• 복식
• /
• 제55권4호
• /
• pp.95-106
• /
• 2005

The purpose of this study was to research the design methods to express jacquard design using CAD. For this study, two design patterns were divided; in addition, each design pattern is applied to two different weaving types, single woven fabric and double well cloths. As a result, 16 samples were produced by applying 4 design methods (warp shrunk as half size design/weft shrunk as half size design - A, warp shrunk as half size design/weft original size design - B, warp original size design/weft shrunk as half size design - C, warp original size design/weft original size design - D) to the two design patterns with the two weaving types. The result of this study can be summarized as follows. 1. The most delicate design method was Method D. However, Method B which took half the time less than Method D was almost as delicate as the Method D on the surface. 2. Method B was judged as a considerably efficient method for time and cost. 3. Method D was considered as most suitable for elaborate parts and delicate lines. However, it was considered uneconomical since it took the longest time. 4. Mettled A took 2.5 times less time than Method D. Therefore, Method A was more applicable to producing high density design. 5. Method C is not considered as a useful method as it showed rough surface and took long time by applying high design zoom except intentional design.

• 한국가구학회지
• /
• 제20권4호
• /
• pp.339-357
• /
• 2009

Probability based design(PBD) method is independent of construction materials and uses real material properties unlike allowable stress design(ASD) that depends on small clear specimen property, also give quantitative safety and endurance lifetime of a certain material. Moreover, almost advanced country accepted PBD method instead of ASD method. So it is urgent to convert the current ASD method into the PBD method. However, there are wholly lacking of domestic researches related to current issue, and to solve several points in ASD method and to take advantage of PBD method, the conversion from the ASD method into the PBD method is a worldwide trend. Other domestic construction codes, such as steel or concrete constructions, accept the PBD method as well. Accordingly, to introduce PBD method into wood structural design, general theory, and preliminary data and methods were reviewed. With keeping this in mind, some important contents were reviewed, sorted some points for wood structural design that have distinctions against the other construction materials. Furthermore, the history of PBD method, and statistical data and theories for the PBD method, and preliminary data of resistance and load that are two random variables for the PBD method, and finally the difference between limit state design(LSD) and load and resistance factor design(LRFD) that were two superpowers in the PBD method.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.71-83
• /
• 2017

This research suggests a new idea conception method for creative thinking to develop a creative fashion design. The common characteristics of the design area, the unique characteristics of the fashion design, and idea conception method for creative thinking were analyzed and reviewed to develop a creative fashion design research model. Based on this, the fashion design research model was planned through an attempt to graft a new idea conception method on an existing method to utilize the advantage of it suitable for fashion design characteristics and designated as an idea conception method for a creative fashion design research model. We developed 10 designs with a full awareness of the research model steps; subsequently, the effectiveness was confirmed through the evaluation phase of the research model that utilized the idea conception method. This research has significance in that the research model utilizing idea conception method that rarely addressed in precedent research was developed with the idea conception method as a research subject by drawing the characteristics for an idea conception of fashion design and new approach was tried that emphasized the advantages of the existing method.

• Structural Monitoring and Maintenance
• /
• 제5권2호
• /
• pp.261-272
• /
• 2018

The commonly used TMD design method in the project assumes the TMD has pure linearity. However, in real engineering TMD will exhibit nonlinear behaviors. Without considering the nonlinearity of TMD, the control effect of the TMD that is designed by the linear design method, may be worse and even enlarge the structural response. In this paper, based on the previous study results of nonlinear TMD, the improved design method for engineering application is proposed. The linear design method and the improved design method are compared. Taking the best parameter obtained by the improved design method is less than or equal to 90% of that obtained by the original design method as the dividing line. The critical nonlinear coefficient, reaching which value the improved design method needs to be used, is given. Finally, numerical simulations on two engineering examples are conducted to proof the results.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.239-246
• /
• 2003

A new earthquake design method performing iterative calculations using secant stiffness was developed. The proposed design method has the advantages of convenience and stability in numerical analysis because it uses elastic analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it performs the analysis on the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. Design examples using the proposed method were presented, and its advantages were presented by the comparisons with existing design methods using elastic or inelastic analysis. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer, such as ductility limit on each member, the design concept of strong column - weak beam, and etc. Through iterative calculations on the structure preliminarily designed only with member sizing, the strength and ductility demands of each member can be directly calculated so as to satisfy the given design strategy As the result economical and safe design can be achieved.

• 한국의상디자인학회지
• /
• 제25권1호
• /
• pp.133-152
• /
• 2023

The purpose of this study is to provide basic data to assist students and designers in the fashion industry by examining the trend of designing women's wear using the SCAMPER method. In the research, five SCAMPER methods for fashion design were classified based on the previous studies. From 2018 S/S to 2022 F/W, data from 3,512 photographs were collected and checked for overlapping and were then classified by SCAMPER method. Data analysis was performed using SPSS 26 for frequency analysis. As a result, the most common application of the SCAMPER method was in 2022. First, the most used SCAMPER method for design was the "modify" method, changing details into various forms. The second method was the "adapt" method in which parts of the design or details were added and connected. The third mehtod was the "magnify" method of enlarging the length of the jacket. The fourth method was the "eliminate" method, removing parts of the jacket bodice, collar, or sleeves.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.492-497
• /
• 2004

Three methods for design sensitivity such as numerical differentiation, analytical method and semi-analytical method have been developed for the last three decades. Although analytical design sensitivity analysis is exact, it is hard to implement for practical design problems. Therefore, numerical method such as finite difference method is widely used to simply obtain the design sensitivity in most cases. The numerical differentiation is sufficiently accurate and reliable for most linear problems. However, it turns out that the numerical differentiation is inefficient and inaccurate because its computational cost depends on the number of design variables and large numerical errors can be included especially in nonlinear design sensitivity analysis. Thus semi-analytical method is more suitable for complicated design problems. Moreover semi-analytical method is easy to be performed in design procedure, which can be coupled with an analysis solver such as commercial finite element package. In this paper, implementation procedure for the semi-analytical design sensitivity analysis outside of the commercial finite element package is studied and computational technique is proposed, which evaluates the pseudo-load for design sensitivity analysis easily by using the design variation of corresponding internal nodal forces. Errors in semi-analytical design sensitivity analysis are examined and numerical examples are illustrated to confirm the reduction of numerical error considerably.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.116-121
• /
• 2005

This research against the method of applying a traditional design elements to modern interior space is classified and analyzed by direct expression method, a transfigure expression method, a metaphor expression method and a symbol expression method. The direct expression method means the modernizing the traditional design elements by expressing traditional material and structural formative style as they are, and the transfigure expression method is the design method of re-organizing the elements by simplifying and transfiguring the traditional design elements. Metaphor expression method includes the method of expressing visually the formative concept which does not known concretely, and the symbol expression method exchanges the rising concepts into concrete elements and expresses by new design.

• 한국전산구조공학회논문집
• /
• 제18권1호
• /
• pp.51-59
• /
• 2005

SLSV(single loop single vector)방법은 신뢰성기반 최적설계(reliability-based design optimization, RBDO)에서 중첩된 반복과정을 제거함으로써 최적설계의 과도한 계산비용 문제에 대한 해결책을 제시하고 있지만, 종종 수렴하지 못하거나 잘못된 해가 얻어지는 등의 불안정성, 부정확성 문제를 가지고 있어 그 활용이 제한적이다. 본 논문에서는 수정된 HMV(hybrid mean value)방법, Inactive Design, Active MPP(most probable point) Design의 적용을 통해 SLSV방법에 있어서 안정성과 효율성을 효과적으로 개선시킬 수 있는 수정된 SLSV방법을 제안하였고 또한 다양한 예제를 통해 수정된 SLSV방법의 유용성을 검증하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.498-501
• /
• 2004

A new slab design using secant stiffness, Direct Inelastic Slab Design, was developed. Since basically the proposed design method uses linear analysis, it is convenient and stable in numerical analysis. At the same time, the proposed design method can accurately estimate the inelastic strength and ductility demands of slab because it can analyzes the inelastic behavior of structure using iterative calculations for secant stiffness. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. Design examples using the proposed method were presented, and compared with traditional nonlinear analysis, and experiments. The Direct Inelastic Slab Design, as an integrated analysis/design method, can directly address the design strategy intended by the engineer, such as moment strength and ductility limit. As a result, economical and safe design can be achieved.