DOI QR코드

DOI QR Code

Progressive collapse resistance of flat slabs: modeling post-punching behavior

  • 투고 : 2012.04.05
  • 심사 : 2013.08.29
  • 발행 : 2013.09.01

초록

Post-punching resistance of a flat slab can help redistribute the gravity loads and resist progressive collapse of a structure following initial damage. One important difficulty with accounting for the post-punching strength of a slab is the discontinuity that develops following punching shear. A numerical simulation technique is proposed here to model and evaluate post-punching resistance of flat slabs. It is demonstrated that the simulation results of punching shear and post-punching response of the model of a slab on a single column are in good agreement with corresponding experimental data. It is also shown that progressive collapse due to a column removal (explosion) can lead to punching failure over an adjacent column. Such failure can propagate throughout the structure leading to the progressive collapse of the structure. Through post-punching modeling of the slab and accounting for the associated discontinuity, it is also demonstrated that the presence of an adequate amount of integrity reinforcement can provide an alternative load path and help resist progressive collapse.

키워드

참고문헌

  1. Abaqus INC (2010), Standard User's Manual, 6.9 Edition.
  2. ACI 318 (2011), Building Code Requirements for Structural Concrete, ACI 318-11, American Concrete Institute, Committee 318, USA.
  3. ACI 349 (2001), Code Requirements for Nuclear Safety Related Concrete Structures, ACI 349-01, American Concrete Institute, USA.
  4. ACI 352.1R-11 (2011), Guide for Design of Slab-Column Connections in Monolithic Concrete Structures, ACI Committee 352, American Concrete Institute, USA.
  5. Joint ACI-ASCE Committee 426 (1974), Shear strength of reinforced concrete members-slabs, Proceedings of ASCE, 100 (ST8).
  6. ASCE 7 (2010), Minimum Design Loads for Buildings and Other Structures, ASCE, SEI/ASCE-7, USA
  7. Bao, Y., Kunnath, S.K., El-Tawil, S.H. and Lew, H.S. (2008), "Macromodel-based simulation of progressive collapse: RC frame structures", J. Struct. Eng., 134(7), 1079-1091. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:7(1079)
  8. Carino, N.J., Woodward, K.A., Leyendecker, E.V. and Fattal S.G. (1983), "A review of the Skyline Plaza collapse", Concr. Int., 5(7), 35-42.
  9. Corley, W.G. (2004), "Lesson learned on improving resistance of buildings to terrorist attacks", J. Perform. Construct. Facil., ASCE, 18(2), 68-78. https://doi.org/10.1061/(ASCE)0887-3828(2004)18:2(68)
  10. DOD (2010), Unified Facilities Criteria, Design of Buildings to Resist Progressive Collapse, US Department of Defense, Washington DC, USA.
  11. Ellingwood, B., Smilowitz, R., Dusenberry, D., Duthinh, D. and Carino, J.N. (2007), BestPractices for Reducing the Potential for Progressive Collapse in Buildings, National Institute of Standards and Technology, Technology Administration, U.S. Department of Commerce, USA.
  12. Fib (2001), Punching of Structural Concrete Slabs, fib bulletin 12, Federation Internationale du Beton, Lausanne, Switzerland.
  13. GSA (2003), Progressive Collapse Analysis and Design Guidelines for New Federal Office Buildings and Major Modernization Projects, General Services Administration, USA.
  14. Guandalini, S. (2005), Poinconnement Symetrique des Dalles en Beton Arme, These de doctorat, N. 3380, Lausanne, Switzerland.
  15. Guandalini, S., Burdet, O, and Muttoni, A. (2009), "Punching tests of slabs with low reinforcement ratios", ACI Struct. J., 106(1), 87-95.
  16. Hewitt, B.E. and Batchelor, B. (1975), "A punching shear strength of restrained slabs", J. Struct. Div., ASCE, 101(9), 1837-1853.
  17. Jelic, I., Pavlovic, M.N., Kotsovos, M.D. (1999), "A study of dowel action in reinforced concrete beams", Mag. Concr. Res., 2(2), 131-141.
  18. Kaminetzky, D. (1991), Design and Construction Failures Lessons from Forensic Investigations, McGraw-Hill, USA.
  19. King, S. and Delatte, N.J. (2004), "Collapse of 2000 commonwealth avenue: punching shear case study", Perform. Construct. Facil. ASCE, 18(1), 54-61. https://doi.org/10.1061/(ASCE)0887-3828(2004)18:1(54)
  20. Kinnunen, S. and Nylander, H. (1960), Punching of Concrete Slabs Without Shear Reinforcement, Transactions of the Royal Institute of Technology, No. 158, Stockholm, Sweden.
  21. Knoll, F. and Vogel, T. (2009), Design for Robustness, Structural Engineering Documents 11, IABSE-AIPC-IVBH, Switzerland.
  22. Long, A.E. (1975), "A two-phase approach to the prediction of the punching strength of slabs", ACI Struct. J., 72(2), 37-45.
  23. Masoero, E., Wittel, F.K., Herrmann, H.J. and Chiaia, B.M. (2010), "Progressive collapse mechanisms of brittle and ductile framed structures", J. Eng. Mech., ASCE, 136(8), 987-995. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000143
  24. Melo, G.S. and Regan, P.E. (1998), "Post-punching resistance of connections between flat slabs and interior columns", Mag. Conc. Res., 50(4), 319-327. https://doi.org/10.1680/macr.1998.50.4.319
  25. Mirzaei, Y. (2010), Post-Punching Behavior of Reinforced Concrete Slabs, EPFL Thesis No. 4613, Lausanne, Switzerland.
  26. Mullers, I. (2007), "Zur Robustheit im Hochbau: Stutzenausfall als Gefahrdungsbild fur Stahlbetontrag-werke", Ph.D. Thesis, ETH, Zurich, Switzerland.
  27. Mirzaei, Y. and Muttoni, A. (2008), Tests of the Post-Punching Behavior of the Reinforced Concrete Flat Slabs, IS-BETON, Lausanne, Switzerland.
  28. Mitchell, D. and Cook, W.D. (1984), "Preventing progressive collapse of slab structures", J. Struct. Eng., ASCE, 110(7), 1513-1532. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:7(1513)
  29. Muttoni, A. (2008), "Punching shear strength of reinforced concrete slabs without transverse reinforcement", ACI Struct. J., 105(4), 440-450.
  30. Muttoni, A. and Fernandez, R.M. (2008), "Shear strength of members without transverse reinforcement as function of critical shear crack width", ACI Struct. J., 105(2), 163-172.
  31. Park, R. (1964), "Tensile membrane behavior of uniformly loaded rectangular reinforced concrete slabs with fully restrained edges", Mag. Conc. Res., 16(40), 39-44. https://doi.org/10.1680/macr.1964.16.46.39
  32. Sasani, M., Bazan, M. and Sagiroglu, S. (2007), "Experimental and analytical progressive collapse evaluation of actual reinforced concrete structure", ACI Struct. J., 104(6), 731-739.
  33. Sasani, M. and Sagiroglu, S. (2008), "Progressive collapse of reinforced concrete structures: a multihazard perspective", ACI Struct. J., 105(1), 96-103.
  34. Schousboe, I. (1976), "Bailey's crossroads collapse reviewed", J. Construct. Div., ASCE, 102(CO2), 365-378.
  35. Sozen, M.A., Corley, W.G., Mlakar, P.F. and Thornton, C.H. (1998), "The Oklahoma city bombing: structural details and possible mechanisms for the Murrah building", J. Perform. Construct. Facil. , 12(3), 120-136. https://doi.org/10.1061/(ASCE)0887-3828(1998)12:3(120)
  36. Theodorakopoulosa, D.D. and Swamy, R.N. (2002), "Ultimate punching shear strength analysis of slab-column connections", Cement Concrete Compos., Special Theme Issue, 24(6), 509-521. https://doi.org/10.1016/S0958-9465(01)00067-1
  37. Valipour, H.R. and Foster, S.J. (2010), "Nonlinear analysis of 3D reinforced concrete frames: effect of section torsion on global response", Struct. Eng. Mech., 36(4), 421-445. https://doi.org/10.12989/sem.2010.36.4.421
  38. Weerheijm, J., Mediavilla, J. and Van Doormaal, J.C.A.M. (2009), "Explosive loading of multi-story RC buildings: Dynamic response and progressive collapse", Struct. Eng. Mech., 32(2), 193-212. https://doi.org/10.12989/sem.2009.32.2.193
  39. Yuan W.F. and Tan K.H. (2011), "Modeling of progressive collapse of a multi-story structure using a spring-mass-damper system", Struct. Eng. Mech., 37(1), 79-93. https://doi.org/10.12989/sem.2011.37.1.079

피인용 문헌

  1. Theoretical investigations on load-bearing capacity of RC flat-plate framed structures subject to middle column loss 2017, https://doi.org/10.1002/tal.1458
  2. Experimental investigation on the dynamic response of RC flat slabs after a sudden column loss vol.99, 2015, https://doi.org/10.1016/j.engstruct.2015.04.040
  3. Nonlinear behaviour of reinforced concrete flat slabs after a column loss event vol.21, pp.14, 2018, https://doi.org/10.1177/1369433218768968
  4. Simulations of short- and long-term deflections of flat plates considering effects of construction sequences vol.62, pp.4, 2013, https://doi.org/10.12989/sem.2017.62.4.477
  5. Unified equivalent frame method for post-tensioned flat plate slab structures vol.20, pp.6, 2013, https://doi.org/10.12989/cac.2017.20.6.663
  6. Numerical study on effect of integrity reinforcement on punching shear of flat plate vol.20, pp.6, 2013, https://doi.org/10.12989/cac.2017.20.6.731
  7. Comparative and Parametric Studies on Behavior of RC-Flat Plates Subjected to Interior-Column Loss vol.146, pp.9, 2013, https://doi.org/10.1061/(asce)st.1943-541x.0002757
  8. Simulation of punching and post-punching shear behaviours of RC slab-column connections vol.73, pp.22, 2013, https://doi.org/10.1680/jmacr.19.00465