The measurement method is to model the load characteristics measured directly at substations and feeders. But it is difficult to measure continuously load characteristics from naturally occurring. system variation. The component-based method consists of the fellowing process; component load modeling, composition rate estimation and aggregation of component loads, etc. In this paper, the characteristic experiment of component loads was performed to obtain data for the component load modeling as the component-based method. At first, representative component loads were selected by the proposed method considering the accuracy of load modeling and the performance possibility of component load experiment in the laboratory. Also an algorithm was Proposed to identify the reliability of data obtained from the component load characteristic experiments. In addition, the results were presented as the case studies.

키워드

참고문헌

  1. IEEE Task Force on Load Representation for Dynamic Performance, 'Load representation for dynamic performance analysis', IEEE Trans. on Power Systems. Vol. 8, No. 2, pp. 472-482, May 1993 https://doi.org/10.1109/59.260837
  2. H. Lee Willis, 'Spatial Electric Load Forecasting', Marcel Dekker, Inc. 1996
  3. Y. Liang, 'Dynamic Reactive Load Model', IEEE T-PWRS, Nov. 1998 https://doi.org/10.1109/59.736278
  4. B. Kirby, 'Generator Response to Intrahour Load Flucts', IEEE T-PWRS, Nov. 1998 https://doi.org/10.1109/59.736279
  5. E.H. Baracat, 'Methodology for Weekly Load Forecasting,' IEEE T-PWRS https://doi.org/10.1109/59.736304
  6. J.Y. Lim, J.H. Kim, J.O. Kim, C. Singh, 'Application of Expert System to Load Composition Rate Estimation Algorithm,' IEEE Trans. on Power System, Vol. 14, No. 3, pp. 1137-1143, Aug. 1999 https://doi.org/10.1109/59.780944
  7. T. Dovan, T.S. Dillon, C.S. Berger, K.E. Forward, 'A Microcomputer Based on-Line Identification Approach to Power System Dynamic Load Modeling,' IEEE Trans. on PWRS, Vol. PWRS-2, pp. 529-536, 1987
  8. Ali Abur, Antonio, 'Bad Data Identification When Using Ampere Measurement,' IEEE Trans. on Power System, Vol. 12, No. 2, pp. 831-836, May 1997 https://doi.org/10.1109/59.589708
  9. G.T. Heydt, E. Gunther, 'Post-Measurement Processing of Electric Power Quality Data', IEEE Trans. on Power Delivery, Vol. 11, No. 4, pp. 1853-1859, Oct. 1996 https://doi.org/10.1109/61.544267
  10. 한국전력공사 전력경제처, '가전기기별 전력소비행태 조사', 1995
  11. 한국전력공사 전력경제처, '계약종별.산업별 부하곡선 자료집', 1997. 10
  12. 한국전력공사 전력계획처, '계약종별.산업별 부하곡선 자료집Ⅱ', 1999. 2
  13. A.P. Alves da Silva, V.H. Quintana, G.K.H. Pang, 'Solving Data Acquisition and Processing Problems in Power System Using a Pattern Analysis Approach', IEE Proceedings-C, Vol. 138, No. 4, pp. 365-376, July 1991 https://doi.org/10.1049/ip-c.1991.0046
  14. John Neter, Michael H. Kunter, etc, Applied Linear Statistical Models, IRWIN, 1999
  15. Bruce L. Bowerman etc, Linear Statistical Models an Applied Approach, Duxbury, 1999
  16. 이종필 외, '부하모델 구축을 위한 개별부하 특성실험과 자료의 신뢰성 확보에 관한 연구', 대한전기학회 전력계통연구회 춘계학술대회 논문집, pp. 35-38, 2000. 5
  17. P. Kundur, Power System Stability and Control, McGraw-Hill, pp. 271-314, 1994
  18. Roderick J. Frowd, Robin Podmore, Mark Waldron, 'Synthesis of Dynamics Load Models for Stability Studies', IEEE Trans. on Power Apparatus and Systems, Vol. PAS-101, No. 1, pp. 127-135, January 1982 https://doi.org/10.1109/TPAS.1982.317330