References
- J. -H. Lee, S. -H. Um and R. -H. Kim, "Reform Method for Installation Criterion of Pressure Safety Valve Discharge Pipe for LPG", Journal of the Korea Institute of Gas, Vol. 16, No. 4, pp. 59-64. 2012. https://doi.org/10.7842/kigas.2012.16.4.59
- L. -S. Lee and Y. -S. Lee, "A Study on the Proability of BLEVE of Above-ground LPG Storage Tanks Exposed to External Fire", Journal of the Korea Institute of Gas, Vol. 7, No. 1, pp. 19-23. 2003.
- J. -G. Yoon, "The Study for Cause of Boo-choon LPG Station Accident", Journal of the Korean Institute Industry of Safety, Vol. 16, No. 3, pp. 31-34. 2001.
- KOSHA Guide D-18, "Technical Guideline for Design and Installation of Safety Valve", KOSHA, pp. 7-10, 2012.
- API STD 521, "Pressure-relieving and Depressuring Systems", API, pp. 36-223. 2014.
- KOSHA Guide D-26, "Technical Guideline for Pocess Safety Valve", KOSHA, pp. 1-32. 2012.
- Gabriele Landucci, Menso Molag & Valerio Cozzani, "Modeling the Performance of Coated LPG Tanks Engulfed in Fires", Journal of Hazardous Material, Vol. 172, pp. 447-456. 2009. https://doi.org/10.1016/j.jhazmat.2009.07.029
- C. -W. Son, "The Way to Shorten Response Time for Fire Damage Reduction", DAEGU's Administrative Hard Study, Vol. 22, pp. 979-994. 2010.
- Edward Zamejc, "API Standard 521 New Alternative Method to Evaluate Fire Relief for Pressure Relief Device Sizing and Depressuring System Design", Journal of Loss Prevention in the Process Industries, Vol. 27, pp. 21-31. 2014. https://doi.org/10.1016/j.jlp.2013.10.016
- A.M. Birk, D. Poirier and C. Davison "On the Response of 500 Gal Propane Tanks to a 25% Engulfing Fire", Journal of Loss Prevention in the Process Industries, Vol. 19, pp. 527-541, 2006. https://doi.org/10.1016/j.jlp.2005.12.008
- F. Heymes, L. Aprin, A.M. Birk, P. Slangen, J.B. Jarry, H. Francois and G. Dusserre, "An Experimental Study of an LPG Tank at Low Filling Level Heated by a Remote Wall Fire", Journal of Loss Prevention in the Process Industries, Vol. 26, pp. 1484-1491. 2013. https://doi.org/10.1016/j.jlp.2013.09.015
- R. R. Scott, "Users Manual for AFFTAC 4.00 Beta 06", The Railway Progress Institute and the Association of American Railroads, pp. 11-159. 2013.
- T. A. Rpberts, I. Buckland, L.C Shirvill, B. J. Lowesmith and P. Salater, "Design and Protection of Pressure Systems to Withstand Severe Fires", Process Safety and Environment Protection, Vol. 82, pp. 89-96, 2004. https://doi.org/10.1205/095758204322972735
- KOSHA Guide P-107, "Guideline for Selection of the Worst Leak Scenario", KOSHA, pp. 1-14. 2012.
- KOSHA Guide P-110, "Technical Guideline for Damage Minimization Measure of Chemical Factory", KOSHA, pp. 1-22. 2012.
- KOSHA Guide P-102, "Technical Guideline for Consequence Analysis", KOSHA, pp. 12-14. 2012.
Cited by
- Review of Safety for Pressure-Relieving Systems of Small to Middle Scale Chemical Plants vol.30, pp.6, 2015, https://doi.org/10.14346/JKOSOS.2015.30.6.48