DOI QR코드

DOI QR Code

A Study on Applicability of Tensile Constitutive Model of Steel Fiber Reinforced Concrete in Model Code 2010

Model Code 2010에 제시된 강섬유 보강 콘크리트의 인장 구성모델 적용성 고찰

  • Yeo, Dong-Jin (Department of Civil Engineering, Kyung-Sung Univ) ;
  • Kang, Duk-Man (Graduate School of Railway, Seoul National University of Science & Technology) ;
  • Lee, Myung-Seok (Graduate School of Railway, Seoul National University of Science & Technology) ;
  • Moon, Do-Young (Department of Civil Engineering, Kyung-Sung Univ)
  • 여동진 (경성대학교 토목공학과) ;
  • 강덕만 (서울과학기술대학교 철도전문대학원) ;
  • 이명석 (서울과학기술대학교 철도전문대학원) ;
  • 문도영 (경성대학교 토목공학과)
  • Received : 2016.04.22
  • Accepted : 2016.08.23
  • Published : 2016.10.30

Abstract

Tensile constitutive stress-strain model of steel fiber reinforced concrete (SFRC) in fib MC2010 was investigated. In order to model tensile behavior of SFRC, three point loading flexural tests were conducted on notched small beams according to BE-EN-14651. Design parameters for the constitutive model were determined from the flexural tests. Flexural test and finite element analysis were conducted on large SFRC beam without steel reinforcements and compared with each other. In addition, parametric study on the effect of compressive and tensile model, and characteristic length on flexural behavior of the SFRC beam was conducted also. In results, pre-peak load-displacement curves from the FE analysis was close to experimental curves but significant difference was shown in post-peak behavior. The reason of the difference is originated from the fact that the fiber distribution and orientation were not being properly considered in the MC2010 model. This study shows that modification and detail explanations on the orientation factor K in MC2010 might require to better reproduce the behaviour of large scale SFRC beams.

본 연구에서는 Model Code 2010에 제시된 강섬유 보강 콘크리트(SFRC)의 인장구성모델에 대하여 고찰하였다. SFRC의 인장 거동을 모델링하기 위하여 BS-EN-14651에 따라 노치를 갖는 작은 보의 3점재하 휨실험을 수행하였다. 이 실험결과를 토대로 인장구성모델의 다양한 설계인자를 결정하였다. 이형철근이 보강되지 않은 길이 3 m의 보의 휨파괴 실험과 유한요소해석을 수행하고 상호 비교하였다. 추가적으로 인장구성모델의 주요변수인 압축 및 인장모델과 특성길이가 보의 거동에 미치는 영향에 대한 변수해석을 수행하였다. 결과에서, 최대치 이전의 거동에서는 해석과 실험결과로부터 얻은 하중-변위곡선이 매우 유사하지만 최대치 이후에서는 중대한 차이가 있음을 확인하였다. 이는 MC2010의 인장구성모델이 섬유의 분포와 방향을 적절히 고려하지 못하기 때문이다. 본 연구는 철근이 보강되지 않은 실규모의 SFRC 보의 거동을 적절하게 모사하기 위해서는 MC2010에서 규정하고 있는 섬유방향 계수 K에 대한 수정 또는 상세한 설명이 필요하다는 것을 보여주고 있다.

Keywords

References

  1. Job Thomas., and Ananth Ramaswamy., "Mechanical Properties of Steel Fiber-reinforced Concrete", Journal of Materials in Civil Engineering, Vol.19, No.5, 2007, pp.385-392. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:5(385)
  2. Dipti Ranjan Sahoo., and Nitin Kumar., "Monotonic Behavior Of Large-Scale Sfrc Beams Without Stirrups", Engineering Structures, Vol.92, 2015, pp.46-54. https://doi.org/10.1016/j.engstruct.2015.03.014
  3. Giuseppe Tiberti., Fausto Minelli., and Giovanni Plizzari., "Cracking Behavior in Reinforced Concrete Members with Steel Fibers: A Comprehensive Experimental Study", Cement and Concrete Research, Vol.68, 2015, pp.24-34. https://doi.org/10.1016/j.cemconres.2014.10.011
  4. Ali Amin., Stephen J Foster., and Aurelio Muttoni., "Evaluation of the Tensile Strength of SFRC as Derived from Inverse Analysis of Notched Bending Tests", VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS-8, EPFL-CONF-188093, 2013.
  5. Halit Cenan Mertol., Eray Baran., Hussain Jibril and Bello., "Flexural Behavior Of Lightly And Heavily Reinforced Steel Fiber Concrete Beams", Construction and Building Materials, Vol.98, 2015, pp.185-193. https://doi.org/10.1016/j.conbuildmat.2015.08.032
  6. Zhiguo You., Xiangyu Chen., and Shuai Dong., "Ductility and Strength of Hybrid Fiber Reinforced Self-Consolidating Concrete Beam with Low Reinforcement Ratios", Systems Engineering Procedia, Vol.1, 2011, pp.28-34. https://doi.org/10.1016/j.sepro.2011.08.006
  7. Marco Di Prisco., Giovanni Plizzari., and Lucie Vandewalle., "Fibre Reinforced Concrete: New Design Perspectives", Materials and Structures, Vol.42, No.9, 2009, pp.1261-1281. https://doi.org/10.1617/s11527-009-9529-4
  8. Marco di Prisco., Matteo Colombo., and Daniele Dozio., "Fibre‐reinforced Concrete in fib Model Code 2010: Principles, Models and Test Validation", Structural Concrete, Vol.14, No.4, 2013, pp.342-361. https://doi.org/10.1002/suco.201300021
  9. ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary, American Concrete Institute, Farmington Hills, Mich., 2011, pp.470.
  10. fib Model Code. 2010. Model Code 2010-Final Draft, Federation Internationale du Beton, Vol.1, PP.150.
  11. Moon, D. Y., Chang, S. H., Bae, G. J., Lee, G. P., and Kim, H. S., "Tensile Strength Evaluation of Sfrc Subjected to High Temperature Using Double Punch Test", Journal of Korean Tunnelling and Underground Space Association, 2013.
  12. Lee, S. H., Kim, S. H., Bae, G. J., and Chung, H. S., "A Study on Propriety Steel Fiber Contents of Steel Fiber Shotcrete at Tunnel Construction", Journal of the Korean Society of Civil Engineers, 2006, pp.4262-4265.
  13. Lee, S. C., Oh, J. H., and Cho, J. Y., "Compressive Behavior of Fiber-Reinforced Concrete with End-Hooked Steel Fibers", Materials, Vol.8, No.4, 2015, pp.1442-1458. https://doi.org/10.3390/ma8041442
  14. Oguz Akin Duzgun., Rustem Gul., and Abdulkadir Cuneyt Aydin., "Effect of Steel Fibers on the Mechanical Properties of Natural Lightweight Aggregate Concrete", Materials Letters, Vol.59, No.27, 2005, pp.3357-3363. https://doi.org/10.1016/j.matlet.2005.05.071
  15. Amir Hossein Jodeiri., and Ronaldo J Quitalig., "Effect of Wirand FS7-II Steel Wire Fibre on Flexural Capacity of Reinforced Concrete Beam", Journal of Civil Engineering Research, Vol.2, No.6, 2012, pp.100-107. https://doi.org/10.5923/j.jce.20120206.06
  16. Moradi, M., Valipour, H., Foster, S. J., and Bradford, M. A., "Deconstructable Steel-fibre Reinforced Concrete Deck Slabs with a Transverse Confining System", Materials & Design, Vol.89, 2016, pp.1007-1019. https://doi.org/10.1016/j.matdes.2015.10.059
  17. Bibiana Luccioni., Gonzalo Ruano., Facundo Isla., Raul Zerbino., and Graciela Giaccio., "A Simple Approach to Model SFRC", Construction and Building Materials, Vol.37, 2012, pp.111-124. https://doi.org/10.1016/j.conbuildmat.2012.07.027
  18. Amin Abrishambaf., Vitor MCF Cunha., and Joaquim AO Barros., "The Influence of Fibre Orientation on the Post-Cracking Tensile Behaviour of Steel Fibre Reinforced Self-Compacting Concrete", Gruppo Italiano Frattura, Vol.31, 2015, pp.38-53.
  19. Lee, S. C., Oh, J. H., and Cho, J.Y., "Fiber Orientation Factor on Rectangular Cross-section in Concrete Members", International Journal of Engineering and Technology, Vol.7, No.6, 2015, pp.470. https://doi.org/10.7763/IJET.2015.V7.839
  20. M di Prisco., L Ferrara., and A Caverzan., "Self-compacting Fibre Reinforced Concrete: Is The Material Really Isotropic?", Universidad Politecnica de Madrid, Vol.3, 2010, pp.17-31.
  21. A Blanco., P Pujadas., A de la Fuente., SHP Cavalaro., and A Aguado., "Assessment of the Fibre Orientation Factor in SFRC Slabs", Composites Part B: Engineering, Vol.68, 2015, pp.343-354. https://doi.org/10.1016/j.compositesb.2014.09.001