A Study on Analysis of Characteristics Combustion of Floor Covering Materials

바닥내장재의 연소특성 분석에 관한 연구

  • Received : 2010.03.19
  • Accepted : 2010.04.16
  • Published : 2010.06.30

Abstract

In this study, we analyzed the combustion characteristics of four different floor covering materials(wood, monorium, laminatedpaper, and varnish-laminated paper) with regard to their ignitibility, thermal characteristics and flame retardancy by using an ignition temperature tester, a dual cone calorimeter, a thermogravimetric analyzer and limited oxygen index, for their fire risk assessment. According to the result, monorium had the lowest ignition temperature of $325^{\circ}C$ and the laminated paper and the varnish-laminated paper promptly ignited before 7s. Further, the wood showed the largest total heat release of $100MJ/m^2$, and the varnish-laminated paper showed the highest peak heat release rate. From the thermogravimetric analysis, it was shown that all specimens underwent rapid weight loss at $300{\sim}400^{\circ}C$. The limit oxygen indices of the laminated paper and the varnish-laminated paper were in the range of 20~21%, while it was 34% for wood. This study enabled us to confirm that wood, laminated paper and varnish-laminated paper have a relatively short ignition time and are easy to burn but they all have low heat release. In contrast, wood showed the lowest fire risk among them and had excellent flame retardancy but with high heat release.

본 연구에서는 건축물 내장재 가운데 바닥재의 화재특성을 평가하기 위하여 목재, 모노륨, 장판지, 니스코팅 된 장판지 등 4종의 바닥재를 대상으로 콘칼로리미터, 발화온도시험기, 열중량분석기, 한계산소지수시험기 등을 이용하여 착화성, 발열특성, 난연성과 같은 연소특성을 분석하였다. 모노륨은 발화온도가 $325^{\circ}C$로 가장 낮았으며, 장판지와 니스코팅 된 장판지는 비교적 빠른 시간인 7초 이전에 착화가 시작되었다. 총열방출량은 목재가 $100MJ/m^2$로 가장 높게 나타났지만 최대열방출율은 니스코팅된 장판지가 가장 높은 것으로 나타났다. 열중량분석 결과, 모든 바닥재들이 $300{\sim}400^{\circ}C$ 온도구간에서 급격한 중량감소를 보였으며, 한계산소지수는 장판지와 니스코팅 된 장판지가 20~21% 정도이고 목재는 34%로 나타났다. 본 연구결과를 살펴보면, 모노륨, 장판지, 니스코팅 된 장판지는 착화가 빠르고 연소가 용이한 반면, 발열량은 낮은 것을 알 수 있었으며, 목재는 비교적 착화위험성이 낮고 난연성은 좋지만 발열량이 높은 것으로 나타났다.

Keywords

References

  1. 건축법 (2005) 건축물의 피난.방화구조 등의 기준에 관한 규칙. 5조-7조.
  2. 김기홍, 전상철, 류경옥 (1996) 폐플라스틱의 열분해를 통한 자원 회수. 한국폐기물학회논문집, 한국폐기물학회, 제13권, 제4호, pp.504-513.
  3. 김영범, 송석정 (1993) 열분석기의 원리 및 응용. 고분자과학기술, 제4권, 제5호, pp.387-397.
  4. 박영근 (2001) 고분자재료의 연소가스 독성평가에 관한 연구. 한국화재소방학회 논문집, 한국화재소방학회, 제15권, 제3호, pp.7-13.
  5. 소방방재청 (2005) 화재통계연감.
  6. 진영화, 정태호 (2002) 건축용 바닥재 화재시험방법의 국제적 동향. 한국화재보험협회 부설 방재시험연구원. 방재기술, 제33호.pp.18-20.
  7. 홍순정, 오세천, 이해평, 김희택, 류경옥 (1999) PVC의 열분해특성에 관한 연구. 한국화학공학회회지, 한국화학공학회, 제37권, 제4호, pp.515-521.
  8. 홍윤명, 정국삼 (1992) 安全工學實驗. 동화기술.
  9. ASTM E 1342 (1994) "Standard test methods heat and smoke release rates for materials and products using on oxygen consumption calorimeter ASTM".
  10. ISO 5660-1 (2002) "Reaction to fire part 1, rate of heat release from building products(Cone Calorimeter)". Generer.
  11. KS F 2271 (1990) "Test Method for Incombustibility Finish Material and Procedure of Building".