• Title/Summary/Keyword: 유로

Search Result 24,108, Processing Time 0.052 seconds

폐윤활유 정제기술

  • 박상도
    • Tribology and Lubricants
    • /
    • v.10 no.2
    • /
    • pp.20-29
    • /
    • 1994
  • 우수한 기유와 첨가제들이 혼합된 양질의 윤활유라 할지라도 윤활유는 사용중에 차차 변질하여 그 성상이 저하하게 되는데 이와 같은 윤활유의 열화현상은 윤활유 자신이 일으키는 내부변화 즉, 화학변화와 외부적 요인에 의하여 생기는 윤활유의 오염 등에 기인하는 것으로 알려져 있다. 열화현상이 발생되면 폐윤활유는 주기적으로 교체하여야 하는데 소모성 물질이 아닌 윤활유는 국내에서 93년도 기준 년간 약 750,000 k1의 윤활유가 사용되어지고 있다. 윤활유 사용으로부터 발생된 폐윤활유는 첫째, 원유내의 윤활 성분이 10~15%인데 비하여 폐윤활유는 약 85% 이상의 윤활성분이 포함되어 있어 윤활기유의 회수율이 높으며 둘째, 폐윤활유내의 불순물은 윤활성분과는 물리화학적 성질이 달라 쉽게 분리될 수 있으며 셋째, 폐윤활유는 윤활유로서의 부적당한 물질은 이미 열화나 산화에 저거된 상태이므로 재정제가 용이하다는 장점이 있어 폐자원 재활용 측면에서 오래전 부너 관심의 대상이 되어왔다.

심해 침몰유조선 잔존유 회수작업 종료절차에 대한 합리성 증대방안

  • Gang, Gwang-Gu;Sim, Yu-Taek;Gang, Sin-Yeong
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2013.10a
    • /
    • pp.29-31
    • /
    • 2013
  • 유조선이 화물유 탱크 내 유류를 적재한 채 국내 연안 해저면에 침몰하는 경우 화물유 탱크 내 적재유가 유출되어 대형 오염사고로 연결될 가능성이 있으므로 화물유 탱크 내 적재유는 신속하고 안전하게 제거 되어야만 한다. 심해 수중작업 특성상 이러한 잔존유 회수작업 완료 후 화물유 탱크 내 잔존유 제거상태의 직접적 확인은 매우 곤란하므로 회수작업 종료 기준 및 절차는 매우 중요하다. 이에 따라, 국내에서 실제 이루어 진 제1유일호 및 제3오성호, 경신호 잔존유 작업사례에 적용된 회수방법에 따른 종료절차를 비교분석하여, 향후 국내 연안에 침몰되는 유조선 잔존유 회수작업에 적용 가능한 합리적 표준 작업종료 절차를 제시하였다.

  • PDF

The Effect of Low Erucic Acid Rapeseed Oil for the Preparation of Mayonnaise on Quality Characteristics (마요네즈 제조시 품질특성에 미치는 저에루신산 유채유 혼합의 영향)

  • Kim, Jae-Wook;Son, Yang-Do;Hong, Ki-Ju;Yoo, Moo-Yeong;Jeong, Gae-Whan;Hur, Jong-Wha
    • Korean Journal of Food Science and Technology
    • /
    • v.27 no.3
    • /
    • pp.298-302
    • /
    • 1995
  • This study was performed to know the availability of low erucic acid rapeseed oil (LEAR oil) for vegetable oil in commercial mayonnaise preparation. Mixed oils (blended soybean oil with LEAR oil) were prepared and mayonnaises were prepared with these oils and then compared the quality characteristics of these samples. The oxidative stability of vegetable oil with Rancimat test showed that LEAR oil was higher stability than soybean oil, and became higher with increase of LEAR oil ratio. Quality characteristics of mayonnaises with these oils showed that mayonnaise with mixed oils was preferred to that with LEAR oil itself. Furthermore, the quality characteristics of mayonnaises with mixed oils of soybean oil $(20{\sim}60%)$ plus LEAR oil $(80{\sim}40%)$ were better than those of mayonnaise with soybean oil solely.

  • PDF

A Study on the Flow Characteristics in a Torque Converter (토크 컨버터 유동특성에 대한 연구)

  • Yoo, S.C.;Jang, S.K.
    • Journal of Power System Engineering
    • /
    • v.12 no.5
    • /
    • pp.20-26
    • /
    • 2008
  • 양산되는 승용차용 토크 컨버터 내부의 유동을 LDV 측정 기술을 이용하여 정량화했다. 속도비 0.4와 0.8 경우에 대한 속도 측정을 통해 임펠러 유로 중간과 출구 영역의 질량 유동율 특성을 분석했다. 측정 단면의 속도 분포는 유로의 위치와 속도비에 따라 많은 차이를 보이며, 특히 속도비 0.8 조건에서 임펠러 유로 중간영역 흡입면 부근의 유동은 유동박리에 의한 재순환 현상을 나타내며, 이와는 대조적으로 출구 영역에서는 흡입면을 따라 역류 현상이 발생한다. 임펠러 유로 내부의 유동은 각 영역에서 속도비에 따라 개별적 유동 특성을 보인다. 질량 유동율은 모든 속도비와 측정단면에서 주기적인 변화를 보이며, 또한 터빈의 순간적인 위치가 임펠러 유로 측정단면의 질랑 유동율에 매우 큰 영향을 미치는 것이 밝혀졌다 따라서 토크 컨버터 임펠러의 유로 방향 유동 특성 변화는 컨버터 설계에 중요하게 고려되어야 할 것으로 보인다.

  • PDF

하도내 유로변화 특성 분석기법

  • Son, Kwang Ik;Han, Kun Yeun;Yun, La Young
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2004.05b
    • /
    • pp.1345-1349
    • /
    • 2004
  • 하천수를 취수원으로 하는 우리나라의 많은 취수장의 경우, 유사유입 및 유로 변경에 따른 취수장애를 겪고 있으나 유로의 변화특성을 분석하고 취수장 위치선정에 활용한 수 있는 실무적 기법에 대한 연구는 거의 없는 실정이다. 따라서 본 연구에서는 유로가 좌${\cdot}$우안으로 수시로 바뀌어 갈수기는 물론 평수기에도 취수장애를 겪고 있어 대책 강구가 요구되는 국내 취수장을 선정하고 취수지점의 계속적인 하상 및 유로변동 현상을 규명하여 안정적인 취수를 가능케 하는 근본적인 대책을 수립하기 위한 유로변화 특성 분석기법을 제시하였다. 연구내용으로는 과거 30여년에 걸친 하도의 평면학적 변화양상을 인공위성영상자료, 지형도자료 및 하도단면 실측자료를 활용하여 각 지점별 유로변화에 대한 동계분석을 실시하였다. 또한 하도의 전단응력, 마찰 속도 등을 산정하여 하상형태를 분석하여 대상구간의 흐름특성을 분석하였다. 분석결과 하도의 사행은 지속적으로 진행되고 있음을 알 수 있으며 특히 취수장부터 상류 수km구간 하도에서는 밤섬이 지속적으로 생긴다 사라지는 현상이 반복되고 있음을 확인할 수 있었다. 취수장 주변에서는 유로의 변동이 하폭의 $70\%$에 달하는 심한 유로변화 특성을 나타내고 있어 취수지점으로 적당치 못함을 알수 있었으며 주변 상하류 십수 km구간 중에는 유로의 변화가 거의 없는 구간도 존재함을 알 수 있이 본 연구의 유로변화 분석기법이 향후 유로변화 분석 및 취수장 건설 위치 선정에 효과적인 분석기법으로 활용 가능함을 입증하였다.

  • PDF

Oxidative Stability and Flavor Compounds of Sesame Oils Blended with Vegetable Oils (식물성유를 첨가한 참기름 혼합유의 산화 안정성과 향기 성분)

  • Joo, Kwang-Jee;Kim, Jin-Ju
    • Korean Journal of Food Science and Technology
    • /
    • v.34 no.6
    • /
    • pp.984-991
    • /
    • 2002
  • Oxidative stability and flavor of sesame oil blended with canola oil (Ca), corn oil (Co), and soybean oil (Sb) at ratios of 90 : 10, 70 : 30, and 50 : 50 (w/w), respectively, were evaluated. Oxidative stability of sesame oil increased with the addition of vegetable oils (10, 30, and 50% of Ca and Co, and 10% of Sb). Pyrazines, pyrroles, pyridines, and thiazoles, good contributors to the characteristic flavor of sesame oil, were also found in sesame oil blended with vegetable oil. The sensory evaluation showed that no difference was observed between sesame oil and sesame oil blended with 10% of Ca, Co or Sb, which showed higher oxidative stability.

Simulation of Fuzzy Incident Detection System in Freeway (고속도로에서의 퍼지 유고 감지 시스템의 시뮬레이션)

  • 이응기
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 1998.03a
    • /
    • pp.56-60
    • /
    • 1998
  • 유고 감지 시스템은 검지기로부터 얻은 데이터를 분석하여 특정 구간의 유고 발생 여부를 판단하는 시스템으로 교통 관제의 측면에서 매우 중요한 역할을 한다. 본 논문에서는 속도, 밀도 그리고 교통량의 변화와 같은 다양한 유고 감지 변수를 어떻게 퍼지 시스템에 사용하는가를 보여주고 기존의 알고리즘이 안고 있던 문제점들을 해결하기 위한 퍼지 유고 감지 알고리즘을 제안한다. 또한 시뮬레이션을 통해서 제안된 퍼지 유고 알고리즘의 성능을 평가한다.

  • PDF

The Study on the Oxidative Stability of Mixed Rapeseed oil with Palm oil (팜유 혼합유채유의 산화안정성에 관한 연구)

  • 현영희;안명수
    • Korean journal of food and cookery science
    • /
    • v.9 no.4
    • /
    • pp.317-322
    • /
    • 1993
  • Two kinds of simple and interesterfying mixed rapeseed oil were prepared according to add 30%, 50% and 70% of coconut and palm oil, then the physicochemical propecties such as the tedency of oxidation, foaming activity were Investigated. The initial AV and POV of interesterifyung mixed rape-seed oils were higher than those of simple mixed oils, but the tendencies of oxidation were similar. The intial value of IV interesterfied rapeseed oils was added in simple mixed rapeseed oil, Induction period were increased about 2.4~4 times. Induction period of intereterifyng mixed oils added palm ell increased about 2~3.2 times. While the foaming Buantity of interesterifing mixed rapeseed oils with palm oil were lower about 28~40% than those of the simple mixed rapeseed oils.

  • PDF

Rib-Dimple Compound Cooling Techniques in a Gas Turbine Blade Cooling Channels with an Aspect ratio (4:1) (4:1 종횡비를 갖는 가스터빈 블레이드 냉각 유로에서의 립-딤플 복합 냉각 특성 연구)

  • Choi, Yong-Duck;Kim, Seok-Beom;Lee, Yong-Jin;Kim, Jin-Kon;Kwak, Jae-Su
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2010.05a
    • /
    • pp.304-310
    • /
    • 2010
  • Heat transfer coefficients in a dimpled channel, a ribbed channel, and a rip-dimple compound channel were measured by the transient liquid crystal technique. The channel aspect ratio, the rib height, the rip pitch, and the rib angle were 4:1, 6 mm, 60 mm and $60^{\circ}$, respectively. The dimple diameter and the center-to-center distance were 6mm and 7.2 mm, respectively, and the Reynolds number range was 30,000-50,000. Results showed that the heat transfer coefficients were increased by the angled rib. For the dimple-rib compound cooling cases, the heat transfer coefficients were further augmented and the thermal performance factor for the case was the highest.

  • PDF

Rib-Dimple Compound Cooling Techniques in a Gas Turbine Blade Cooling Channels with an Aspect ratio (4:1) (4:1 종횡비를 갖는 가스터빈 블레이드 냉각 유로에서의 립-딤플 복합 냉각 특성 연구)

  • Choi, Yong-Duck;Kim, Seok-Beom;Lee, Yong-Jin;Kim, Jin-Kon;Kwak, Jae-Su
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.14 no.4
    • /
    • pp.32-38
    • /
    • 2010
  • Heat transfer coefficients in a dimpled channel, a ribbed channel, and a rip-dimple compound channel were measured by the transient liquid crystal technique. The channel aspect ratio, the rib height, the rip pitch, and the rib angle were 4:1, 6 mm, 60 mm and $60^{\circ}$, respectively. The dimple diameter and the center-to-center distance were 6mm and 7.2 mm, respectively, and the Reynolds number range was 30,000-50,000. Results showed that the heat transfer coefficients were increased by the angled rib. For the dimple-rib compound cooling cases, the heat transfer coefficients were further augmented and the thermal performance factor for the case was the highest.