DOI QR코드

DOI QR Code

Influence of film-coated Materials on Germination and Seedling Vigor of film-Coated Chinese Cabbage Seeds

필름코팅 소재들이 배추 종자의 발아 및 활력에 미치는 영향

  • Kang, Jum-Soon (Department of Horticulture Bioscience, Pusan National University) ;
  • Kim, Hyeon-Do (Department of Horticulture Bioscience, Pusan National University) ;
  • Lee, Jung-Eun (Department of Horticulture Bioscience, Pusan National University) ;
  • Je, Byoung-Il (Department of Horticulture Bioscience, Pusan National University) ;
  • Lee, Yong-Jae (Department of Horticulture Bioscience, Pusan National University) ;
  • Park, Young-Hoon (Department of Horticulture Bioscience, Pusan National University) ;
  • Choi, Young-Whan (Department of Horticulture Bioscience, Pusan National University)
  • 강점순 (부산대학교 원예생명과학과) ;
  • 김현도 (부산대학교 원예생명과학과) ;
  • 이정은 (부산대학교 원예생명과학과) ;
  • 제병일 (부산대학교 원예생명과학과) ;
  • 이용재 (부산대학교 원예생명과학과) ;
  • 박영훈 (부산대학교 원예생명과학과) ;
  • 최영환 (부산대학교 원예생명과학과)
  • Received : 2021.11.24
  • Accepted : 2021.12.13
  • Published : 2021.12.31

Abstract

The purpose of this study was to identify for extenders, adhesives, colorants, and fungicides suitable for the production of high-quality film-coated seeds of Chinese cabbage. In addition, the effect of various additives used for film coating on the germination of coated seeds and seedling vigor was investigated to establish appropriate treatment conditions for film coating efficiency. The germination rate and germination speed in Chinese cabbage film-coated seeds did not differ significantly depending on the type and concentration of the extender, while the use of Talc resulted in superior granulation capacity and adhesion of the seed coat in comparison to Zeolite. There was no significant difference in the germination rate depending on the type of adhesive used for film coating of Chinese cabbage seeds, but the germination rate was slightly slower in the film-coated seeds using carboxymethyl cellulose as an adhesive. On the other hand, the seeds coated with a film using 1% PVA as an adhesive not only maintained hardness enough to withstand external pressure, but also showed a high germination rate. In addition, the suitable disinfectant for film coating was venoram, and the treatment concentration was good at 250 mg·L-1. The type of colorant used in the film-coated seeds of Chinese cabbage did not significantly affect the germination rate, germination speed, and seedling vigor. The seeds film-coated using the liquid colorant were superior in appearance to the seeds film-coated with the solid colorant, which implies the possibility of reduction in the manufacturing costs by using the water-soluble paints as colorants for film-coated seeds.

Keywords

Acknowledgement

이 과제는 부산대학교 기본연구지원사업(2년)에 의하여 연구되었음.

References

  1. Afzal, I., Javed, T., Amirkhani, M., Taylor, A. G, 2020, Modern seed technology: seed coating delivery systems for enhancing seed and crop performance, Agriculture, 10, 526. https://doi.org/10.3390/agriculture10110526
  2. Amirkhani, M., Mayto, H. S., Netraali, A. N., Taylor, A. G., 2019, A Seed coating delivery system for bio-based biostimulants to enhance plant growth, Sustainability, 11, 5304. https://doi.org/10.3390/su11195304
  3. Avelar, S. A. G., Sousa, F. V., Fiss, G., Baudet, L., Peske, S. T., 2012, The use of film coating on treated corn seed, Revista Brasileira de Sementes, 34(2), 186-192. https://doi.org/10.1590/S0101-31222012000200001
  4. Baxter, J., Waters, L., 1986, Effect of a hydrophilic polymer seed coating on the imbibition, respiration and germination of sweet corn at four matric potentials. J. Amer. Soc. Hort. Sci., 111, 17-20.
  5. Baxter, L., Waters, L., 1986, Effect of hydrophilic polymer seed coating on the field performance of sweet corn and cowpea. J. Amer. Soc. Hort. Sci., 111, 31-34. https://doi.org/10.21273/JASHS.111.1.31
  6. Duan, X., Burris, J. S., 1997, Seed physiology, production & technology, Crop science(USA), 30(6), 1264-1271. https://doi.org/10.2135/cropsci1990.0011183X003000060022x
  7. Geverek, M. N., Atasoy, G. D., Yigit, A., 2012, Growh and yield response of rice(Oryza sativa) to different seed coating agents, Int. J. Agric. Biol., 14(5), 826-830.
  8. Harman, G. E., Taylor, A. G., 1987, Improved seedling performance by integration of biological control agents at favorable pH levels with solid Matrix priming, Phytopathology, 78(5), 520-525. https://doi.org/10.1094/Phyto-78-520
  9. ISF, 2007, Seed treatment (A tool for sustainable agriculture), 1, ISF, 3-4.
  10. Im, D. H., Nam, J. H., Kim, J. H., Lee, M. J., Rho, I. R., 2020, Effect of pelleting treatment on seed germination in Adenophora triphylla, Korean J. Medicinal Crop Sci. 28(2), 128-135. https://doi.org/10.7783/KJMCS.2020.28.2.128
  11. Kang, J. S., 2013, Devlopment of seed tratment and nondestructive classification technology, TRKO2014 00029993, MAFRA, Korea.
  12. Kang, W. S., Kim, M. G., Kim, S, Y., Han, S. H., Kim, D. H., 2020, Effect of seed priming and pellet and pellet coating materials on seedling emergence of Aster koraiensis, J. Korean Soc. For. Sci., 109(1), 41-49.
  13. Kaufman, G., 1991, Seed Coating : A tool for stand establishment; a stimulus to seed quality, HortTechnology, 1(1), 98-102. https://doi.org/10.21273/horttech.1.1.98
  14. Kim, Y. K., 2020, Development of horticultural seed industry and breeding technology, Korean J. Breed. Sci. Special Issue, 103-111.
  15. Korea Seed & Variety Service, 2011, Breed protection gazette, 153, Korea.
  16. KREI, 2014, World Agriculture, E 03-2014-1, KOREA, 67-80.
  17. Kunkur, V., Hunje, R., Patil, N. K. B., Vyakarnhal, B. S., 2010, Effect of seed coating with polymer, fungicide and insecticide on seed quality in cotton during storage, Karnataka Journal of Agricultural Sciences, 20(1), 137-139.
  18. Lee, H. T., 2020, http://www.aflnews.co.kr/news/articleView.html?idxno=202969.
  19. Lowther, W. L., Johnstone, P. D., 1979, Coating materials for commercial inoculated and coated clover seed, N.Z. Journal of Agricultural research, 22, 475-478. https://doi.org/10.1080/00288233.1979.10430776
  20. Robani, H., 1994, Film-coating of Horticultural Seed, HortTechnology, 4(2), 104-105. https://doi.org/10.21273/HORTTECH.4.2.104b
  21. Sahoo, R., Satapathy, B., Sahoo, S., 2014, Growth and physiological responses of the seedling of raphanus sativus following exposure of seed to mercury, Nature Environment and Pollution Technology, 13(1), 173-176.
  22. Scott, D., Archie, W. J., 2021, Sulphur, phosphate, and molybdenum coating of legume seed, New Zealand Journal of Agricultural Research, 21, 4, 643-649. https://doi.org/10.1080/00288233.1978.10427461
  23. Scott, J., M., Jessop, R. S., Steer, R. J., McLachlan, G. D., 1987, Effect of nutrient seed coating on the emergence of wheat and oats, Fertilizer research, 14, 205-217. https://doi.org/10.1007/BF01050665
  24. Sharma, K. K., Singh, U. S., Sharma. P., Kumar, A., Sharma, L., 2015, Seed treatments for sustainable agriculture-A review, Journal of Applied and Natural Science, 7, 1, 521-539. https://doi.org/10.31018/jans.v7i1.641
  25. Smith, A. E., Secoy, M., 1975, Forerunners of Pesticides in classical Greece and Rome, J. Agric. Food Chem., 23, 6, 1050-1055. https://doi.org/10.1021/jf60202a004
  26. Taylor, A. G., Allen, L. S., Bennett, M. A., Bradford, K. J., Burris, J. S., Misra, M. K., 1998, Seed enhancements, Seed Science Research, 8, 245-256. https://doi.org/10.1017/S0960258500004141
  27. Taylor, A. G., Eckenrode, C. J., Strayb, R. W., 2001, Seed Coating Technologies and Treatments for Onion : Challenges and Progress, HortScience, 36(2), 199-205. https://doi.org/10.21273/hortsci.36.2.199
  28. Taylor, A. G., Harman, G. E., 1990, Concepts and technologies of seclected seed treatments, Annual Review of Phytopathology, 28, 321-339. https://doi.org/10.1146/annurev.py.28.090190.001541