DOI QR코드

DOI QR Code

The Influence of Additives Added to the Melamine and Formalin Mixtures on Sericin Fixation of Raw Silk Fibers

멜라민과 포르말린 혼합액의 첨 가제들이 실크 생사의 세리신 정착에 미치는 영향

  • 박건용 (청운대학교 패션디자인섬유학과)
  • Published : 2009.02.28

Abstract

In order to investigate the effective sericin fixation of raw silk fibers the influence of various additives added to the melamine and formalin mixtures on sericin fixation was studied. When raw silk fibers were treated with wetting agent but without subsequent washing before sericin fixation, the strong sericin fixation was obtained by fixing sericin. Adding hydrogen peroxide to the melamine and formalin mixture made sericin fixation worse, resulting weaken the sericin hardness of fixed raw silk fibers and tight bonding of the fibers. On the other hand, it was confirmed that adding sodium hydrosulfite to the melamine and formalin mixtures gave better sericin hardness of fixed raw silk fibers without the bonding of fibers. Supplying additional melamine with he low concentration of sodium hydroxide to the melamine and formalin mixture(melamine:formalin= 1:6) resulted in very good sericin fixation. But adding hydrochloric acid or methanol to the same mixture had no effect on the sericin fixation, and adding magnesium chloride to it made the hardness of sericin fixation even worse.

실크 생사의 세리신 정착을 보다 효과적으로 하기위해 멜라민과 포르말린의 혼합액에 각종 첨가제를 첨가했을 때 첨가제가 세리신 정착에 미치는 영향을 살펴보았다. 멜라민과 포르말린의 혼합액으로 세리신을 정착할 때 수분침투 기능이 있는 계면활성제로 전처리라고 수세하지 않은 경우 견고한 정착이 이루어졌고, 정착액에 과산화수소를 첨가한 경우 정착 효과가 크게 떨어지면서 단사 간에 접착하는 문제가 발생했고, 하이드로를 첨가하여 $60^{\circ}C$에서 정착하는 경우에는 표백과 동시에 세리신 정착이 가능함을 확인했다. 낮은 농도의 수산화나트륨을 첨가한 알칼리 조건에서 멜라민을 추가함으로써 매우 견고한 세리신 정착 결과를 얻었으나 염산과 메탄을 추가는 정착에 그다지 효과적이지 못했고, 염화마그네슘 추가는 오히려 세리신 정착 견고성을 크게 저하시켰다.

Keywords

References

  1. 加藤弘, "絹纖維の加工技術とその應用", 纖維硏究社, 東京, pp.241-245, 1988.
  2. 배도규, "Formalin과 Glutaraldehyde 혼합 처리에 의한 세리신정착", 한국잠사학회지, 제36권, pp. 152-156, 1994.
  3. 문영배, 남중희, "Epoxy수지에 의한 견직물의 Sericin 정착", 한국잠사학회지, 제26권, pp. 16-25, 1984.
  4. 박건용, "열경화성 수지 단량체에 의한 실크 생사의 세리신 정착에 관한 연구", 산학기술연구, 제3권, pp. 61-66, 2008.