DOI QR코드

DOI QR Code

A Study on the Influence of Blending Ratio of Powder and Oil on the Stability of Talc-Free Pressed Powder Formulation

파우더와 오일의 배합 비율이 탈크 프리 프레스드 파우더 제형의 안정성에 미치는 영향에 관한 연구

  • Oh, Ji Won (Department of Applied Biotechnology, Ajou University) ;
  • Kim, Hyun Jee (Department of Applied Biotechnology, Ajou University) ;
  • Kwak, Byeong Mun (College of Korean Medicine, Semyung University) ;
  • Jo, Hantae (Department of Applied Biotechnology, Ajou University) ;
  • Lee, Mi-Gi (Bio-Center, Gyeonggido Business and Science Accelerator) ;
  • Bin, Bum-Ho (Department of Applied Biotechnology, Ajou University)
  • 오지원 (아주대학교 응용생명공학과) ;
  • 김현지 (아주대학교 응용생명공학과) ;
  • 곽병문 (세명대학교 한의과) ;
  • 조한태 (아주대학교 응용생명공학과) ;
  • 이미기 (경기도경제과학진흥원) ;
  • 빈범호 (아주대학교 응용생명공학과)
  • Received : 2020.11.15
  • Accepted : 2021.01.23
  • Published : 2021.03.30

Abstract

The main stability factors of the pressed powder include hardness and drop stability. In general, for pressed powder with talc, the hardness and drop stability are evenly met and the skin texture is excellent. Recently, more than ever customers are looking for a replacement due to asbestos issue of talc. Therefore, it is urgent to develop a pressed powder formulation without talc that maintains stability and does not lose its sense of use. In this study, experiments were conducted to find the optimal ingredients mixing ratio to make talc-free pressed powder. The characteristics of raw materials used mainly in powder were checked and the ratio was changed, and the lightness and hardness were measured and drop test was conducted. If the natural mica ratio was higher than the synthetic mica or non-coated silica was used instead of the coated silica, the hardness and drop stability were lower than the content containing talc, but the lightness was similar. Conversely, if the synthetic mica ratio was equal to or higher than the natural mica ratio and the coated silica ratio was equal to or higher than the non-coated silica ratio, the hardness and drop stability of the content containing talc were similar, but the lightness was low. It was found that the hardness was higher than the content containing talc, but the drop stability was lower. Therefore, further study of the correlation between hardness and fall stability is also thought to be necessary.

프레스드 파우더의 주요 안정성 요인으로 경도와 낙하 안정도가 있다. 일반적으로 탈크가 포함된 프레스드 파우더의 경우 경도와 낙하 안정도를 고르게 충족시키며 사용감도 우수하지만 최근 탈크의 석면 이슈로 인해 대체를 원하는 고객들이 늘고 있다. 따라서 안정성을 유지하면서 사용감도 떨어지지 않는 탈크 프리 프레스드 파우더 제형의 개발이 시급하다. 본 연구에서는 탈크 프리 프레스드 파우더를 만들기 위한 최적의 원료 배합 비율을 찾기 위한 실험을 진행하였다. 파우더에 주로 사용되는 원료들의 특성을 확인하고 비율을 변화시켜 실험하여 명도와 경도를 측정하고 낙하 시험을 실시하였다. 천연 마이카 함량이 합성 마이카보다 많거나, 코팅된 실리카 대신 논 코팅 실리카를 사용할 경우 탈크가 포함된 내용물보다 경도와 낙하 안정도는 낮지만 명도는 유사하였다. 반대로 합성 마이카 함량이 천연 마이카 함량과 동일하거나 높을 경우, 코팅된 실리카 함량이 논코팅 실리카 함량과 동일하거나 높은 경우에 탈크가 포함된 내용물의 경도, 낙하 안정도와는 유사하였으나 명도는 낮게 측정되었다. 탈크가 포함된 내용물보다 경도는 높지만 낙하 안정성은 떨어지는 현상도 발견하여 경도와 낙하 안정성의 상관관계에 대해서는 추가적인 연구가 필요할 것으로 생각된다.

Keywords

References

  1. C. H. Lee, S. E. You, H. H. Lee, H. Y. Kim, S. M. Kim, and Y. J. Chung, Component analysis and reproduction of a brown solid cosmetic excavated from tomb of princess Hwahyeop, J. Conserv. Sci., 36(5), 430 (2020). https://doi.org/10.12654/JCS.2020.36.5.12
  2. Korea Patent 10. 2013. 0034555 (2013).
  3. P. W. Pairaudeau, R. G. Wilson, and M. Milne, Inhalation of baby powder: an unappreciated hazard, BMJ, 302(6786), 1200 (1991). https://doi.org/10.1136/bmj.302.6786.1200
  4. D. U. Park, Possible health risk over talc, J. Env. Hlth.Sci, 35(3), 235 (2009).
  5. S. I. Han, K. C. Jang, W. D. Seo, S. H. Oh, J. E. Ra, Y. C. Song, J. H. Lee, B. J. Kim, M. H. Nam, and J. T. Lee, Studies of physicochemical properties of baby powder developed from rice-flour, J. Life Sci., 23(7), 879 (2013). https://doi.org/10.5352/JLS.2013.23.7.879
  6. S. Y. Kang, Master's Thesis Dissertation, Hanseo Univ., Korea (2011).
  7. J. N. Lee, Basic cosmetics theory and practice, eds. J. N. Lee, 119, Edam Books, Gyeonggi-do, Republic of Korea (2012).