DOI QR코드

DOI QR Code

Consideration of Physical and Compression Characteristics among Western and Southern Coastal Marine Clays - Incheon·Mokpo·Gwangyang·Busan -

서·남해안 해성점토의 물리·압축특성 고찰 - 인천·목포·광양·부산 -

  • 김상귀 (삼부토건(주) 기술연구실) ;
  • 여규권 (삼부토건(주) 기술연구실) ;
  • 김길수 (삼부토건(주) 기술연구실) ;
  • 김홍연 (삼부토건(주) 기술연구실)
  • Received : 2011.03.21
  • Accepted : 2011.04.29
  • Published : 2011.06.01

Abstract

Marine clays are widely distributed in Korean eastern, western and southern coastal areas. Understanding engineering characteristics of the soft ground is very important, whenever civil structures are constructed in those coastal areas. It is because the ground is composed of highly compressible marine clay. In this paper, the physical and compression characteristics of Incheon, Mokpo, Gwangyang and Busan marine clay were analyzed and the characteristics between western and southern coastal marine clays were compared. For this, test results of 1,471 samples from 114 sites were used. As a result, Incheon clay showed the lowest plasticity and the highest unit weight due to influx of silt from the Yellow River and the turn of the tide of Incheon area. However, Gwangyang clay showed highly compressible characteristic due to extensive reclamation. On the other hand, Mokpo and Busan clay showed partially similar levels of characteristics. The compression index of Mokpo and Busan clay was high more than twice in comparison with Incheon clay and that of Gwangyang clay was higher than seventy percents in comparison with Mokpo and Busan clay.

국내의 동 서 남해안에는 해성점토층이 폭넓게 분포되어 있으며, 해안지역에서 기반시설물을 설계할 때 압축성이 큰 해성점토로 구성된 연약지반의 공학적 특성을 파악하는 일은 매우 중요하다. 본 논문에서는 인천, 목포, 광양 및 부산지역 해성점토의 물리적 압축특성을 분석하여 각 지역 및 우리나라 서 남해안 점토특성을 비교하였다. 이를 위하여 114구역 1,471개 샘플의 실험결과를 이용하였다. 비교결과, 인천점토의 경우 중국 황하로부터 유입된 세립실트 및 높은 조수간만의 차로 가장 낮은 소성 및 높은 단위중량을 보였고, 광양점토는 광범위한 준설매립의 영향으로 압축성이 가장 컸다. 그와 비교할 때 목포 및 부산의 경우는 부분적으로 비슷한 수준의 특성을 나타내었다. 목포와 부산점토의 압축지수는 인천에 비하여 2배 이상, 광양점토의 경우는 목포 및 부산에 비해 70% 이상 높게 나타났다.

Keywords

References

  1. 김덕곤, 곽정민, 정성교, 조기영(2002), 부산점토의 퇴적환경에 따른 압축특성, 2002년도 학술발표회 논문집, 대한토목학회, pp. 285-288.
  2. 김상규(1987), 우리나라 연약지반의 실태, 대한토목학회지, Vol. 35, No. 6, pp. 14-21.
  3. 송만순(1988), 우리나라 해성점토의 토질계수의 상관관계, 석사학위논문, 한양대학교, pp. 1-79.
  4. 윤길림, 김병탁(2003), 국내 해양지반에 적합한 압축지수 예측식 제안, 대한토목학회논문집, Vol. 23, No. 3C, pp. 169-176.
  5. Arulrajah, A.(2005), Field Measurements and Back-Analysis of Marine Clay Geotechnical Characteristics under Reclamation Fills, Ph.D. Dissertation, Curtin University of Technology, Bentley, Western Australia, Australia, pp. 1-313.
  6. Cozzolino, V. M.(1961), Statistical Forecasting of Compression Index, Proc. of 5th Int. Conf. on Soil Mech. and Found. Engrg., Paris, France, Vol. 1, pp. 51-53.
  7. Kim, S. K.(1975), Engineering Characteristics of Marine Clays in Korea, Proc. of 15th Asian Regional Conf. on SMFE, Vol. 1, pp. 35-43.
  8. Nishida, Y.(1956), A Brief Note on Compression Index of Soil, J. Soil Mech. and Found. Eng., ASCE, Vol. 82, No. 3, pp. 1-14.
  9. Rao, S. N. and Mathew, P. K.(1995), Effects of Exchangeable Cations on Hydraulic Conductivity of a Marine Clay, Clays and Clay Minerals, Vol. 43, No. 4, pp. 433-437. https://doi.org/10.1346/CCMN.1995.0430406
  10. Sowers, G. B.(1970), Introductory Soil Mechanics and Foundations, 3rd Ed., The Macmillan Company, London, England, pp. 102.
  11. Terzaghi, K. and Peck, R. B.(1967), Soil Mechanics in Engineering Practice, 2nd Ed., John Wiley and Sons Inc., New York, pp. 729.