권호 표지

한국통신학회논문지 (The Journal of Korean Institute of Communications and Information Sciences) (The Journal of Korean Institute of Communications and Information Sciences)

한국통신학회 (The Korean Institute of Commucations and Information Sciences)

  • 월간
  • /
  • 1226-4717(pISSN)
  • /
  • 2287-3880(eISSN)

Aim & Scope

한국통신학회 논문지는 정보, 통신, 네트워크 및 융합 기술에 관련된 주제를 다루는 전문 학술지입니다. 정보, 통신, 네트워크 및 융합 기술에 관련된 새로운 개념, 이론, 기술과 응용까지 논문에서 다루는 주제에 따라 일반논문(통신이론 및 시스템/네트워크 및 서비스/융합기술/구현논문), 특집논문으로 분류하여 발행되고 있습니다. 일반논문에서 다루어지는 주제어는 다음 홈페이지에서 볼 수 있습니다. [J-KICS(A,B,C,D) Keywords] *일반 물리계층분야 (A) : 통신/정보이론, 정보통신 시스템(특히, 물리계층 및 링크계층)과 관련된 주제를 중심으로 하고, 이외에도 정보통신 시스템의 응용으로서의 다양한 신호 및 정보처리, 이동체 기술 등의 주제에 대해서도 포괄적으로 논문을 모집/출판하고 있습니다. 상위계층분야 (B) : 다양한 네트워크의 MAC계층, 네트워크 계층, 전달 계층 그리고 어플리케이션 계층에 관련된 주제를 중심으로 하는 전문 학술지로서 이외에도 다양한 유무선통신 네트워크의 제어 기능, 이동성 관리 기능, 전력 관리 기능 등의 주제를 포함하는 논문을 모집/출판하고 있습니다. 융합분야 (C) : 통신 및 네트워크 전 분야 및 ICT 융합 분야를 망라하며 논문을 모집/출판하고 있습니다. 구현분야 (D) : 통신 및 융합분야 시스템의 설계 및 구현에 관련된 주제를 중심으로 하고 있으며 이외에도 정보통신과 관련된 여러 가지 다양한 시스템의 응용 및 적용 등의 주제에 대해서도 포괄적으로 논문을 모집/출판하고 있습니다. *특집 매월 특집 주제에 관한 논문을 출판하고 있습니다. 주제는 통신 및 네트워크 전 분야 및 ICT 융합 분야를 망라하며 이 중 현재 연구가 활발한 분야, 미래 유망 분야를 선정하여 매월 특집 주제로 선정하게 되며 선정된 특집 주제에 맞는 초청 편집장 및 초청 편집위원을 구성하여 논문을 모집, 출판을 하고 있습니다. 특집 주제, 논문 투고 일정 및 방법은 한국통신학회 홈페이지에 안내가 되며 투고 논문은 6주 이내의 긴급 심사를 통하여 게재 승인된 논문은 게재 일정에 따라 출판이 되게 됩니다.

https://www.kics.or.kr/home/kor/article/submission/submission_00.asp KSCI KCI

제25권10B호

  1. 최승욱 1641
    PDF
    This paper presents an analysis of coverage and capacity for the multi-layer CDMA cellular system. The multi-layer CDMA system that shares a common frequency band consists of macrocells for outdoor users and picocells for indoor users. Though macrocells and picocells interfere with each other the capacity of the whole system can be increased, We have analyzed the effect of muual interference upon cell coverage soft handover areas and capacities. The parameters involved in the engineering of the system are discussed. The study results sow that we can control the service coverage of indoor picocells with the system parameters set properly. It is also show that the capacity of the whole system that the capacity of the whole system can be enhanced smoothly by deploying the indoor picocells within existing macrocells.
  2. 정성무 1648
    PDF
    This paper proposes a real-time dynamic storage allocation algorithm QSHF(quick-segregated-half-fit) that provides various memory allocation policies. that manages a free block list per each word size for memory requests of small size good(segregated)-fit policy that manages a free list per proper range size for medium size requests and half-fit policy that manages a free list per proper range size for medium size requests and half-fit policy that manages a free list per each power of 2 size for large size requests. The proposed algorithm has the time complexit O(1) and makes us able to easily estimate the worst case execution time(WCET). This paper also suggests two algorithm that finds the proper free list for the requested memory size in predictable time and if the found list is empty then finds next available non-empty free list in fixed time. In order to confirm efficiency of the proposed algorithm we simulated the memory utilization of each memory allocation policy. The simulation result showed that each policy guarantees the constant WCET regardless of memory size but they have trade-off between memory utilization and list management overhead.
  3. 임동규 1665
    PDF
    This paper treats the interworking of LAN-based networks like TCP over the ATM protocol stack in an ATM multicast session. Multicast connection will cause CIP since multicast group members form a connection tree by some tree methods and share the connected tree. The paper solve the CIP problem through a block-by-block transmission using ABT/IT method. ABT/IT RM cell is modified and block scheduling algorithm considering the traffic types is applied to each ATM switch using the enhanced RM cell. Block scheduling algorithm will avoid the indiscriminate discard of UBR traffic when congestion occurs and it can provide an efficient and fair service. The paper builds a block scheduler system and suggests the block scheduling algorithm for a multicast session in an ATM switch. UBR traffics arriving at the switch trough each VC is classified by the traffic type and stored at class buffer and thereafter indisciminately transmitted. When block scheduling algorithm is applied it will improve the UBR traffic performance such as end-to-end delay cell block loss ration etc. This paper evaluated the performance of block scheduling algorithm through the simulation using the C language and data structure.
  4. Chung, Sun-Tae 1675
    PDF
    We present CReMeS a CORBA-compliant design and implementation of a new real-time communication service. It provides for efficient predictable and scalable communication between information producers and consumers. The CReMeS architecture is based on MidART's Real-Time Channel-based Reflective Memory (RT-CRM) abstraction. This architecture supports the separation of QoS specification between producer and consumer of data and employs a user-level scheduling scheme for communicating real-time tasks. These help us achieve end-to-end predictability and allows our service to scale. The CReMeS architecture provides a CORBA interface to applications and demands no changes to the ORB layer and the language mapping layer. Thus it can run on non real-time Off-The-Shelf ORBs enables applications on these ORBs to have scalable and end-to-end predictable asynchronous communication facility. In addition an application designer can select whether to use an out-of-band channel or the ORB GIOP/IIOP for data communication. This permits a trade-off between performance predictability and reliability. Experimental results demonstrate that our architecture can achieve better performance and predictability than a real-time implementation of the CORBA Even Service when the out-of-band channel is employed for data communication it delivers better predictability with comparable performance when the ORB GIOP/IIOP is used.
  5. 서승호 1690
    PDF
    TINA-C에서 정의하고 있는 TINA 체계의 핵심 관리 기능인 연결관리 기능은 통신망 연결 서비스 즉, 연결의 설정, 변경, 그리고 해제 가능을 수행한다. 이는 통신망 사용자의 연결 요구를 처리하는 것은 물론이고, 장애관리가 장애 복구를 위하여 대체경로를 설정하거나 성능관리가 망의 부하 분산을 위하여 연결을 재 설정할 때에도 반드시 필요한 기반 관리 가능이다. 이와 갇은 연결관리 기능에는 연결 요구에 가장 적합한 경로를 계산해 내는 경로 설정 기법이 반드시 필요하다. 본 논문은 이와 같은 TINA 연결관리 기능에 필수적인 경로 설정 기법을 제안한다. 또한 제안된 경로 설정 가법의 구현 방안과 구현 결과를 나다내고, 그 성능을 분석한다.
  6. 윤양훈 1701
    PDF
    본 연구에서 GaAs pHEMT와 도파관-마이크로스트립 변환구조를 이용하여 38 GHz 대역 하이브리드 전력증폭기 모듈이 개발되었다. 10 mil duroid 기판이 전력증폭가와 도파관-마이크로스트립 변환구조 제작에 사용되었다. 제작된 도파관-마이크로스트립 변환구조는 32 - 40 GHz 대역까지 약 I dB 삽입손실(back to back)의 측정 결과를 보였다. 전력증폭기 모듈의 측정 결과, 36.8 - 38.5 GHz에서 대략 출력 전력 29 dBm(P1.5 dB), 전력 이득은 7.2 dB, PAE 는 11.2 % 였다.
  7. 윤찬호 1707
    PDF
    We have proposed a tunable optical ADM using a fiber-optic transversal filter which is composed of fiber couplers and metal-film coated fiber-optic tapped delay-lines with a flat spectral response in abroad range of wavelength. Simulation results show that the optical loss at the DROP and PASS wavelengths of the OADM is negligible and the wavelength tunability is 0.78${\mu}{\textrm}{m}$/ps for the unit time delay of 2 ps. In order to investigate the effects of wavelength drift of the imput optical signal on the OADM the loss at the DROP port and the crosstalks to the other ports have been calculated. The maximum bit rates have been calculated at 46.26 Gb/s for the input Gaussian pulse width of 10 ps.
  8. 우대호 1714
    PDF
    In the mobile communication using DS-CDMA systems the problem of multiple user interference which reduce the performance is generated by multiple user access. In this paper to solve this problem we proposed the direct decision blind adaptive receiver with knowledge of only the desired user's spreading sequence. Simulation result present that the total user's power has equal gain The gain of signal to interference ratio for the proposed blind DD-LMS receiver has about 6[dB] than conventional receiver at additive white Gaussian noise and large gain at multipath channels. And when interference user's power has more large gain than desired user's power the gain of SIR for the proposed receiver has large value. And simulation result of bit error rate present that DD-LMS receiver has higher performance than LCCMA receiver. Thus the proposed blind DD-LMS receiver has robustness against interference of high power user and multipath channels.
  9. 김광수 1722
    PDF
    본 논문에서는 TDM 및 TDM/WDM 혼합형 광 ATM 스위치 구조에서 핵심 기능모듈인 광 셀 압축기와 역압축기를 새로이 제안하였다. 제안된 구조는 압축 및 역압축시 SOA 게이트와 광 궤환루프를 적용함으로써 구현을 위한 하드웨어를 줄였으며, 소수의 단을 직렬연결시 대용량의 광 펄스열을 압축 및 역압축할 수 있다. 제안된 광셀 압축기 구조를 이용한 4비트 단위 광 펄스 압축실험을 통해 시스템 적용을 구체화하였다.
  10. 정조훈 1732
    PDF
    In this paper a fixed-delay trellis search with decision feedback (FDTrS/DF) for high-density DVD systems (4.7-15GB) is proposed and implemented with FPGA. The proposed FDTrS/DF is derived by transforming the binary tree search structure into trellis search structure implying that FDTrS/DF performs better than the singnal detection techniques based on tree search structure such as FDTS/DF and SSD/DF. Advantages of FDTrS/DF are significant reductions in hardware complexity due to the unique structure of FDTrS composed of only one trellis stage requiring no traceback procedure usually implemented in the Viterbi detector. Also in this paper the PDFS/DF and SSD/DF orginally proposed for high-density magnetic recording systems are modified for the DVD system and compared with the proposed FDTrS/DF. In order to increase speed in the FPGA implementation the pipelining technique and absolute branch metric (instead of square branch metric) are applied. The proposed FDTrS/DF is shown to provide the best performance among various signal detection techniques such as PRML, DFE, FDTS/DF and SSD/DF even with a small hardware complexity.
  11. 홍진근 1744
    PDF
    In this paper a synchronized stream cryptosystem for secure link layer communication on a radio channel is designed. We have proposed new interleaving schemes to randomize a burst error and experimented with different types of interleaving schemes. The proposed techniques of interleaving schemes are : (1) interleaving scheme based on frame(2) interleaving scheme based on group. The proposed schemes are very robust in randomizing
  12. 민장기 1760
    PDF
    비동기 DS-CDMA 다중 사용자 환경의 이동통신 시스템에서 채널의 효율을 높이기 위해 학습 신호열을 사용하지 않는 블라인드 등화 기법을 제안한다. 블라인드 등화 기법 중에서 가장 단순하면서 성능이 좋고 구현하기 쉬운 CMA(Constant Modulus Algorithm)는 근거리-원거리 효과(near-far effect)가 심하게 나타날 경우 전력이 약한 사용자들의 수렴 영역이 작아져 mis-convergence 위험성이 증가한다. 이런 경우에도 Newton 방식을 이용한 등화 기법은 자승 오차와 Eye-Pattern의 성능 비교를 통해 기존의 방법 보다 우수함을 확인할 수 있었다.
  13. 신용조 1769
    PDF
    In this paper a new method is proposed to identify a modulation method in the case of unknown digitally modulated input signals. The proposed identification method is implemented with an artificial neural network which is based on characteristic feature extracted from the instantaneous amplitude the instantaneous phase and the instantaneous frequency of the input signals. The proposed method was simulated with 9 type signals (ASK2, FSK2, FSK4, PSK2, PSK4, PSK8, QAM8, QAM16) in a noisy communication environment. The results show that the artificial neural network can accurately recognize all kinds of patterns.
  14. 권오주 1777
    PDF
    본 논문에서는 최소의 하드웨어 요구사항으로 위성탑재용 고해상도 SAR의 광 대역 신호 생성 및 처리를 위한 스티칭(Chirp Stitching) 알고리듬과 이의 구현에 적합한 송.수신 부를 제안한다. 송신 부는 두 개의 협 대역 신호를 발생한 후 스티칭 기법을 사용, 협 대역보다 두 배의 주파수 대역폭을 갖는 광 대역 신호를 생성하며 수신부는 광 대역 신호 처리에 요구되는 데이터 고속처리의 어려움을 해결하기 위하여 송신 부에서 이루어진 방법을 역으로 처리하는 방법, 즉 광 대역 신호를 두 개의 협 대역 신호로 분리하여 저속으로 데이터를 처리하는 세그멘테이션 방법을 적용한다. 시뮬레이션을 통하여 100 MHz의 대역폭을 갖는 신호를 생성, 처리하였고 성능을 평가함으로써 제안된 스티칭 알고리듬 및 송.수신부의 타당성을 입증하였다.부의 타당성을 입증하였다.
  15. 장영범 1785
    PDF
    In this paper multi-rate non-recursive architecture for CIC(Cascaded Integrator-Comb) decimation filters with an arbitrary factor is proposed. The CIC filters are widely used in high speed wireless communication systems since they have multiplier-less and multi-rate low-power structure. Even conventional non-recursive CIC structure is multi-rate this architecture can be structured only in case of M-th power-of-two decimation factor. This paper proposes that muli-rate non-recursive CIC architecture can be structured with an any decimation factor of product form. Power consumption of the proposed architecture is compared with that of the conventional non-recursion architecture.
  16. 위정욱 1793
    PDF
    In this paper we propose an efficient implementation technique for cyclic extension in VDSL(Very High bit-rate Digital Subscriber Line) systems using Zipper duplexing and analyze its performances under typical telephone channel environments. In Zipper-based VDSL systems each DTM(discrete-multitone) block is appended by both cyclic prefix(CP) and cyclic suffix(CS). The CP is inserte to prevent both intersymbol interference (ISI) and iterchannel interference (ICI) while the CS is appended to ensure orthogonality between the upstream and downstream carriers thus preventing near-end crosstalk (NEXT). However in order to implement the CP in the transmitter side of the VDSL system an additional hardware is required to append the latter part of each DMT symbol to the beginning of the DMT symbol. In this paper we propose a VDSL system with Zipper duplexing using only CS to reduce hardware complexity (memory and processing delay) required for implementation of CP. It is shown by computer simulation that the proposed approach has the same capacity under typical channel environments as the previous Zipper-based VDSL system using both CP and CS. even with a significantly lower hardware complexity.
  17. Seo, Dong-Shin 1803
    PDF
    A new motion compensation method for ISAR is presented in this paper. It employs amplitude limiting and integration of consecutive range profiles to improve the range and phase alignment accuracy and to alter the propagation properties of compensation errors. These allow the image quality to be significantly improved. It is shown from the imaging results that the new motion compensation algorithm can get images of targets in field situations with much better quality than the traditional cross-correlation algorithm.
  18. 권성근 1813
    PDF
    In this paper we proposed an efficient multiresolution motion estimation(MRME) algorithm using half-pixel accuracy motion estimation (HPAME) and characteristics of motion vectors in the baseband. Conventional MRME method needs exact motion vectors in the baseband because those are used as initial motion vectors in higher frequency subbands. Therefore the proposed method uses HPAME to estimate the motion vectors exactly in the baseband. Based on the characteristics of these motion vectors the motion vectors in the higher frequency subbands are selectively estimatied. That is motion vectors in the higher frequency subbands are estimated only for the blocks which have the half-pixel accuracy motion vectors in the baseband. In the proposed method by using HPAME in the baseband and selective motion estimation in the higher frequency subbands we can obtain reconstructed image with the similar quality with the conventional method though we reduce the computational complexity and the bit rate considerably.
  19. 이재수 1821
    PDF
    본 논문에서는 스테레오 물체추적 시스템의 새로운 접근 방법으로 영역기반의 정합인 SAD를 사용하여 복잡한 배경 및 전경에서 추적 물체를 인식하여 추출하고, 광 BPEJTC를 사용하여 주시각 및 카메라의 팬/틸트를 제어하는 실시간 스테레오 물체추적 시스템을 제안하였다. 본 논문에서 제안한 스테레오 물체 추적 시스템은 복잡한 배경 및 주위환경 변화에서도 추적 물체를 정확히 추출하여 적응적으로 스테레오 물체 추적이 가능함을 실험을 통해 확인하였으며, 광학적으로 구성함으로써 스테레오 자동 물체 추적기의 실시간적 구현 가능성을 제시하였다.
  20. 강태하 1832
    PDF
    The error diffusion algorithm is good for reproducing continuous images to binary images. However the reproduction of edge characteristics is weak in power spectrum an analysis of display error. In this paper an edge enhanced error diffusion method is proposed to improve the edge characteristic enhancement. Spatial gradient information in original image is adapted for edge enhance in threshold modulation of error diffusion. First the horizontal and vertical second order differential values are obtained from the gradient of peripheral pixels(3x3) in original image. second weighting function is composed by function including absolute value and sign of second order differential values. The proposed method presents a good visual results which edge characteristics is enhanced. The performance of the proposed method is compared with that of the conventional edge enhanced error diffusion by measuring the edge correlation and the local average accordance over a range of viewing distances and the RAPSD of display error.