Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Shaving Shear-Welding Process for Overlapped Aluminum Plates

중첩된 알루미늄 판재의 셰이빙 전단접합에 관한 연구

  • Shang, L. (Department of Production Automation Engineering, The Graduate School, Pukyong National University) ;
  • Kim, T.H. (Department of Production Automation Engineering, The Graduate School, Pukyong National University) ;
  • Jin, I.T. (Department of Mechanical Engineering, Pukyong National University)
  • Received : 2012.08.27
  • Accepted : 2012.11.26
  • Published : 2012.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Shaving shear-welding is a solid-state welding process, which utilizes plastic deformation of surplus material. The solid-state nature of this process contributes to high integrity and strength of the weld. The objective of this study was to investigate the effects of process variables on the material flow patterns and identify the process condition for obtaining the best weld. FEM simulations were carried out along with experimental characterizations. The results showed the importance of the cutter angles and the overlap lengths, and helped attain the optimum shaving shear-welding die and the best process condition.

Keywords

References

  1. C. W. Park, J. G. Paeng, J. S. Ok, 2012, A Study on Numerical Thermo-Mechanical Analysis for Aluminum 6061 Friction Stir Welding, J. Kor. Soc. Precis. Eng., Vol. 29, No. 6, pp. 632-639. https://doi.org/10.7736/KSPE.2012.29.6.632
  2. J. H. Cho, M. H. Kim, J. W. Choi, 2012, Application of Friction Stir Welding Processes for Aluminum Alloy Boat, J. Kor. Welding Joining Soc., Vol. 30, No. 2, pp. 135-140. https://doi.org/10.5781/KWJS.2012.30.2.135
  3. K. K. Lee, I. T. Jin, 2006, Proc. Kor. Soc. Manuf. Process Eng. Conf.(M. K. Ha), Kor. Soc. Manuf. Process Eng., Jinju, Korea, pp. 381-384.
  4. J. H. Lee, T. H. Kim, M. Y. Lee, I. T. Jin, 2010, A Study on Welding Strength of Extru-Riveting Process of Aluminum Plates, Trans. Mater. Process, Vol. 19, No. 8, pp. 460-467. https://doi.org/10.5228/KSTP.2010.19.8.460
  5. H. Y. Wu, S. Lee, Y. H. You, 2002, Genuine Solidstate Bonding Characteristics of Superplastic Alalloys, J. Mater. Process. Technol., Vol. 122, No. 2-3 pp. 226-231. https://doi.org/10.1016/S0924-0136(02)00006-7
  6. K. K. Lee, M. Y. Lee, I. T. Jin, 2010, A Study on Extru-Shear Welding(ESW) Process of Aluminum Plates, Trans. Mater. Process, Vol. 19, No. 8, pp. 452-459. https://doi.org/10.5228/KSTP.2010.19.8.452
  7. I. T. Jin, 2006, Apparatus and Method for Hot Bonding Metal Plates, Korea Patent, 10-0622524.

Cited by

  1. Electric Resistance Heated Friction Stir Spot Welding of Overlapped Al5052 Alloy Sheets vol.24, pp.4, 2015, https://doi.org/10.5228/KSTP.24.4.256