전기화재의 발생원인 및 분석에 관한 연구 - 전선의 열해석을 통하여 -

A Study on the Causes and the Analysis of Electrical Fires - focused on Heat Analysis for Electrical Wires-

  • 발행 : 2002.12.01

초록

오늘날 전기화재의 정확한 원인분석과 조사가 전계-열계해석 소프트웨어의 발전에 힘입어 전계-열계 해석 이론을 바탕으로 컴퓨터 시뮬레이션에 의해 체계적으로 연구되고 있으나, 매우 미흡한 실정이다. 따라서 본 논문에서는 상기의 상황에 기초해서 국내 L사 제품(600V, VVF : Three Core)의 전선을 모델로 하여 과부하 및 단락사고시 발생되는 전류 크기 및 열화시간에 따른 전선의 열해석을 전계-열계 유한요소법(Flux2D)를 통하여 컴퓨터 시뮬레이션 하고자 한다.

Nowaday, with the growth of software for electro-thermal analysis, it has been studied the precise analysis and investigation of cause for the electrical fire using computer simulation on the basis of theory for electro-thermal analysis. But it is very lacking for the precise analysis and investigation of cause for the electrical fire. In this paper, we have simulated the thermal analysis for electrical wire according to the value of current and deteriorating time in a overload and a short with the electrical wire of the L's company product(600 V VVF : Three core) using the elec-tro-thermal finite element method(Flux2D).

키워드

참고문헌

  1. 행정자치부 소방국, 2000 화재 통계 연보 (2001)
  2. 최충석 외 5인, '전기화재공학', 동화기술, pp.165-211(2000)
  3. 李聖一, 成樂晋, '電氣災害 防止工學', 연학사, pp.269-274(2000)
  4. 박용환, 양승용, '단면결함 전선에서의 화재 발생 메카니즘 연구', 한국화재 . 소방학회 추계학술대회 논문집, pp.61-67(2001)
  5. 오홍석, etc., '저압 배선선로의 과부하 및 단락사고 발생시 전선의 열해석에 관한 연구', 한국화재 . 소방학회논문지 , Vol. 16, No. 3, pp.56-60(2002)
  6. Bok-ki Kim, Kuo-Ta Hsieh, Francis X, and Bostick, 'A Three-Dimensional Finite Element Model for Thermal Effect of Imperfect Electric Contacts', IEEE Trans. on MAG., VoL 35, No. 1, pp.170-174(1999) https://doi.org/10.1109/20.738397
  7. H. Huh and W. J. Kang, 'Electrothermal Analysis of Electric Resistance Spot Welding Processes by a 3-D Finite Element Method', Journal of Materials Processing Technology 63, pp.672-677, (1997) https://doi.org/10.1016/S0924-0136(96)02705-7