Factors influencing penetration kinetics of PVAm solution into paper were investigated with ultrasonic Penetration Evenness Analyzer (PEA). Paper structure was varied by changing basis weight, freeness of pulp, calendering, number of plies and filler addition and hydrophobicity of paper was varied by adding AKD. Important factors affecting liquid penetration are found to be pore structure and hydrophobicity of paper. Pore structure of paper can be designed by controlling refining degree and filler addition. Hydrophobicity of paper can be controlled by internal sizing.

나노 크기의 물질 및 공정 개발 또는 나노스케일에서의 분석 등에 대한 기술을 통칭하여 나노기술이라 부른다. 나노기술은 최근 다양한 산업에 새로운 먹거리를 제공할 수 있을 것이라는 기대감과 함께 관심이 급증되고 있다. 전통적 굴뚝 산업이라 할 수 있는 제지 산업에 대한 나노기술의 적용은 매우 요원하고 상관없는 듯이 보이지만, 한편 습부화학 또는 잉크젯 용지 생산에서 사용하는 실리카는 나노기술을 이미 적용하고 있는 사례이며, 이 외에도 나노기술은 펄프, 제지산업의 새로운 먹거리 개발에 활용될 수 있는 여지가 많다. 본 발표에서는 펄프, 제지산업에 대한 나노기술의 적용 사례를 살펴보고, 새로운 제품 및 물질 개발을 위한 그 가능성을 살펴보고자 하였다.

산림자원의 부족현상이 갈수록 심화됨에 따라, 재활용폐지를 원료로 활용하는 비율이 증가되고 있으며, 재활용 폐지의 품질도 지속적으로 악화되어 제지 환경이 점점 어려워지고 있다. 이에 최근에 개발되어 지대지, 라이너 판지등에 적용하여 강도상승 목적으로 사용중인 호프만계 폴라비닐아민에 대한 성능평가 결과를 고찰하고자한다. 호프만계 폴리비닐아민의 가장 큰 장점은 투입량을 증량하여도 종이의 Formation에 악영향을 마치지 않고 효과적으로 내절도, 파열강도등 강도적 적성이 향상되므로 응용 범위가 점차 확대되고 있다. 이와 더불어 제지환경이 점점 어려워짐에 따라, 보류 및 탈수 향상등 제지 공정개선제로 많이 사용되는 파우더 및 에멀젼의 성능 고도화가 절실히 요구되고 있으며, OCI-SNF의 개선 사례를 살펴보고자한다.

The annals of Joseon Dynasty has been known as one of the UNESCO's Memory of the World Heritage. Some of the annals of Joseon Dynasty was composed with wax coated book. Especially the waxed book have been severely damaged by various reason. To find out the safety preservation method of the annals of Joseon Dynasty waxed book, the characteristics of reinforced dewaxed Hanji was evaluated in this paper. From strength properties of MC treated dewaxed Hanji after dewaxing with different method, dewaxing ratio was been high, polymer treated dew axed Hanji showed a better strength. As the aging time, polymer layer on dewaxed Hanji was became brittle and cracked.

Current fuel ethanol research and development deals with process engineering trends for improving biotechnological production of ethanol. Recently, a large amount of studies regarding the utilization of lignocellulosic biomass as a good feedstock for producing fuel ethanol is being carried out worldwide. The plant biomass is mainly composed of cellulose, hemicellulose and lignin. The main challenge in the conversion of biomass into ethanol is the complex, rigid and harsh structures which require efficient process and cost effective to break down. The isolation of microorganisms is one of the means for obtaining enzymes with properties suitable for industrial applications. For these reasons, crude cultures containing cellulosic biomass degrading microorganisms were isolated from rice field soil, cow farm soil and rotten rice straw from cow farm. Carboxymethyl cellulose (CMC), xylan and Avicel (microcrystalline cellulose) degradation zone of clearance on agar platefrom rice field soil resulted approximately at 25 mm, 24 mm and 22 mm respectively. As for cow farm soil, CMC, xylan and Avicel degradation clearancezone on agar plate resulted around at 24mm, 23mm and 21 mm respectively. Rotten rice straw from cow farm also resulted for CMC, xylan and Avicel degradation zone almost at 24 mm, 23 mm and 22 mm respectively. The objective of this study is to isolatebiomass degrading microbial strains having good efficiency in cellulose hydrolysis and observed the effects of different substrates (CMC, xylan and Avicel) on the production of cellulase enzymes (endo-glucanase, exo-glucanase, cellobiase, xylanase and avicelase) for producing low cost biofuel from cellulosic materials.

Proton-NMR spectroscopic method was applied to kinetics study of concentrated sulfuric acid hydrolysis reaction. Xylan was used as model compounds. Without neutralization steps in proton-NMR methods, this analysis method is valid for analysis of xylose, furfural and formic acid in acid hydrolyzates.

The experiment was conducted to evaluate the different NaOH pretreatment concentrations (0.25%, 0.50%, 0.75%, and 1.00%) on enzymatic saccharification (with cellulase, and ${\beta}$-glucosidase) and fermentation (by Saccharomyces cerevisiaeKCCM 11304) for bioethanol production from rice straw and rice husk. Pretreatment of rice straw and rice husk were conducted under both natural and powder state to observe the potentiality of the biomass condition (natural and powder state). In this study, glucose and ethanol production were increased with the increase of NaOH percentage for both rice straw and rice husk (natural and powder state). For rice straw, the highest amount of glucose was obtained in 1.00% NaOH pretreatment (0.81 g $g^{-1}$ in a natural, and 0.63 g $g^{-1}$ in a powder state pretreatment). Similarly, for rice husk, the highest amount of glucose was obtained in 1.00% NaOH pretreatment (0.47 g $g^{-1}$ in a natural, and 0.46 g $g^{-1}$ in a powder state pretreatment). However, 0.75% NaOH pretreatment resulted in glucose yield near about 1.00% NaOH pretreatment for both rice straw and rice husk (natural and powder state). On the other hand, for rice straw, the highest amount of ethanol was obtained in 1.00% NaOH pretreatment (0.36 g $g^{-1}$ in a natural, and 0.31 g $g^{-1}$ in a powder state pretreatment). In addition, for rice husk, the highest amount of ethanol was also obtained in 1.00% NaOH pretreatment (0.24 g $g^{-1}$ in a natural, and 0.23 g $g^{-1}$ in a powder state pretreatment). Moreover, 0.75% NaOH pretreatment resulted in ethanol yield near about 1.00% NaOH pretreatment for both rice straw and rice husk (natural and powder state). It was confirmed that higher amount of NaOH use is cost effective. Moreover, higher amount of glucose and ethanol was observed when powder was prepared after pretreatment. So 0.75% NaOH pretreatment in a natural state is supposed to be suitable for enzymatic saccharification and fermentation for bioethanol production.

표면사이정 기술은 액체의 침투 저항성을 확보하고 표면 특성을 향상시키기 위하여 제지 공정에서 널리 사용되고 있으며， 특히 산업용지의 경우 전분 호액을 사이징액으로 사용하는 표면사이징 기술을 적용하여 표면에 도포된 전분 호액이 지필 내부로 침투하여 인장강도，RCT， SCT， 내부결합강도 등을 향상시키는 효과도 기대하게 된다. 종이는 섬유의 네트워크 구조로 이루어져 있으므로 지필에 대한 액상 물질의 주요 침투 기작은 모세관력에 의한 섬유 간극 내 침투의 형태를 보이며, 침투 정도는 지필의 특성과 전분 호액의 특성에 영향을 받는다. 사이징액이 지필에 침투되는 정도가 높아지면 상대적으로 종이 표면에 남는 전분의 양이 줄어들어 액체의 침투 저항성이나 표면 특성이 최초 기대했던 수준보다 낮아질 가능성이 있다. 사이징액을 구성하는 전분의 특성에 따른 지필 내 침투 정도와 이에 따라 발현되는 효과를 파악하기 위하여 본 연구는 라이너지를 대상으로 하여 표면사이징용 전분의 특성에 따른 침투특성의 변화에 초점을 두고 진행되었다.

Currently, many forest residues have been generated by the National Forest Management Operation. Unfortunately, most of the forest residues are supposed to be used as raw materials for burning fuels like wood pellets. Even though the forest biomass must be effectively used for making high value-added products, they may be subject to disposable raw materials for wood pellets. Wood pellets are regarded as burning fuels with less contribution to the decrease in carbon gas emission, compared to raw materials for kraft pulps. In this study, we studied whether or not forest biomass mixed with various ages and, species could be used as raw materials for kraft pulps.

The effects of the high pressure and the high temperature digesting process with water on the properties of rice hull were investigated in this work. Two temperature condition such as $160^{\circ}C$ and $180^{\circ}C$ and thee treatment time such as 15 min, 30 min and 45 min were applied for this treatment. The pH of extract after the digestion process decreased as the temperature and the treatment time of the digestion were increased. The ash content and lignin content were not decreased by the the digestion. The structure of rice hull after digestion treatment became more weak, the better efficiency of the fiberization with PFI-Mill was shown for the digestion treated rice hull with the higher temperature and the longer treatment time.

Xylans are polysaccharides present in large amounts in cell walls of land plants. However, during kraft cooking, a high portion of hemicelluloses including xylans are dissolved in the cooking liquor. In the current trend for a more effective utilization of biomass, attention has been paid to the exploitation of xylans as strength-enhancing additives for paper. It is believed that surface xylan adds flexibility to the cell wall/fiber surface, resulting in stronger fiber-fiber joints or greater contact area between the fibers. Accordingly, there is proposal for a new pulping process involving the extraction of xylan prior to pulping, followed by their re-adsorption on the unbleached pulp. A suitable bleaching process should be employed then, which ought to does not only improve the brightness of the pulp, but also remain the effect of the adsorption of xylan on pulp fibers. The objective of this research was to investigate the impact of hydrogen peroxide bleaching on the properties of unbleached hardwood kraft pulp pretreated with birchwood xylan by measuring optical properties (brightness, post color number, opacity) as well as physical properties (tensile index, tearing index, bulk) of handsheets made from the bleached pulp. In the meantime, the influence of process variables of peroxide bleaching including bleaching temperature, time, initial pH and $MgSO_4$ dosage were studied.

During the last decades, global warming from the increased amount of greenhouse gases, mainly carbon dioxide has become a major political and scientific issue. Burning fossil fuels (natural gas, coal and oil) releases $CO_2$, which is also a major cause of global warming. Among the clean environment, wood pellets are considered as promising renewable fossil fuels because of clean burning characteristics, reduction of particulate and NOx emission from combustion. In Korea, more than 50% pellets have to be imported every year because of shortage of feedstocks. On the other hand, about 80% of wood pulps are greatly dependent upon overseas products due to limited forest resources. Under this situation, this study explored how efficiently we have to use forest biomass instead of total dependence on wood as raw materials for pellets.

Effects of thermal aging on color variations of various papers were evaluated. With thermal aging, most of papers showed a special trend in $a^*$-$b^*$ plane: $a^*$ (red-green) values of the samples were reduced at beginning and after a turning point it was increased while $b^*$ (blue-yellow) was kept increased (yellowing of paper). In case of filter paper which consists of chemical pulps, the changes in $a^*$ value was occurred late compared with other samples. In case of the copy paper with optical brightening agent, the turning point in $a^*$ was not observed while a constant increase in $b^*$ was observed. In case of color paper, no specific trends in $a^*$-$b^*$ were found.

In the world, burning fossil fuels such as oil, petroleum, gasoline has created the global warming due to especially carbon dioxide gas emission. Therefore, these fossil fuels must be replaced by eco-friendly feadstocks. The wood pellets are one of valuable alternative fuels that can replace oil-based fuels within a short period of time. Unfortunately, there are no enough forest biomass for wood pellets in Korea. Nevertheless, Korea government has been trying to use most of forest biomass generated from the National Forest Management Operation. This does not make sense in an economic point of view.

This study was carried out in order to investigate the effect of pre-coating layer on top-coating layer. The coated paper with five different formulations were prepared. The properties of coated paper were measured and correlation between pre and top-coated layer was evaluated. Paper gloss was increased with addition of clay and GCC that has smaller particle size. Roughness was decreased with using smaller particle GCC, clay and talc. The highest thickness was obtained with talc. Brightness and whiteness of pre-coated layer were affected to top-coated layer. GCC 60 shows the highest and ununiform water adsorption during 1sec. The adsorption was higher with increasing coated weight. Talc shows the excellent water adsorption properties due to its wettability. These results indicate that final printability and properties of top coating layer can be controlled with adjusting pre-coating layer.

Hanji(Korean traditional paper) is made from bark of paper mulberry(Broussonetia kazinoki). For a long time, Hanji has been used in various fields, such as paintings, printing paper, as specialty paper. The utilization of Hanji will become more and more diverse. One of the characteristic properties of Hanji is a long life time comparing to western paper. The mucilage which must be used in Hanji manufacturing should effect the conservation properties of Hanji. The effectiveness of the mucilage in aging of Hanji was evaluated in this paper. Strength properties of thermal aged Hanji made with synthetic mucilage decreased more slowly than those of Hanji made with natural mucilage. As prolonged aging time, all Hanji made mucilage increased oxidation index. But, Hanji made with PAM was most stable in oxidation of cellulose.

This study was carried in order to manufacture the high quality coated paper. High quality includes not only properties of coated paper but also final print quality. In this study, new acrylic-styrene emulsion was polymerized in laboratory and compared with styrene-butadiene latex. Low-shear viscosity of coating color was decreased with increasing acrylic-emulsion dosage. WRV was increased with addition and decreased with substitution of acrylic-emulsion. Paper gloss, brightness and whiteness were increased and PPS and opacity was slightly decreased with acrylic-emulsion. Ink gloss was increased with using No. 3 acrylic-emulsion due to lower ink setting properties. However No.1, 2 emulsion shows opposite situation. Surface strength of coated paper was increased with using No. 3 acrylic-emulsion These results indicate that high quality coated paper can be manufactured with using No. 3 acrylic-emulsion.

This study was carried out in order to manufacture the high quality coated paper. High quality coated paper includes not only present state but also the state of the future. So in this study, acrylic-styrene emulsion which polymerized in laboratory was compared with SB(Styrene-butadiene) latex during thermal aging. The coated paper with three different formulations which controlled the dosage of acrylic-styrene emulsion were prepared. The coated paper were thermally aged at $105^{\circ}C$ for 18days and the optical properties were measured. Brightness, whiteness and CIE L value were higher during thermal aging with increasing amount of acrylic-styrene emulsion. CIE $a^*$ value was higher and CIE $b^*$ value decreased with increasing amount of acrylic-styrene emulsion. These results indicate that high quality coated paper which has anti -thermal aging property can be manufactured with acrylic-styrene emulsion.