Optical fiber networks for microwave signal processing have been investigation . Theoretical and experimental results are presented in Z-shaped Double-Coupler Optical Resonator. The use of Mason's rule to calculate transfer functions greatly simplified the analysis in our model. A good comparison between modelling and experiment is presented.

Polygon Mirror Scanning(PMS) is composed of LED array, magnifying lens, polygon mirror and motor. It is important to correct the lens aberrations to gain the image we want to show. In this paper, we have simulated the lens aberration correction to reduce the spherical aberration . We have obtained a aspherical lens which is corrected the spherical aberration.

A tapered ridge mode laser diode with increased spot size is designed and analyzed . The mode evolution concept is applied to design the taper and the method does not require regrowth or multiple-step etching technique. Three-dimensional BPM results show that the designed taper can transfer more than 97% of the mode power in the active region to the expanded mode.

Single crystals of Yttrium Calcium Oxyborate (YCOB) doped with different concentrations of Er3+ and Yb3+ ions were growth by Czochralski method. High qualities of crystals in morphology and transparency were obtained . Analysis on crystal structure and lattice parameters were performed by X-ray diffraction method. It was found that congruent melting composition is YCA4.2O1.2(BO3)3. Absorption and fluorescence properties of grown crystals were also reported.

The structural dependence of harmonic and intermodulation distortion characteristics in 1.55${\mu}{\textrm}{m}$ DFB-LCD were investigated. The linearity of 1.55${\mu}{\textrm}{m}$ DFB-LD was greatly improved by employing a partially corrugated structure.

In the fiber-optic gyroscope employing the erbium-doped fiber source, the source excess noise was subtracted through a signal processing to improve the gyroscope sensitivity . As the result, we obtained the improvement of 14 dB(electrical) at the proper frequency, which was measured from the noise floor spectrum . In addition the random walk coefficient in the gyro output was reduced by about factor of three.