DOI QR코드

DOI QR Code

A new block assembly method for shipbuilding at sea

  • Zhang, Bilin (Hyundai Heavy Industries (Shanghai) R & D Co., Ltd.) ;
  • Boo, Seung-Hwan (Division of Ocean Systems Engineering, Korea Advanced Institute of Science and Technology) ;
  • Kim, Jin-Gyun (Department of System Reliability, Korea Institute of Machinery and Materials)
  • 투고 : 2015.03.10
  • 심사 : 2015.04.27
  • 발행 : 2015.06.10

초록

In this paper, we introduce a new method for assembly of shipbuilding blocks at sea and present its feasibility focusing on structural safety. The core concept of this method is to assemble ship building blocks by use of bolting, gluing and welding techniques at sea without dock facilities. Due to its independence of dock facilities, shipyard construction capability could be increased considerably by the proposed method. To show the structural safety of this method, a bulk carrier and an oil tanker were employed, and we investigated the structural behavior of those ships to which the new block assembly method was applied. The ship hull models attached with connective parts are analyzed in detail through finite element analyses, and the cargo capacity of the bulk carrier is briefly discussed as well. The results of these studies show the potential for applying this new block assembly method to practical shipbuilding.

키워드

과제정보

연구 과제 주관 기관 : Korea Institute of Energy Technology Evaluation and Planning (KETEP), National Research Foundation of Korea (NRF)

참고문헌

  1. Amlashi, H.K.K. and Moan, T. (2008), "Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition - a case study", Marine Struct., 21, 327-352. https://doi.org/10.1016/j.marstruc.2007.12.006
  2. Assakkaf, I.A. (2003), "Beams: composite beams; stress concentrations", Ph.D. Dissertation, University of Maryland, Washington.
  3. Dvorkin, E.N. and Bathe, K.J. (1984), "A continuum mechanics based four-node shell element for general non-linear analysis", Engineering Computations, 1(1), 77-88. https://doi.org/10.1108/eb023562
  4. Eyres, D.J. (2007), Ship Construction, Elsevier, Oxford, England.
  5. Fearnleys (2014), Fearnleys Weekly Report, Date: 11 June 2014, Fearnresearch.
  6. Inozu, B., Niccolai, M.J., Whitcomb, C.A., MacClaren, B., Radovic, I. and Bourg, D. (2006), "New horizons for shipbuilding process improvement", J. Ship Product., 22(2), 87-98.
  7. International Association of Classification Societies (2006), Common structural rules, International Association of Classification Societies.
  8. Kim, H., Lee, S.S., Park, J.H. and Lee, J.G. (2005), "A model for a simulation-based shipbuilding system in a shipyard manufacturing process", Int. J. Comput. Integrat. Manuf., 18(6), 427-441. https://doi.org/10.1080/09511920500064789
  9. Kim, J.H., Park, J.S., Lee, K.H., Kim, J.H., Kim, M.H. and Lee, J.M., (2014), "Computational analysis and design formula development for the design of curved plates for ships and offshore structures", Struct. Eng. Mech., 49(6), 705-726. https://doi.org/10.12989/sem.2014.49.6.705
  10. Kim, J.G., Cho, S.P., Kim, K.T. and Lee, P.S., (2014), "Hydroelastic design contour for the preliminary design of very large floating structures", Ocean Eng., 78, 112-123. https://doi.org/10.1016/j.oceaneng.2013.11.006
  11. Kim, K.T., Lee, P.S. and Park, K.C., (2014), "A direct coupling method for 3D hydroelastic analysis of floating structures", Int. J. Numer. Meth. Eng., 96(13), 842-866. https://doi.org/10.1002/nme.4564
  12. Lee, P.S., Noh, H.C. and Choi, C.K., (2008), "Geometry-dependent MITC method for a 2-node iso-beam element", Struct. Eng. Mech., 29(2), 203-221. https://doi.org/10.12989/sem.2008.29.2.203
  13. Lee, P.S. et al. (2011), "Method for Constructing ahip on the aea, and connecting block used therein", Korea Patent 1020110129216, Korea Institute of Patent Information, Daejeon.
  14. Lee, P.Y. et al. (2003), "Ship construction method and dam for the method", Korea Patent 1,020,030,067,890, Hanjin Heavy Industry, Pusan.
  15. Lee, Y., Lee, P.S. and Bathe, K.J., (2014), "The MITC3+ shell finite element and its performance", Comput. Struct., 138, 12-23. https://doi.org/10.1016/j.compstruc.2014.02.005
  16. Liu, Z.S., Swaddiwudhipond, S., Lu, C. and Hua, J., (2005), "Transient energy flow in ship plate and shell structures under low velocity impact", Struct. Eng. Mech., 20(4), 451-463. https://doi.org/10.12989/sem.2005.20.4.451
  17. Paik, J.K., Thayamballi, A.K., Pedersen, P.T. and Park, Y.I. (2001), "Ultimate strength of ship hulls under torsion", Ocean Eng., 28(8), 1097-1133. https://doi.org/10.1016/S0029-8018(01)00015-4
  18. Read, J., Stenseng, A., Hulla, R. and Poulin, D. (2000), "Millennium class tanker structural design - From owner experience to shipyard launching ways", Ship Structure Symposium Meeting 2000, Washington, D.C., United States.
  19. Servis, D., Voudouris, G., Samuelides, M. and Papanikolaou, A. (2003), "Finite element modelling and strength analysis of hold No. 1 of bulk carriers", Marine Struct., 16, 601-626. https://doi.org/10.1016/j.marstruc.2004.01.002
  20. Washington State Department of Transportation (2013), SR 520 bridge replacement and HOV program, Washington State Department of Transportation.