A Study on the Dynamic Analysis of Railway Vehicle by Using Track Coordinate System

트랙좌표계를 이용한 철도차량의 동역학 해석에 관한 연구

  • Kang, Juseok (Department of Railway Vehicle System Engineering, Korea National University of Transportation)
  • 강주석 (한국교통대학교 철도차량시스템공학과)
  • Received : 2012.06.13
  • Accepted : 2012.08.29
  • Published : 2013.03.01


Rail geometries such as cant, grade and curvature can be easily represented by means of a track coordinate system. In this analysis, in order to derive a dynamic and constraint equation of a wheelset, the track coordinate system is used as an intermediate stage. Dynamic and constraint equations of railway vehicle bodies except the wheelset are written in the Cartesian coordinate system as a conventional method. Therefore, whole dynamic equations of a railway vehicle are derived by combining wheelset dynamic equations and dynamic equations of railway vehicle bodies. Constraint equations and constraint Jacobians are newly derived for the track coordinate system. A process for numerical analysis is suggested for the derived dynamic and constraint equations of a railway vehicle. The proposed dynamic analysis of a railway vehicle is validated by comparison against results obtained from VI-RAIL analysis.



Supported by : 한국연구재단


  1. J. B. Ayasse and H. Chollet, "Determination of the Wheel Rail Contact Patch in Semi-Hertzian Conditions," Vehicle System Dynamics, Vol.43, No.3, pp.161-172, 2005.
  2. J. Piotrowski and H. Chollet, "Wheel-rail Contact Models for Vehicle System Dynamics including Multi-point Contact," Vehicle System Dynamics, Vol.43, No.6-7, pp.455-483, 2005.
  3. A. C. Zolotas, J. T. Pearson and R. M. Goodall, "Modelling Requirements for the Design of Active Stability Control Strategies for a High Speed Bogie," Multibody System Dynamics, Vol.15, pp.51-66, 2006.
  4. J. Pombo, J. Ambrosio, M. Pereira, R. Lewis, R. Dwyer-Joyce, C. Ariaudo and N. Kuka, "A Study on Wear Evaluation of Railway Wheels based on Multibody Dynamics and Wear Computation," Multibody System Dynamics, Vol.24, pp.347-366, 2010.
  5. M. Bozzone, E. Pennestri and P. Salvini, "Dynamic Analysis of a Bogie for Hunting Detection through a Simplified Wheel-rail Contact Model," Multibody System Dynamics, Vol.25, pp.429-460, 2011.
  6. H. Sugiyama, T. Sekiguchi, R. Matsumura, S. Yamashita and Y. Suda, Wheel/rail Contact Dynamics in Turnout Negotiations with Combined Nodal and Non-conformal Contact Approach, Multibody System Dynamics, Vol.27, pp.55-74, 2012.
  7. A. A. Shabanaa, K. E. Zaazaaa, J. L. Escalonab and J. R. Sanyc, "Development of Elastic Force Model for Wheel/rail Contact Problems," Journal of Sound and Vibration, Vol.269, pp.295-325, 2004.
  8. A. A. Shabana, K. E. Zaazaa and H. Sugiyama, Railroad Vehicle Dynamics a Computational Approach, CRC Press, USA, 2008.
  9. C. Rathod and A. A. Shabanaa, "Rail Geometry and Euler Angles," ASME J. of Computational and Nonliner Dynamics, Vol.1, pp.13-15, 2006.
  10. J. Kang, "A Three Dimensional Wheelset Dynamic Analysis Considering Wheel-rail Two Point Contact," J. of Korean Society for Railway, Vol.15, No.1, pp.1-8, 2012.
  11. O. Polach, "A Fast Wheel-rail Forces Calculation Computer Code," Vehicle System Dynamics Supplement, Vol.33, pp.728-739, 1999.
  12. J. Kang, "A 3-dimensional Wheel-rail Contact Analysis of Railway Vehicle, with 2-point Contacts," Transactions of KSAE, Vol.18, No.3, pp.43-52, 2010.
  13. P. E. Nikravesh, Computer-aided Analysis of Mechanical Systems, Prentice-Hall, Englewood Cliffs, 1988.
  14. S. S. Kim and M. J. Vanderploeg, "QR Decomposition for State Space Representation of Constrained Mechanical Dynamicsystems," Journal of Mechanisms, Transmissions and Automation in Design, Vol.108, pp.183-188, 1986.
  15. Using Matlab Ver.6, The Mathworks Inc., Natick, MA, USA, 2004.