사보니스 4익 풍차의 크기에 따른 토크, 회전수, 동력을 각기 다른 풍속에서 측정하였으며 열변환조의 회전수를 증가시키기 위하여 중속기어를 부착하여 풍력의 열변환시험을 하였다. 기어비 1:18 까지 증가시켜 로타의 회전수를 최고 180rpm으로 증가시켰지만 열변환능력은 크게 개선되지 않았다. 풍차의 크기와 동력의 관계에 관한 심층적 이론분석이 필요할 것으로 판단된다.

This paper presents the combustion characteristics of hydrocarbon fuel from a conventional pressureswirl nozzle of a small-scale burner. The nozzle has orifice diameters of 0.256 mm and liquid flow rates raging from 50 to 64 mL/min were selected for the experiments. The furnace temperature distribution along the axial distance, the gas emission such as CO, $CO_2,\;NOx,\;S0_2,$ flue gas temperature, and combustion efficiency were studied. The local furnace and flue gas temperatures decreased with an increase in air velocity. At injection pressures of 1.1 and 1.3 MPa the maximum furnace temperatures occurred closer to the burner exit, at an axial distance of 242 mm from the diffuser tip. The CO and $CO_2$ concentrations decreased with an increase in air velocity, but they increased with an increase in injection pressure. The effect of air velocity on NOx was not clearly seen at low injection pressures, but at injection pressure of 1.3 MPa it decreased with an increase in air velocity. The effect of air velocity $SO_2$ concentration level is not well understood. The combustion efficiency decreased with an increase in air velocity but it increased with an increase in injection pressure. It is recommended that injection pressure less than 0.9 MPa with air velocity not above 8.0 m/s would be suitable for this burner.