Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference (한국조명전기설비학회:학술대회논문집)
The Korean Institute of IIIuminating and Electrical Installation Engineers
- 기타
Domain
- Electricity/Electronics > Home/Electric Appliances
2005.11a
-
청계천의 경관조명은 하천을 가로지르는 다리 22개를 비롯하여 다양한 경관요소에 대하여 주변경관에 알맞는 경관조명으로 청계천의 특성을 부각시키고 있다. 특히 수변공간의 경관에서 큰 비중을 차지하고 있는 교량의 경관조명이 야간 청계천 경관의 아름다움을 좌우한다고 할 수 있다. 다양한 구조형태 및 특징을 가진 22개의 교량은 특색에 맞는 조명연출로 인지도를 주어 보행자로 하여금 청계천에 대한 방향감 및 공간감을 제공한다. 따라서 본 연구의 목적은 청계천 교량의 경관조명 효과를 분석하는 것이다 이를 위하여 청계천 8개의 교량을 대상으로 휘도, 색온도, 색도분포를 측정하였으며 측정 결과는 다음과 같다. 오피스 지역에 위치해 있는 교량은 배경과 교량의 휘도대비가 시각적으로 명확성이 좋은 것으로 나타났으며 색온도는 차가운 느낌과 따뜻한 느낌의 조명이 조화를 이루며 교량의 온열감을 표현하는 것으로 나타났다. 상업지역에 위치해 있는 교량의 경우 오피스 지역의 교량보다는 휘도대비가 작게 나타났지만 시각적 측면에서는 효과가 있는 것으로 나타났다. 색온도는 안정감 있는 느낌을 주는 것으로 나타났다. 주거지역에 위치해 있는 교량의 경우 교량자체의 휘도평균은 낮게 나타나 주변 환경을 고려하여 밝지 않게 조명된 것으로 판단된다. 전체적으로 청계천 교량의 경관조명 특성은 교량의 주변 환경에 따라 다른 효과가 연출된 것으로 나타났다.
-
Luminous Characteristics of Cheonggyecheon(stream)'s Essential Elements during the Day and the Night본 연구는 청계천의 구성요소에 대해 경관연출효과를 분석하기 위해 주요구성요소 4곳을 상대로 경관현황을 조사하였다. 도시에서의 빛연출은 도시의 아이덴티티를 형성하고 또한 청계천 같이 6km에 다다른 하천은 관광자원으로써도 활용된다. 따라서 청계천 빛환경을 분석하기 위해 경관에 있어서 조명학적으로 중요한 물리량 평가요소로 휘도, 색도, 색온도를 선정하였다. 디지털 광학 계측기인 Radiant Imaging Prometric 1400에 의해 측정된 휘도, 색도, 색온도 등의 물리량 측정결과 주야간 모두 주변과 조화를 이루고 있는 것으로 나타났으며, 휘도대비가 16:1을 넘지 않아 시각적으로도 적절한 것으로 판단됐다. 따라서 청계천 주요수성요소의 경관연출은 주 야간 모두 이용자들에게 안락한 경관을 제공할 것으로 사려된다.
-
Full-HDTV급 PDP를 구현하기 위해서는 고속 어드레스 구동이 필요하며 이러한 기술은 AWD 구동방식으로 구현하는 것이 용이하다. AWD 구동방식은 하나의 sustain 펄스 휴지기안에 복수개의 scan 펄스를 설치하는 것이 바람직하며 이 경우 sustain 펄스와 sustain 펄스 사이가 넓어진다. 본 연구에서는 이 휴지기를 고려한 sustain 방전특성을 해석하였다. 실험결과 address 바로 다음에 나오는 첫 번째 sustain 펄스는 공간전하 의존도가 높으며 두 번째 펄스부터는 공간전하 의존도보다는 벽전하 의존도가 더 높다는 사실을 알았다. 또한 수십
${\mu}s$ 를 가지는 휴지기간에도 균일한 sustain 동작마진을 얻을 수 있음을 알았다. -
2005년 10월 서울시는 47년 만에 청계천을 약 5.8km 구간에 걸쳐 정비하여 서울중심에 새로운 물길을 열었다. 청계천의 경관조명은 청계천의 남북을 이어주는 22개의 다리, 청계천을 동서로 가로지르는 산책로를 비롯하여 다양한 청계천 주변 요소에 청계천을 이용하는 보행자들을 위한 경관조명을 복원되는 전 구간(5.8km)에 약40억을 들여 설치하였다. 이중 산책로는 보행자가 가장 많이 이용하는 요소이며, 청계천의 주변 경관에 다채로운 야경을 연출하여 청계천에 아이덴티티와 방향성을 지니게 하고 야간에 산책로를 이용하는 보행자들에게 즐거움과 여유로움을 주고 있다. 이에 본 연구는 도심내 수변가로로 대표되는 청계천 산책로를 대상으로 조명환경의 특성을 분석하였다. 이를 위하여 산책로에 대하여 수평면조도를 측정하고 기준값과 비교하였다. 조도의 특성을 분석한 결과 청계광장 산책로 입구, 광통교 밑부분, 산책로와 연결되는 4곳의 계단 등이 KS기준조도와 비교하여 부족한 것으로 나타났다. 산책로의 경우 수평면조도에 문제가 없는 것으로 분석되었지만 주거지역의 경우에만 일부분 기준조도에 비해 부족한 것으로 나타났다.
-
최근 복원된 청계천의 야간경간조명은 야간에 도심의 새로운 미관을 창출함으로써, 5.8Km에 이르는 체계적인 야간경관을 시각적으로 체험할 수 있는 공간의 역할을 하고 있다. 그러나 야간에 청계천의 수변산책로를 이용하는 사람에게는 문화유산, 휴식공간, 22개의 교량, 자연환경뿐만 아니라 지상건물이 시야 내에 존재한다. 특히 청계천 지상도로의 남북측면에 위치한 기존의 건물들은 청계천 복원과 관계없이 대부분 기존에 설치된 옥외조명을 사용하고 있다. 이에 본 연구는 청계천 수변공간 산책시 사람의 시야내에 나타나는 지상건물의 조명환경특성을 분석하여 청계천변 조명과의 통합된 이미지가 연출되는지의 여부를 분석하는 것이 연구목적이다. 이를 위하여 지상에 위치하고 있는 건물을 대체적인 용도에 따라 오피스지역, 상업지역, 주거지역 등 3개 지역으로 구분하여 이 지역에 쥐치한 대표적인 지상건물 표면의 휘도, 색온도, 색도를 측정하여 분석하였다. 조명학적 물리량을 분석한 결과, 지상에 위치한 건물들이 산책로를 이용하는 사람들의 시각환경에 영향을 미치는 것으로 나타났고 경관조명요소로서 지상건물의 조명환경을 적절히 보완해야 할 필요성이 나타났다.
-
Kim, Dong-Jo;Jo, Duk-Soo;Jeong, Yeon-Seong;Suk, Dae-Il;Jung, Seung-Kyun;Lee, Chang-Mo;Nam, Dong-Hun;Kim, Hoon 51
터널은 밝기가 급변하는 장소로서 자동차 운전자가 터널 진입 시 도로의 상황이나 교통상황을 정확히 파악하여 안전하고 불안감 없이 도로를 통행 할 수 있게 하여야 한다. 터널내의 충분한 노면휘도 유지를 위하여 터널내부의 조도를 정기적으로 측정하여야 하는데 기존의 수동식 측정법으로는 신속하고 신뢰적인 조도측정에 한계가 있다. 따라서 본 논문에서는 차량을 이용한 터널조도 및 휘도 측정시스템 개발과 함께 운용타당성에 대한 결과를 외국 사례와 함께 터널 실험을 통하여 결론을 도출하였다. -
자연채광은 실내공간의 쾌적성을 향상시키며, 재실자의 건강을 증진시킬 뿐만 아니라 에너지 절약적인 측면에서 시너지 효과를 발휘하고 있다. 이에 반사거울형 태양광채광시스템은 도시가 과밀하고 고층화됨에 따라 자연채광의 도입이 어려운 실내공간에 태양광을 도입할 수 있는 자연에너지 활용장치라 할 수 있다. 본 연구는 태양광채광시스템을 이용하여 주거건물 옥상에 1차반사거울을 설치하고, 반지하의 상부에 2차반사거울을 설치하여 거실공간에 태양광을 유입하였다. 시스템 미설치시와 설치시에 대한 거실의 바닥면조도와 외부조도를 동시에 측정하여 외부조도에 대한 내부조도의 비율인 주광조도비를 분석하고, 증감율을 구하여 반사거울형 태양광채광시스템의 성능을 평가하였다. 채광성능평가 결과 채광시스템의 설치로 인한 실내 주광조도비는 평균
$80{\sim}1,400%$ 정도 증가하는 것으로 나타났으며, 또한 창면부에 비해 실의 후면부가 2배 이상 증가한 것으로 나타나 채광성능이 매우 큰 것으로 나타났다. 따라서 본 연구에서 실험한 반사거울형 태양광 채광시스템은 주거건물에서의 적용이 용이하고 높은 채광성능을 제공할 수 있어 실내 빛환경 향상에 크게 기여할 수 있을 것으로 기대된다. -
A study to assess and show applications of the easy lighting constructions of the new technics has presented in this paper. we have taken the present men-power to determine the optimum levels of the selected labour cost and analysis of the unit prices on the new developed lighting device for modularized to unit length, named Lite-way.
-
자연채광 성능평가의 연구 방법으로는 현장측정, 축소모형실험, 수학적 알고리즘에 기초한 컴퓨터 시뮬레이션 등이 있다. 현장측정과 축소모형실험은 비교적 높은 신뢰도를 얻을 수 있는 방법이지만, 변화가 많은 자연광의 특성으로 인해 객관성 있는 측정결과를 얻는 것에 제한적이었다. 인공천공돔(Sky Simulator, Artificial Sky Dome)은 축소모형 실험 시 이러한 문제점의 보완을 위한 평가 시설이며 천공의 상태를 일관성 있게 조정함으로써 보다 객관성 있는 자연채광연구를 실시할 수 있다. 이에 따라 K대학에서는 직경 6[m], 높이 3.7[m]의 인공천공돔을 자체 개발 제작하여 연구에 사용하고 있다. 본 연구에서는 인공천공돔 기존사례에 대한 고찰과 이를 바탕으로 제작된 K대학 인공천공돔의 개요를 소개하고 기본적인 물리량 측정을 통해 인공천공돔의 신뢰성을 검증하고 유용성을 제시하였다.
-
본 연구에서는 서울시 한강에 위치한 교량을 대상으로 다양한 조망점에 따른 경관조명의 물리량을 측정하고 그 특성을 분석함으로써 동일한 연구대상에 대하여 조망점이 달라졌을 때 나타나는 물리적 변화를 통해 경관조명분야의 물리량평가방법론의 새로운 접근방법론을 제시하는 것이 목적이다. 이를 위하여 연구대상의 선정은 교량구조형식에 따라 분류하고. 경관조명이 설치된 교량 17개소 중 다양한 조망점과 현장측정의 편리성 등을 고려하여 광진교(거더교), 올림픽대교(사장교), 동작대교(트러스교), 동작대교(아치교)를 연구대상으로 선정하였다. 조망점은 한강둔치를 이용하는 방문객들이 바라보는 투시뷰, 교량주변 건축물에서 바라보는 건물뷰 그리고 교량 위를 이동하면서 바라보는 주행뷰로 구분하였다. 이러한 연구방법으로 도출된 결과는 동일한 경관조명연출을 토대로 교량별 조망점에 따른 휘도측정 및 분석에서 측정되는 각도, 거리, 방향에 따라 정형화된 비율은 아니지만 휘도값에 있어서 차이가 있다는 것을 확인 할 수 있었으며, 투시뷰와 건물뷰는 동일한 교량 구성요소를 갖고 있어 상호간 비교 분석이 가능하고 경관조명평가 요소로서 그 기능을 담당 할 수 있다고 판단되며, 주행뷰는 교량형식과 가로등의 영향을 많이 받으므로 평가요소로써 조망점을 활용하기에는 조금 더 깊은 연구가 선행되어야 할 것으로 보인다. 따라서 경관조명을 평가함에 있어 다양하게 바라보는 조망점은 조명연출로 인한 시각적 인식에 차이를 유발시킬 수 있어 경관조명을 평가할 때 다양한 조망점의 설정이 보다 객관적이고 정확한 분석이 가능할 것으로 판단된다.ridinium의 분포는 chlorophyll-a농도와 밀접한 관련성이 있었다. 담수적조의 현존량은 상류지역에서
$8.5\;{\times}\;10^3\;cell\;mL^L{-1}$ 로서 많았고, 댐부근의 하류지역($4.4\;{\times}\;10^2\;cell\;mL^L{-1}$ )으로 갈수록 감소하는 양상을 보였다. 또한, 담수적조의 원인종으로 규조류 Synedra acus와 남조류 Microcystis aeruginosa도 소량관찰되었다. 저수지의 수질 부영양화 현상은 기존 경사사면형 농경지를 기반으로 조성되었으므로 저층으로부터 풍부한 영양환경을 내재하고 있었고, 담수 초기에 발생할 수 있는 가능성을 포함하고 있었다. 또한 유입수량의 부족과 현재 수질개선을 위해 적용하고 있는 수중폭기시설등의 물리적인 영향도 직${\cdot}$ 간접적으로 작용하였을 것으로 추정되었다 따라서 향후 이에 대한 중장기적인 모니터링이 필요하였고 유역과 저수지의 통합적인 수질관리계획 이 요구되었다.group으로, 용존산소량, 전기전도도, pH, 인산염이 정점 3, 4, 5에서 같은 group으로 묶였다.유의적인 CAT 활성 증가효과가 나타났고, 간조직의 시토졸 1획분에서는 대조군 대비 15${\sim}$ 27%의 CAT 활성 증가효과가 인정되었다. 이상의 결과에서 목초액의 장기간 투여는 간조직 중의 활성산소의 억제효과뿐만 아니라 방어시스템으로서 활성산소 제거효소의 역할도 충실히 수행하여 노화를 효과적으로 예방하고 억제할 수 있을 것으로 기 -
이 논문은 자동차에서 제어 네트워크로 이미 신뢰성이 확인된 CAN(Controller Area Network) 필드버스를 산업계 복수전동기 제어에 적용하기 위하여 지능형 제어모듈로 CAN 이 내장된 DSP2812 프로세서를 이용하여 제어 및 모니터링기술을 개발하였다. 산업계에 광범위하게 사용되고 있는 유도전동기를 대상으로 여러 대의 유도전동기를 제어하기 위한 제어 알고리즘과 CAN기반제어네트워크 구축방법을 개발하였다. 이 시스템 성능을 평가하기 위하여 2대의 유도전동기 인버터 구동시스템에 적용하여 CAN 기반 네트워크 제어 실험을 수행하였다. 그 결과 광범위한 속도와 정역회전에서 실시간 네트워크 기반 제어성능을 확인하였다.
-
Today, the sciences in medical and nursing fields are becoming progressively more dependent on electrical apparatus for the preservation of life of hospitalized patients. Therefore, it is required more safety medical power distribution system in order to protect patients and physicians more securely from unexpected leakage of current. Especially for the medically used rooms which use life sustaining equipment, power should be provided as supplying continuously without interrupting with lowest leakage current. This thesis proposed the reason why Isolation Power System is safety through the circuit analysis and applications.
-
This paper presents a general proposal to design and calculate the performance of a tubular permanent magnet linear generator treated here on the basis of the Finite Element Method. Optimizing the linear generator dimensions reduces the cogging force, which occurs due to the interaction between stator teeth and the permanent magnets. The generated AC voltage is analyzed and evaluated for both no load and load cases to take the armature reaction effects on the air gap flux density. A repetitive routine is followed to calculate the output AC voltage from the change of flux and the speed of the single-phase linear generator. The AC output voltage is calculated for different resistive loads, and hence, the linear generator load characteristic is obtained. The designed linear generator is capable to generate an output power of 5.3kW with AC output voltage of 222V with an efficiency of 96.8% at full load of 23.8A. The full load current is chosen based on the thermal properties of the coil wire insulations.
-
This paper concerns developing a integrated online/offline light facility management system for light facility using internet and building a database system for control box and street light. Also, we designed the system to minimize the disparity with the conventional management system by referring to a old management ledger format. Thus, the proposed method may enable the system manager to administer the light facility efficiently and to reduce the manpower cost, and time economically.
-
This paper presents the reduction methods of penetrated electromagnetic fields through a narrow slot aperture in a planar conducting screen of infinite extent. When a plane wave is excited to the narrow slot, the aperture electric field is controlled by the resistive sheets loading on the slot. The magnitude of the penetrated electromagnetic fields through a narrow slot is controlled by electric field distributions on the slot aperture. The results show that the magnitude of the penetrated electromagnetic field can be effectively reduced by the resistive sheets on the slot aperture.
-
This paper presents a comparison of experimental value by hemispherical grounding simulation system and calculated value by CDEGS program for ground potential rise of structure. When a test current flowed through structure grounding electrodes, ground potential rise was measured and analyzed for types of structure using the hemispherical grounding simulation system in real time, and was computed by means of CDEGS program. The model structures were designed and fabricated with two types on a scale of one-one hundred sixty. When the experimental data were compared with the theoretical values, the similar profile was shown. Therefore, the confidence of measurement was obtained. The distributions of ground surface potential are dependent on the resistivity and absorption percentage in concrete attached to structure.
-
If obstacle in GIS(Gas Insulted Switchgear), its affects are great are on the community and it is consequently demanded lots of difficulities to recover and repair. Accordingly, diagnosis techniques, that are able to prevent from accidents before they happen by providing more stable and highly reliable power effectively and finding sign of the accidents is very important. A novel UHF(Ultra High Frequency)-microstrip antenna is presented. The measured impedance bandwidth of the proposed antenna is from 0.5[GHz] to 15[GHz] with the stop band from 0.5[GHz] to 10.7[GHz] for VSWR<2. Form results of this study, The antenna is will play an important role for the sensor for insulation diagnosis system by UHF method of real site GIS and power equipment using
$SF_6$ gas. -
The deregulation of energy market, together with structure reorganization of vertically integrated companies in electrical utility requires efficient and reliable substation automation system. The problem of non-standards where other countries suffer through the SA points could be settled using IEC 61850 and hereby the coming SAS project can realize the system that characterize the telecommunication standards and function integration.
-
This paper conducted to evaluate electrical continuity of steelworks within reinforced concrete apartment structures as the down conductor in external lightning protection system. The reinforcing bars in reinforced concrete structures can be used as the down conductor when their overall electrical resistance is not greater than the resistance value of 0.2 ohm between the uppermost part and the ground level. According to the results of electrical resistances measured by 4-terminal low resistance measurements, the steelworks in reinforced concretes structures exhibited the electrical continuity with low electrical resistance.
-
While everyone who uses electric power desires perfect frequency, voltage, stability, and reliability at all times, this cannot be realized in practice. The supplying utility cannot be expected to provide a perfect power supply because many of the causes of power supply disturbances are beyond the control of the utility. The outage happens but due to many reason. The electricity equipment requires consequently the emergency power supply. We classify the subordinate for quick supply of the emergency power supply and must grope the supply plan. We will find out in this paper through the case study about the emergency power efficient operation plan.
-
항로표지용 광파표지에는 등대, 등표, 도등, 조사등, 지향등, 등주, 교량등, 등부표, 등선 등이 있으며, 이 표지들은 사용용도, 형태 및 장소에 따라 제각기 다른 전원공급시스템을 가지고 있다. 일반적인 내부 전원공급시스템은 태양전지, 충방전조절기 및 축전지로 구성되어 있으나, 계속적인 사용으로 인해 문제점들이 자주 발생하고 있다. 설문조사 결과 전체 설문대상의 63%가 축전지의 개선이 가장 시급하다고 답하였으며, 다음으로 충방전조절기가 31%의 답변을 얻었다. 이와 더불어 현재 효율적인 표지의 관리를 위하여 집약관리시스템이 도입되고 있으나, 이에 따른 추가적인 전원공급의 문제, 축전지 및 기타 장치들의 설치의 문제 및 유지 보수의 문제 등이 크게 대두되고 있다.
-
어드레스-표시 동시 구동방식을 사용한 고속 구동기술을 개발하여 실험용 PDP에 적용하였다. 연구에서 주사 펄스의 폭과 주사 펄스와 첫 번째 서스테인 펄스 사이의 시간간격을 변화시키면서 어드레스 방전 특성을 측정하였다. 실험결과 이 고속 구동기술은 어드레스 방전의 벽전하 대신에 공간전하로 서스테인 방전을 유도한다는 것을 알았다. 그리고 12개의 서브필드를 가지며 1080개의 주사선을 가지는 full-HDTV급 PDP를 구동시킬 수 있는 조건을 만족하는
$0.7{\mu}s$ 수준의 주사 펄스폭과 20V의 어드레스 구동마진을 실현하였다. -
Fixed lighting of public ways for both vehicles and pedestrians can create a nighttime environment in which people see comfortably and can quickly and accurately identify objects on the roadway being travelled roadway lighting can improve traffic safety, achieve efficient traffic movement and promote the general use of the facility during darkness. The design of a roadway lighting system involves consideration of visibility, economics, esthetics, safety and environmental conditions. This paper describe estimation of horizontal illuminance by actual measurement at main streets in Jejusi. We try to evaluate Jejusi Roadway Lighting Conditions for modeling by computer simulation.
-
지금까지의 핵융합 장치는 자기우물과 열역학을 바탕으로 한 토카막 장치가 수소핵융합을 하였으나 고온의 플라스마를 장시간 동안 가둠이란 현실적으로 불가능하여 성공사례가 없었다. 본 핵융합 촉진 방법을 이용한 새로운 핵융합 장치는 토카막 장치의 토로이달 자기장용 알루미늄코일 내에 토러스 철심 C형 Core Block과 토로이달 알루미늄코일을 넣어 토로이달 자기장을 모으고 토로이달 전류 흐르도록 하여 토러스 Core의 일부가 절개된 간극사이에 핵융합로를 배치하고 융합원료(전해액)를 토로이달 전류로 전기분해 한다. 전원과 토로이달 자계용 코일, 토로이달 코일 융합원료로 직렬회로로 이루어져 있어 토로이달 전류는 필라멘트 전류로 되어 융합원료에 투입된다. 필라멘트 전류사이에는 자기흡입력이 외부의 입력전력으로 계속 증대되어 쿨롱에 힘을 넘어 핵융합에 이르고 그로인해 질량결손이 생겨 아인슈타인의 질량에너지
$(E=mC^2)$ 가 빛에너지와 열에너지로 방출됨을 확인했다. -
Electrodeless fluorescent lamps utilizing an inductively coupled plasma were found to have a long lifetime and high efficacy and now are used in some indoor and outdoor apllications. This paper gives a basic temperature data of ballast for electrodeless fluorescent lamp 'ULTRA'(E-Tech. ULTRA 150W). The experimental system consist of ULTRA 150W lamp and ULTRA Ballasts.
-
In this paper, we observed degradation characteristics of luminous flux for new light source. Because degradation tests can be a useful tool for assessing the reliability when few or even no failures are expected in a life tests. And we use a simple random coefficient degradation model to induce most suitable equation of degradation. As a result, exponential distribution and equation is best suitable model for new light source.
-
This study based on the experimental data on the daylight responsive dimming systems performance. The purpose of this study increases the energy-saving effects by reducing excessive intensity of radiation of artificial lighting through analyzing incident daylight. The photosensor sends amounts of detected luminous flux to digital control unit(DCU) as a signal and then, it can decide dimming ratios, by received a proper dimming signal from DCU. Generally it is effective to control artificial lighting with the different control ratio of each row by setting a photosensor as same numbers and rows as artificial lighting. However, it is ineffective to do in initial costs of systems aspect in offices. By analyzing the data of this performance and finding regular ration between photosensors. we will execute different dimming ratios to each row of artificial lighting by a single photosensor.
-
Outdoor lighting is an important factor of the urban scape. As a night image of the city, outdoor lighting acts important roles. Cities of developed countries have already had there own night images. Regarding this, government encourages outdoor lighting of building by various ways to building owners. However, in present, owners of private buildings have not been up and coming about outdoor lighting more than those of public buildings in our country. From this point of view, this paper suggests a quantification method for economic effects of outdoor lighting and analyzes economic effects of outdoor lighting in advertising. A suggested measurement method of economic effects is difficult to measure all economic effects of outdoor lighting. Therefore, this measurement method limits the target to the private buildings.
-
The daylight responsive dimming systems, which use daylight and automatically controls the brightness of electric lighting, according to the amount of daylight coming into the indoor, as well as always maintains target illuminance, is an energy saving type system. The control slope that decide the dimming percent for dimming ballast to run this system efficiently should be decided exactly. This research ran performance assessment applying daylight responsive dimming systems to actual space, and supplemented control slope in the sky condition for the elevation of system. Also we revaluated a system by modified control slope and compiled valid propriety and alternative for the elevation system.
-
We present the method to obtain four speckle patterns with relative phase shift of
${\pi}/2$ by passive devices such as wave plate and polarizer, and calculate the phase at each point of the speckle pattern in shearographic system using Wollaston prism. And, we analyzed the phase error caused using wave plates by Jones matrix. -
우리나라는 국토의 65% 이상이 산악지대로서 일반도로, 고속도로, 산업도로에서 터널이 차지하는 비중이 점차 증대되어지고 있다. 터널은 밝기가 급변하는 장소로서 자동차 운전자가 터널 진입 시 도로의 상황이나 교통상황을 정확히 파악하여 안전하고 불안감 없이 도로를 통행 할 수 있게 하여야 한다. 터널내의 충분한 노면휘도 유지를 위하여 터널내부의 조도를 정기적으로 측정하여야 하는데 기존의 수동식 측정법으로는 신속하고 신뢰적인 조도측정에 한계가 있다. 따라서 본 논문에서는 차량을 이용한 측정시스템을 이용하여 터널조도 및 휘도를 측정하고 그 실측값을 분석하였다.
-
도로조명은 야간에 운전자에게 안락함과 안전한 운행을 도울 수 있도록 설치가 이루어져야한다. 최근 늘어나는 자가용에 의해서 주택가나 공공장소에 발생하는 소음을 감소시키기 위하여 도로 위 필요지점들에 방음벽이 설치되어지고 있다. 그러나 현재 이에 적합한 형태의 조명기구가 개발되지 못한 상황이며, 이에 따라서 방음벽에 설치가 가능한 도로조명기구의 반사판을 개발하였다. 개발된 반사판은 도로에 대해 연직방향으로 위치한 방음벽에 그대로 설치되어질 수 있는 형태이며, 도로조명기준에 맞추어 전반 균제도 0.4와 차선 축 균제도 0.7 이상을 만족할 수 있도록 설계되었고, 단위 면적당 소비전력
$1.18[W/m^2]$ 의 효과를 얻었다. -
각종 규정에 정의되어있는 전조등의 성능과 시험 방법에 따라서 전방의 장해물 식별에 장애가 되지 않는 정도의 전조등 밝기 변화 허용치가 어느 정도로 될 것인지를 평가하기 위하여, 휘도 계수를 계산하고 이것을 사용하여 운전자의 순응휘도를 결정하였다. 그리고 운전자의 시인성 측정을 위한 시험실 설계를 하고 실험실 공사를 완료하였다. 향 후 운전자의 시인성 및 심리/생리적 측정을 통하여 전조등 밝기 변화에 대한 한계치를 규정할 것이다.
-
Recently, energy depleting problem have risen seriously. Many studies of daylight responsive dimming system for saving of lighting energy in office buildings have been done actively. Most of studies are focused on the accuracy. However if the variation of dimming levels is changed too often, occupants would feel uncomfortable. First, illuminance changes which occupants couldn't detect are studied through analyzing foreign studies. Second, workplan illuminance from daylight in each sky condition is measured. Because the dimming level In daylight responsive dimming system is dependent on the workplan illuminance from daylight. In conclusion, the most appropriate polling periods to daylight responsive dimming system for occupant's visual comfort was determined.
-
박물관에 전시된 유물의 관람을 위해서는 조명이 요구되며, 조명에서 제공되는 가시광선, 자외선 및 자외선에 의해 손상을 입을 수 있다. 조명에 의한 손상을 방지하기 위해서 손상의 원인을 완벽히 제거한다는 것은 기술적, 실용적으로 쉽지가 않다. 따라서 손상의 원인을 완벽히 제거하기보다는 적절한 조명기준 등을 정하여 손상의 최소화를 위한 노력이 실질적인 수단이라 생각된다. 본 연구에서는 우리나라 중앙박물관의 박물관의 전시조명기준에 의거한 유물의 등급별 적산조도 등의 설정 기준에 따른 적용방법과 유지관리 방안 등을 제안하였다.
-
본 연구에서는 프랜트 및 빌딩자동제어 분야에서 적용이 확대되고 있는 LonWorks 필드버스를 이용하여 기존의 공기조화 시스템를 제어하고 있는 DDC제어기를 대체할 수 있도록 필드버스에서 사용이 가능한 고성능 저가의 지능형 제어모듈을 개발하였다. 이는 필드버스 기반의 AHU 전용 지능형제어기를 새로운 설계기술로 개발하고 상품화를 실현하였다. 특히 S/W부분에서도 8 bit Neuron chip에 매우 콤팩트하게 내재된 고성능 응용프로그램도 개발하였다. 또한 Echelon 사의 iLON 100 server의 Soap/XML을 사용하여 Web 브라우저에서 쉽게 프로그램을 작성 제어모니터링 기법을 개발하였다. 공조기의 실험시스템을 구축하여 개발된 전용 제어기 및 Web 기반제어를 실험한 결과 밸브, 댐퍼제어 및 감시기능이 기존 DDC 제어기보다 우수함을 확인하였으며 원격제어 기반을 구축하였다.
-
It is increased electrical energy consumption with the development of intelligence society in the general hospitals and thus an energy conservation through efficient use of electricity became more important. This paper shows a reasonable design demand factor in office buildings, that was made by the systematic and statistical way considering actual conditions, such as investigated electric equipment capacity, peak power consumption, demand factor, etc., for 32 general hospitals and 9 electrical design offices. In this dissertation, it is necessary to analyse the key features and general trend from the investigated data. It made an analysis of the feature parameters, such as average, standard deviation, median, maximum, minimun and thus it was carried linear and nonlinear regression analysis.
-
불특정 다수의 사람들이 이용하고 있는 찜질방은 업소의 특성에 적합한 시설기준이 미비한 상태이므로 언제든지 감전사고와 같은 안전사고의 위험이 도사리고 있다. 본 논문에서는 찜질방의 전기설비와 관련된 국내 외 시설규정을 참고하여 실제 적용 가능한 시설기준을 제시하고, 현장실태조사 결과를 분석하여 나타난 문제점을 파악하고 점검, 유지 및 관리에 있어서의 착안 사항을 제시하고자 한다.
-
This paper describes a boost converter cascaded high frequency link direct dc-ac converter suitable for fuel cell power sources. A new multi-loop control for a boost converter to reduce the low frequency input current harmonics drawn from fuel cell is proposed. A new PWM technique for the cycloconverter at the secondary to reject the low order harmonics in the output voltages is presented in detail.
-
This paper proposes a new soft switching technique for a phase-shift controlled bi-directional DC-DC converter. The described converter employs a low profile high frequency transformer and two active full-bridge converters for bidirectional power flow capability. A new soft switching technique is proposed, which guarantees soft switching over wide range (no load to full load) without any additional circuit components. In the proposed switching scheme, the switch pairs in the diagonal position of the converter each are turned on/off simultaneously by the switching signals with a variable duty ratio depending on the phase shift amount, and the converter is operated without freewheeling interval.
-
In recent years the developments of the society in information technology so the building is required protective earthing to prevent electric shock and the building is also required functional earthing to guarantee safe operation of dispatch instrument of information. This paper is reviewed about an estimation of earthing resistance that is considered the shape and size of the plate electrode in order to do practical use as earthing electrode of foundation the plate electrode in the foundation of building.
-
This paper presents the potential interferences between various grounding electrodes. The ground potential rise and potential interference coefficient between grounding grid and ground rod were calculated. The potential rise and potential interference coefficient strongly depend on the distance between grounding electrodes.
-
Surge protective devices can be divided into three categories based on the circuit assembly: a parallel circuit type that considers the surge current amount within the device, a series circuit type that considers the voltage and single circuit type that uses a single element. However, when assembling SPDs, there are many things including function and safety to be taken into consideration because they are directly related to the performance and safety of the device. In this paper, we executed an experimental comparative study of performance and thermal stability of each SPD type using lightning surge generator and thermal image camera.
-
In order to carnation productivity improvement, ozonizer and negative ionizer has been designed and manufactured. The ozone is generated by DC positive streamer discharge and the negative ion is generated by DC negative discharge. When the ozone and negative ion are supplied growth room and farm to carnation cultivation, the carnation productivity is improved.
-
Effects of injected number and amplitude of
$8/20{\mu}s$ impulse current on the life of ZnO varistorThis paper presents leakage current characteristics as a function of injected number and magnitude of impulse current, when$8/20{\mu}s$ lightning impulse current is injected to ZnO varistor. The life of ZnO varistor against$8/20{\mu}s$ lightning impulse current was evaluated. The injected number of the test current to breakdown was inversely proportional to the amplitude of impulse current. -
This paper deals with the parametric analysis of electric and magnetic fields generated by lightning discharges. The measuring system consisted of the plate-type electric field and loop-type magnetic field sensor, the voltage follower, the active integrator and LabVIEW software. The parameters of the electric and magnetic field waveforms produced by intracloud lightning strokes were presented.
-
현재 국내 외에서 GIS용 광 CT가 활발히 연구 개발되고 있다. 이러한 광 CT는 전류와 온도의 변화에 따른 오차가 발생하는데 온도특성을 고려하여 온도변화에 따른 출력신호의 오차를 감소시키고 전류를 더욱 정밀하고 안정적으로 측정 가능하도록 온도보상 시스템이 필요하다. 본 논문에서는 온도보상 시스템 연구를 위한 광 CT의 온도보상 특성에 대한 연구 계획을 기술하였다.
-
본 연구는 페러데이 효과(Faraday Effect)를 이용한 GIS용 광 CT의 개발을 위하여 출력신호의 정밀성과 안정성 향상을 위한 신호분석 시스템에 대해 검토하였다. 기존 광 CT의 Verdet 상수 의존도와 온도에 따른 특성 및 노이즈에 대한 정밀성을 개선하기 위해 신호처리 시스템 이용하여 신호를 균일화시키고 온도 보상 프로그래밍을 이용하여 온도 특성에 따른 오차를 저감시키고자 한다. 또한 신호 계측부와 신호 처리부를 분리하여 신호 처리부를 프로그래밍 시켜 실시간으로 광 CT 특성을 모니터링 할 수 있는 시스템을 연구 검토하였다.
-
산업현장에서 많이 사용되고 있는 전력기기의 이상 발생에는 여러 가지 원인이 있을 수 있다. 어떤 경우든 사고로 진전되면 경제적, 인적 손실이 발생된다. 본 논문은 GIS 및 많은 전력기기에서 사용되고 있는 절연매체인
$SF_6$ 의 인가되는 전압의 종류에 따라 저온에서의 절연파괴 특성을 알아보기 위해 모의 GIS 장치에 교류 전압 및 부극성 직류 전압 등 전원의 종류를 달리 하면서 각각의 전원 종류에 대한$SF_6$ 가스의 절연파괴 전압을 측정하였다. 본 연구 결과는 SF6가스를 절연매체로 이용하는 전력기기를 혹한지역의 전력계통에서 사용할 때 전원의 종류에 따른 절연설계에 중요한 자료가 될 것으로 사료된다. -
In this paper the experiments of insulation characteristics by temperature change of
$SF_6$ gas in model GIS(Gas Insulated Switchgear) were described. From this results, the breakdown voltage was increased with a drop of temperature and an increase of the inner pressure in model GIS. It is considered that these result are fundamental data for electric insulation design of superconductor and cryogenic application machinery which will be studied and developed in the future. -
본 논문은 개폐기의 접점 형상에 따른 전계 분포 특성을 2차계 전자계 해석 program인 Flux-2D를 통해 살펴보았다. 2개의 모델을 선정하여 전극간 이격거리를 115[mm], 120[mm], 125[mm]로 변화를 주었을 때 최고 전계 강도의 변화를 살펴보았다. 1000[V] 인가시 최고 전계 강도는 (a)모델에서 115[mm]일 때 61.84[V/m], (b)모델에서 115[mm]일 때 66.90[V/m]로 나타났다.
-
풍력 및 태양에너지는 기존의 화력, 수력, 원자력 발전 등을 대신할 친환경적이고 공해가 없으며 양적으로도 무한한 대체 에너지원이다. 계절적인 기상변화 특성을 이용하여 풍력 발전 시스템과 태양광발전 시스템을 상호 보완시킴으로써 안정적인 전력 공급과 에너지이용 효율의 향상을 꾀할 수 있는 풍력-태양광 복합발전 시스템에 대한 관심이 고조되고 있다. 본 연구에서는 이러한 복합 발전 시스템을 효율적이고 안정적으로 운용하기 위하여 시스템의 각종 데이터들을 수집, 분석하고 파일로 저장하며 이를 인터넷을 이용하여 원격에서도 모니터링 할 수 있는 시스템을 구축한다. 여러 가지 교류와 직류의 전압, 전류들을 비롯한 풍속, 조도, 온도 등의 물리량을 측정하기 위하여 여러 형태의 변환기를 사용하였고 신호 조절 회로를 구성하였다. 데이터 수집 보드(DAQ)를 이용하여 컴퓨터로 데이터들을 읽어 들였으며, 시스템 운용을 위한 서버 프로그램과 이를 원격지에서 실시간 모니터링 및 저장된 데이터들을 다운로드 할 수 있는 클라이언트 프로그램을 작성하였다. 측정된 데이터를 시간, 기상 등의 여러 조건과 연관하여 분석하였다.
-
The paper is proposed maximum torque control of SynRM drive using learming mechanism-fuzzy neural network(LM-FNN) controller and artificial neural network(ANN). The control method is applicable over the entire speed range and considered the limits of the inverter's current and voltage rated value. For each control mode, a condition that determines the optimal d-axis current
$^i{_d}$ for maximum torque operation is derived. The proposed control algorithm is applied to SynRM drive system controlled LM-FNN and ANN controller, the operating characteristics controlled by maximum torque control are examined in detail. Also, this paper is proposed the analysis results to verify the effectiveness of the LM-FNN and ANN controller. -
This paper is proposed adaptive fuzzy-neuro controller for high performance of induction motor drive. The design of this algorithm based on fuzzy-neural network controller that is implemented using fuzzy control and neural network. This controller uses fuzzy rule as training patterns of a neural network. Also, this controller uses the back-propagation method to adjust the weights between the neurons of neural network in order to minimize the error between the command output and actual output. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of nor measured between the motor speed and output of a reference model. The control performance of the adaptive fuzy-neuro controller is evaluated by analysis for various operating conditions. The results of experiment prove that the proposed control system has strong high performance and robustness to parameter variation, and steady-state accuracy and transient response.
-
Interior permanent magnet synchronous motor(IPMSM) has become a popular choice in electric vehicle applications, due to their excellent power to weight ratio. The paper is proposed maximum torque control of IPMSM for high speed drive. The control method is applicable over the entire speed range and considered the limits of the inverter's current and voltage rated value. For each control mode, a condition that determines the optimal d-axis current
$^i{_d}$ for maximum torque operation is derived. The proposed control algorithm is applied to IPMSM drive system for high speed drive, the operating characteristics controlled by maximum torque control are examined in detail by experiment. -
This paper gives the information for fault and malfunction of the Elevator for the passenger. For analyzing the fault and malfunction of the elevator equipment we research the report of fault and malfunction which is written by ATP electric director and Elevator maintenance company during recently one year. We analyze the number of fault and malfunction according to classified by month, season, time and classify the kind of fault and malfunction such as stop, fault of door, malfunction of floor indication and so on. And now we research fault and malfunction for the power quality such as Sag, Swell, Interruption, Harmonic, electric voltage rise and so on at elevator equipments and are testing Elevator imitation equipment.
-
We have studied the loss characteristics of the electronic ballast for the 250 watt HID lamps. The researched electronic ballast has a low loss, a low THD for input current and the other reliable characteristics. By the experrimental results and the analytical method, we concluded that the switching devices loss is 33%, and the Inductances loss is 42.6% of the total losses.
-
A person's body resistance in the waterpark, public bath and similar places is lower than any other places due to effect of water. So low voltage may create a shock hazard for the human body in case of leakage or fault currents from lighting unit etc. We researched the related regulations these are internal standards, NEC, IEC and investigated the actual conditions for the prevention of electrical shock due to lighting units in the waterpark, public bath and similar places. So we could present actual facilities's problems and solutions
-
The electric demands increase, financial need for new power plant constructions and environmental problem have led to search for more efficient energy production and load management. To minimize the construction of power plants and reduce total power consumption include installation of demand controller to industrial applications. Accordingly to maximize the load control by the diffusion of demand controller, govermental economic supports as well as the analysis of energy saving effects. This paper presents the cost-effectiveness analysis for DSM program evaluation and case study to analyze demand controller DSM program.
-
April, 2004, Korea Train Express construction project has accomplished and opened over 10 year terms of huge works. This is a case study focused on the Exterior lighting effect of new & reconstruction works at the Central station opened recently, and the lighting display process of the subsidiary facilities. The comparison with the renowned international stations would be provided for the better installation methods. And the result of case study, it will go far toward improving the Lighting display process
-
This paper describes an simulation method to utilize the hybrid system with fuel cell and battery. The hybrid system has unique advantage to manage energy state between high energy system (fuel cell) and high power system (battery) according to various type of load. For proper design, the hybrid system is modelled and simulated. Especially, battery SOC is used as an important control parameter to decide the energy control.
-
클러스터 기반의 계층적 트리 구조는 대형화가 용이하면서 라우팅 프로토콜이 단순하다는 점에서 장점을 가진다. 본 논문에서는 무선 센스 네트워크에서 클러스터 트리 네트워크 관리를 효과적으로 지원할 수 있는 방안과 라우팅 프로토콜의 데이터 모음과 지연에 대해 분석한다. 수치 해석의 결과에서 보면 중간 노드에서의 데이터 모음을 통한 통신 메시지 수를 줄임으로 센스 노드의 에너지를 크게 절약할 수 있지만, 이에 따른 메시지 전달 지연이 커짐을 알 수 있었다.
-
It describes a design analysis and test results of an energy transfer system which consists of two 0.5 MJ superconducting coil and three Inverter-Converter Bridges(hereinafter called ICB). A point of design is to satisfy the required stored energy capacity rather than magnetic field density with minimum energy transfer time using the calculation results of state-space averaging methods instead of Fourier series. It is proven that the considered methods are effectively through system experiments.
-
Electric train is currently used widely, and much development is expected. But, in case of electric train, as comparison with diesel rolling stock, many electrical problem such as harmonic, voltage sag, EMI, EMC usually occur. Accordingly, in order to popularize an electric train, first, a study on electrical problem at an electric train must be accomplished. In this paper, one of electrical problems, arc characteristics according to loss of contact between pantograph and catenary was analyzed.
-
In this paper, a new a new full-bridge soft-switching phase shift PWM DC-DC Converter has been proposed, which is suitable for fuel cell based power generation system. The proposed converter has outstanding advantage over the conventional DC-DC converter with respect to high efficiency, high power density, and hish component utilization. In special. the proposed converter has predominant high boosting output voltage and high efficiency characteristics under the inherently severs low output voltage of the fuel cell through the overall load conditions. Moreover, the developed converter has been experimentally tested with the help of a fuel cell simulator, and can generate the V-I characteristics of proton exchange membrane(PEM) fuel cell, so that the performance of the proposed converter could be effectively examined and the validity of the converter could be verified.
-
This paper presents two new circuit topologies of DC bus lineside active edge resonant snubber assisted soft-switching PWM full-bridge DC-DC converter acceptable for either utility AC 200V-rms or AC 400V-rms input voltage source. One topology of proposed DC-DC converters is composed of a typical voltage source-fed full-bridge high frequency PWM inverter using DC busline side series power semiconductor switching devices with the aid of a parallel capacitive lossless snubber. All the active power switches in the full-bridge arms and DC busline can achieve ZCS turn-on and ZVS turn-off commutations and the total turn-off switching power losses of all active switches can be reduced for high-frequency switching action. It is proved that the more the switching frequency of full-bridge soft switching inverter increases, the more soft-switching PWM DC-DC converter with a hish frequency transformer link has remarkable advantages for its efficiency and power density as compared with the conventional hard-switching PWM inverter type DC-DC converter
-
In this paper, proposed new partial resonance ZCS PWM controlled High frequency insulated Full-bridge DC-DC converter not using exciting current of high frequency transformer. It is compared with the existing principles in characteristics. It also realizes a widely stabilized ZVS operating using new ON-OFF control method at synchronized power rectification MOSFET of high frequency insulated transformer secondary. Besides, it is brought over 97[%] measurement efficiency by proposed DC-DC converter.
-
A This paper presents a novel three-phase current-fed Pulse Width Modulation converter with switched- capacitor type resonant DC link commutation circuit operating PWM pattern strategy under a design consideration of low-pass filter, which can operate on the basis of the principle of zero current soft-switching commutation. In the first place, the steady-state operating principle of this converter with a new resonant DC link snubber circuit is described in connection with the equivalent operation circuit, together with the practical design procedure of the switched-capacitor type resonant DC link circuit is discussed from a theoretical viewpoint on the basis of a design example for high-power applications. The actively delayed time correction method to compensate distorted currents due to a relatively long resonant commutation time is newly implemented in the open loop control scheme so as to acquire the new optimum PWM pattern. Finally, the experiment or set-up in laboratory system or this converter is concretely demonstrated herein to confirm a zero current soft-switching commutation of this converter. The comparative evaluations between current-fed hard switching PWM and soft-switching PWM converters are carried out from a viewpoint of their PWM converter characteristics.
-
This paper describes the touch voltages and potential distributions according to the distance between distribution concrete pole and ground rod when the current is injected to a ground rod through overhead ground wire. Touch voltage is measured in four directions. The touch voltage and ground potential distribution per 1 A are analyzed. The touch voltage was the highest at the around surface just above the ground rod.
-
본 논문에서는 인체모형을 이용하여 고압감전실험을 하였다. 케이블을 인체모형이 감싸쥐고 있는 경우와 절연체를 통한 접촉을 임펄스와 변압기를 이용하였다. 이때 인가전압은 22,900[V]이다. 고전압에 의해 절연체가 파괴되어 감전의 위험이 있는 것을 알 수 있었으며, 실험을 통해 분석하고자 하였다. 고전압에서의 직 간접적인 감전형태를 알 수 있었으며 고전압 감전사고를 예방하는 중요한 자료로 사용될 것이다.
-
In this paper, we analyze on the effect of RC filter to mitigate transient overvoltage on the high voltage induction motor fed by H-bridge cascaded 7-level inverter. The switching surge voltage becomes the major cause to occur the insulation failure by serious voltage stress in the stator winding of high voltage induction motor. The effect of switching surge appears more serious in high voltage induction motor than low voltage induction motor. Consequently, we demonstrated that the RC filter connected to the motor terminals greatly reduces the transient voltage stress md ringing. The results of simulation show the suppression of transient overvoltage at the motor end of a long cable. using EMTP
-
This paper presents the characteristics of antenna factors for sleeve dipole antennas with a broad bandwidth. The coupled integral equations for the unknown current distributions on each elements are derived and solved by applying Galerkin's method of moments. The flatness of antenna factor is considered by variation of the length and number of sleeve elements.
-
Chung, Chung-Byeong;Jeon, Kee-Young;Lee, Sang-Chip;Kim, Dae-Gyun;Lee, Hoon-Goo;Han, Kyung-Hee 409
We are interaction refrigeration warehouse cold water pump system and photovoltaic generation system. At this time, a target pressure is able to control in spite of change of the pressure according to pump head and rate of flow of pump. Also, we carry out the vector control of BLDC moor with the maximum torque operation and a high reliability from territory of each operation speed. Therefore, in this paper, we conclude energy saving technique of refrigeration warehouse cold water pump system. -
This paper presents the two lossless auxiliary inductors-assisted voltage source type half bridge (single ended push pull: SEPP) series resonant high frequency inverter for induction heated king roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimental ones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proved from the practical point of view.
-
-