한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제24권1호
  • /
  • Pages.57-63
  • /
  • 2007
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

층간분리 방지를 위한 건식 등온 신선 패스 설계

Isothermal Pass Schedule to Prevent Delamination in the Dry Wire Drawing Process

  • 고대철 (부산대학교 동남권부품소재산학협력혁신연구소) ;
  • 이상곤 (부산대학교 대학원 정밀기계공학과) ;
  • 김민안 (부산대학교 대학원 정밀기계공학과) ;
  • 김병민 (부산대학교 정밀정형 및 금형가공 연구소)
  • 발행 : 2007.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Wire drawing process of the high carbon steel with a high speed is usually conducted at room temperature using a number of passes or reductions through consequently located dies. In the multi-pass drawing process, temperature rise in each pass affects the mechanical properties of the final product such as bending, torsion, and tensile property, etc. This temperature rise during the deformation promotes the occurrence of delamination, and deteriorates the torsion property and durability of wire. This study investigates the occurrence of delamination in the wire through the torsion test and the evaluation of wire temperature. The excessive wire temperature leads to the occurrence of the delamination. Based on the calculation of the wire temperature, a new pass schedule, which can prevent the delamination due to the excessive wire temperature rise, is designed through the isothermal pass schedule.

키워드

참고문헌

  1. Nakamura, Y., Fujita, T., Kawakami, H. and Yamada, Y., 'New Cooling System for High-Speed Wire Drawing,' Wire J., Int., Vol. 9, pp. 59-68, 1976
  2. Kim, Y. S., Kim, D. H., Kim, B. M., Kim, M. A. and Park, Y. M., 'Development of Wire Temperature Prediction Method in a Continuous Dry Wire Drawing Process Using the High Carbon Steel,' J. of the KSME, Vol. 25, No.2, pp. 330-337, 2001
  3. Shimizu, K. and Kawabe, N., 'Fracture mechanics aspects of delamination occurrence in high-carbon steel wire,' Wire J., Int., pp. 88-97, March 2002
  4. Heizmann, J. J., Tidu, A., Bolle, B. and Peeters, L., 'Influence of the crystallographic texture on the torsional behavior of steel cord,' Wire J., Int., pp. 150-158, July 1999
  5. Golis, B., Pilarczyk, J. W., Blazejowski, Z. and Dyja, H., 'Small final reductions in the drawing process of rope wires,' Wire J., Int., pp. 184-199, March 2000
  6. Lefever, I., D'Haene, U., Raemdonck, W. V., Aemoudt, E., Houtte, P. V. and Sevillano, J. G., 'Modeling of the delamination of high strength steel wire,' Wire J., Int., pp. 90-99, June 1998
  7. Ibaraki, N., Makii, K., Ochiai, K. and Oki, Y., 'Wire rods for ultra tensile steel cord,' Wire J., Int., pp. 122-129, March 2000
  8. Kim, Y. S., Kim, D. H., Kim, B. M., Kim, M. A. and Park, Y. M., 'Development of Isothermal Pass Schedule Program for the Re-design of a Continuous High Carbon Steel Wire Drawing Process,' J. of the KSPE, Vol. 18, No.5, pp. 57-64, 2001