Membrane Journal (멤브레인)

The Membrane Society of Korea (한국막학회)
권호 표지
DOI QR코드

DOI QR Code

Development Trend of Composite Materials for Membrane Hosuing

분리막 하우징용 복합소재의 연구개발 동향

  • Kim, Deuk Ju (Department of Materials Engineering and Convergence Technology, Engineering Research Institute, Gyeongsang National University) ;
  • Nam, Sang Yong (Department of Materials Engineering and Convergence Technology, Engineering Research Institute, Gyeongsang National University)
  • 김득주 (경상대학교 나노.신소재융합공학과, 공학연구원) ;
  • 남상용 (경상대학교 나노.신소재융합공학과, 공학연구원)
  • Received : 2016.02.25
  • Accepted : 2016.02.27
  • Published : 2016.02.29
Download PDF
⟨ Previous Next ⟩

Abstract

The membrane separation process is growing very fast because of the high efficiency and low cost compared with other traditional process. The membrane process consists of various components such as membrane, module and mechanical part. The requirements for materials used in the membrane separation are becoming more and more demanding for achievement of high efficiency. Membrane module is also considered as the one of the key component in the membrane system. Recently composite materials have been considered as the membrane housing due to their excellent property and low cost compared with stainless module. In this review, a various types of glass fiber and composite material are summarized and their potential for the application of membrane system is discussed.

분리막 시스템은 기존의 분리공정과 비교하여 우수한 효율과 낮은 가격으로 인하여 빠르게 성장하고 있다. 분리막 공정은 분리막, 모듈, 그리고 기계적 요소로 구성되어 있으며 향상된 효율을 얻기 위하여 분리막 공정에 사용되는 소재의 요구사항 또한 증가가 되고 있다. 분리막 모듈은 분리막 시스템의 핵심 요소 중 하나로써 최근 들어 복합 소재들이 스테인레스강 모듈과 비교하여 우수한 물성과 낮은 가격으로 인해 분리막 하우징에 적용되어 왔다. 본 리뷰에서는 다양한 종류의 유리섬유와 이를 이용한 복합소재들에 대하여 정리하였으며 분리막 시스템에 적용을 위한 잠재성에 대하여 논의하였다.

Keywords

References

  1. Y. S. Jeon and J. W. Rhim, "Composite membrane preparation for low pressure using salting-out method and its", Membr. J., 25, 440 (2015). https://doi.org/10.14579/MEMBRANE_JOURNAL.2015.25.5.440
  2. S. Kwon and Y. T. Lee, "Improvement of fouling resistance with reverse osmosis membrane using multi-layer silane-epoxy surface modification", Membr. J., 25, 332 (2015). https://doi.org/10.14579/MEMBRANE_JOURNAL.2015.25.4.332
  3. K. M. Kyung and J. Y. Park, "Effect of pH in hybrid water treatment process of PVdF nanofibers spiral wound microfiltration and granular activated carbon", Membr. J., 25, 358 (2015). https://doi.org/10.14579/MEMBRANE_JOURNAL.2015.25.4.358
  4. P. K. Tewari, "Nanocomposite membrane technology: Fundamentals and applications", pp. 49, CRC Press, Boca Raton, FL (2015).
  5. T. Varzakas and C. Tzia, "Food engineering handbook: Food engineering fundamentals", CRC Press, Boca Raton, FL (2014).
  6. A. Basile, A. Cassano, and N. K. Rastogi, "Advances in membrane technologies for water treatment: Materials, processes and applications", pp. 61, Woodhead Publishing (Elsevier), Amsterdam, Netherlands (2015).
  7. L. W. McKeen, "Permeability properties of plastics and elastomers, third edition (Plastics Design Library) 3rd edition", Elsevier, Amsterdam, Netherlands (2011).
  8. A. F. Ismail and S. N. Kumari, "Potential effect of potting resin on the performance of hollow fibre membrane modules in a CO2/CH4 gas separation system", J. Membr. Sci., 236, 183 (2004). https://doi.org/10.1016/j.memsci.2004.02.023
  9. H. Guan, F. Yang, and Q. Wang, "Study on evaluation index system of rubber materials for sealing", Mater. Design, 32, 2404 (2011). https://doi.org/10.1016/j.matdes.2010.12.030
  10. http://www.toraywater.com/products/parts/o_ring/index. html Feburary 10 (2015).
  11. J. Holbery and D. Houston, "Natural-fiber-reinforced polymer composites in automotive applications", Jom, 58, 80 (2006).
  12. H. El Kadi, "Modeling the mechanical behavior of fiber-reinforced polymeric composite materials using artificial neural networks-review", Compos. Struct., 73, 1 (2006). https://doi.org/10.1016/j.compstruct.2005.01.020
  13. E. Barjasteh, E. J. Bosze, Y. I. Tsai, and S. R. Nutt, "Thermal aging of fiberglass/carbon-fiber hybrid composites", Compos. Pt. A-Appl. Sci. Manuf., 40, 2038 (2009). https://doi.org/10.1016/j.compositesa.2009.09.015
  14. E. C. Botelho, R. A. Silva, L. C. Pardini, and M. C. Rezende, "A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures", Materials Research, 9, 247 (2006). https://doi.org/10.1590/S1516-14392006000300002
  15. J. Zhu, A. Imam, R. Crane, K. Lozano, V. N. Khabashesku, and E. V. Barrera, "Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength", Compos. Sci. and Technol., 67, 1509 (2007). https://doi.org/10.1016/j.compscitech.2006.07.018
  16. K. Palanikumar, L. Karunamoorthy, and R. Karthikeyan, "Assessment of factors influencing surface roughness on the machining of glass fiber-reinforced polymer composites", Mater. Design, 27, 862 (2006). https://doi.org/10.1016/j.matdes.2005.03.011
  17. A. Salehi-Khojin, R. Bashirzadeh, M. Mahinfalah, and R. Nakhaei-Jazar, "The role of temperature on impact properties of Kevlar/fiberglass composite laminates", Compos. Pt. B-Eng., 37, 593 (2006). https://doi.org/10.1016/j.compositesb.2006.03.009
  18. P. K. Mallick, "Fiber-reinforced composites: Materials, manufacturing, and design, third edition (Mechanical Engineering)" pp. 32, CRC Press, Boca Raton, FL (2007).
  19. P. K. Mallick, "Fiber-reinforced composites: materials, manufacturing, and design", pp. 34, CRC press, CRC Press, Boca Raton, FL (2007).
  20. http://www.massey.ac.nz/-ychisti/MHandbook.pdf.
  21. A. Cavdar, "A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites", Compos. Pt. B-Eng., 43, 2452 (2012). https://doi.org/10.1016/j.compositesb.2011.10.005
  22. M. J. Jweeg, A. P. D. A. S. Hammood, and M. Al-Waily, "Experimental and theoretical studies of mechanical properties for reinforcement fiber types of composite materials", International Journal of Mechanical & Mechatronics Engineering IJMMEIJENS, 12, 62 (2012).
  23. D. Gay, "Composite materials: design and applications", CRC Press, Boca Raton, FL (2014).
  24. A. Shakeri and M. Raghimi, "Studies on mechanical performance and water absorption of recycled newspaper/glass fiber reinforced polypropylene hybrid composites", J. Reinf. Plast. Comp., 00, 1 (2009).
  25. A. Pusz, M. Szymiczek, and K. Michalik, "Ageing process influence on mechanical properties of polyamide-glass composites applied in dentistry", Journal of Achievements in materials and manufacturing engineering, 38, 49 (2009).
  26. T. P. Sathishkumar, J. Naveen, and S. Satheeshkumar, "Characterization of natural fiber and composites - a review", J. Reinf. Plast. Comp., 32, 1446 (2013).
  27. S. Mishra, A. K. Mohanty, L. T. Drzal, M. Misra, S. Parija, S. K. Nayak, and S. S. Tripathy, "Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites", Compos. Sci. Technol., 63, 1377 (2003). https://doi.org/10.1016/S0266-3538(03)00084-8
  28. P. N. Khanam, M. M. Reddy, K. Raghu, K. John, and S. V. Naidu, "Tensile, flexural and compressive properties of sisal/silk hybrid composites", J. Reinf. Plast. Comp., 26, 1065 (2007). https://doi.org/10.1177/0731684407079347
  29. M. A. A. Ghani, Z. Salleh, K. M. Hyie, M. N. Berhan, Y. M. D. Taib, and M. A. I. Bakri, "Mechanical properties of kenaf/fiberglass polyester hybrid composite", Procedia Engineering, 41, 1654 (2012). https://doi.org/10.1016/j.proeng.2012.07.364
  30. K. S. Ahmed, S. Vijayarangan, and A. Kumar, "Low Velocity Impact Damage Characterization of Woven Jute-glass Fabric Reinforced Isothalic Polyester Hybrid Composites", J. Reinf. Plast. Comp., 26, 959 (2007). https://doi.org/10.1177/0731684407079414
  31. M. Thiruchitrambalam, A. Alavudeen, A. Athijayamani, N. Venkateshwaran, and A. E. Perumal, "Improving mechanical properties of banana/kenaf polyester hybrid composites using sodium laulryl sulfate treatment", Mater. Phys. Mech., 8, 165 (2009).
  32. M. Idicula, S. K. Malhotra, K. Joseph, and S. Thomas, "Dynamic mechanical analysis of randomly oriented intimately mixed short banana/sisal hybrid fibre reinforced polyester composites", Compos. Sci. Technol., 65, 1077 (2005). https://doi.org/10.1016/j.compscitech.2004.10.023
  33. R. Velmurugan and V. Manikandan, "Mechanical properties of glass/palmyra fiber waste sandwich composites" Indian. J. Eng. Mater. S., 12, 563 (2005).
  34. K. S. Ahmed and S. Vijayaragan, "Elastic property evaluation of jute-glass fibre hybrid composite using experimental and CLT approach", Indian. J.Eng. Mater. S., 13, 435 (2006).
  35. A. Athijayamani, M. Thiruchitrambalam, U. Natarajan, and B. Pazhanivel, "Effect of moisture absorption on the mechanical properties of randomly oriented natural fibers/polyester hybrid composite", Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 517, 344 (2009). https://doi.org/10.1016/j.msea.2009.04.027
  36. K. Raghu, P. N. Khanam, and S. V. Naidu,"Chemical resistance studies of silk/sisal fiber-reinforced unsaturated polyester-based hybrid composites", J. Reinf. Plast. Comp., 0, 1 (2008).
  37. N. Venkateshwaran, A. ElayaPerumal, A. Alavudeen, and M. Thiruchitrambalam, "Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites", Mater. Design, 32, 4017 (2011). https://doi.org/10.1016/j.matdes.2011.03.002
  38. A. I. Selmy, A. R. Elsesi, N. A. Azab, and M. A. A. El-baky, "Monotonic properties of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid composites", Mater. Design, 32, 743 (2011). https://doi.org/10.1016/j.matdes.2010.07.031
  39. M. Sayer, N. B. Bektas, E. Demir, and H. Callioglu, "The effect of temperatures on hybrid composite laminates under impact loading", Compos. Pt. B-Eng., 43, 2152 (2012). https://doi.org/10.1016/j.compositesb.2012.02.037
  40. M. Jawaid, H. P. S. A. Khalil, A. A. Bakar, and P. N. Khanam, "Chemical resistance, void content and tensile properties of oil palm/jute fibre reinforced polymer hybrid composites", Mater. Design, 32, 1014 (2011). https://doi.org/10.1016/j.matdes.2010.07.033
  41. M. Zhan, R. P. Wool, and J. Q. Xiao, "Electrical properties of chicken feather fiber reinforced epoxy composites", Compos. Pt. A-Appl. Sci. Manuf., 42, 229 (2011). https://doi.org/10.1016/j.compositesa.2010.11.007
  42. T. Czigany, "Special manufacturing and characteristics of basalt fiber reinforced hybrid polypropylene composites: mechanical properties and acoustic emission study", Compos. Sci. Technol., 66, 3210 (2006). https://doi.org/10.1016/j.compscitech.2005.07.007
  43. P. Wambua, B. Vangrimde, S. Lomov, and I. Verpoest, "The response of natural fibre composites to ballistic impact by fragment simulating projectiles", Compos. Struct., 77, 232 (2007). https://doi.org/10.1016/j.compstruct.2005.07.006
  44. M. M. Thwe and K. Liao, "Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites", Compos. Sci. Technol., 63, 375 (2003). https://doi.org/10.1016/S0266-3538(02)00225-7
  45. M. A. Khan, J. Ganster, and H.-P. Fink, "Hybrid composites of jute and man-made cellulose fibers with polypropylene by injection moulding", Compos. Pt. A-Appl. Sci. Manuf., 40, 846 (2009). https://doi.org/10.1016/j.compositesa.2009.04.015
  46. S. K. Nayak, "Degradation and flammability behavior of PP/banana and glass fiber-based hybrid composites", International Journal of Plastics Technology, 13, 47 (2009). https://doi.org/10.1007/s12588-009-0006-2
  47. E. M. Fernandes, V. M. Correlo, J. F. Mano, and R. L. Reis, "Novel cork-polymer composites reinforced with short natural coconut fibres: effect of fibre loading and coupling agent addition", Compos. Sci. Technol., 78, 56 (2013). https://doi.org/10.1016/j.compscitech.2013.01.021
  48. I. S. Aji, E. S. Zainudin, A. Khalina, S. M. Sapuan, and M. D. Khairul, "Studying the effect of fiber size and fiber loading on the mechanical properties of hybridized kenaf/PALF-reinforced HDPE composite", J. Reinf. Plast. Comp., 30, 546 (2011). https://doi.org/10.1177/0731684411399141
  49. K. Okubo, T. Fujii, and E. T. Thostenson, "Multi-scale hybrid biocomposite: processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose", Compos. Pt. A-Appl. Sci. Manuf., 40, 469 (2009). https://doi.org/10.1016/j.compositesa.2009.01.012
  50. H. P. S. A. Khalil, C. W. Kang, and T. O. Adawi, "The effect of different laminations on mechanical and physical properties of hybrid composites", J. Reinf. Plast. Comp., 0, 1 (2008).
  51. L. X. Zhong, S. Y. Fu, X. S. Zhou, and H. Y. Zhan, "Effect of surface microfibrillation of sisal fibre on the mechanical properties of sisal/aramid fibre hybrid composites", Compos. Pt. A-Appl. Sci. Manuf., 2, 244 (2011).
  52. F. P. Gerstle, "Composites," Encyclopedia of Polymer Science and Engineering, Wiley, New York (1991).