Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference (한국조명전기설비학회:학술대회논문집)
The Korean Institute of IIIuminating and Electrical Installation Engineers
- 기타
Domain
- Electricity/Electronics > Home/Electric Appliances
2007.11a
-
장수명, 고효율의 광원 개발이 중요한 만큼 조명기구의 개발 또한 중요하다. 무전극 램프에 적용할 수 있는 설계 법을 기본으로 램프 취부 방식의 변경, 반사갓 구조의 변형 등을 통해 새로이 개발된 200W급 무전극 형광램프 전용의 반사갓을 설계하였다. 사이즈를 최소화하여 비교적 콤팩트한 반사갓을 설계하였고, 둥근형, 전구형 램프의 적용범위에 맞는 배광을 만족시킬 수 있는 다양한 조명기구의 개발이 가능하다는 것을 다시 한 번 입증하였다.
-
This paper presents that what's the right EOLL(End of Lamp Life) phenomenon on fluorescent lamp and how to detect it according to the lamp status. In normal end of life situation for fluorescent lamps is emitter depletion of the cathodes. So, in most cases, the discharge will extinguish and the lamp will not start. But if the ballast is capable of sustaining the discharge, a new condition arise. Especially, the T4 and T5 lamp which has a short distance from cathode to socket of lamp future must have the EOLL Protection function.
-
육상 운송수단의 중심에 있는 철도차량의 조명 환경을 현재 운행되고 있는 KTX, 새마을, 무궁화호를 중심으로 조사하여 현재의 조명환경을 파악하고 차량별 조도 비교 및 사용광원을 검토하여 에너지 절약 및 철도차량 조명환경 개선을 연구함으로써 쾌적하고 안락한 철도조명 환경을 만들고자 한다.
-
차량에서 전조등의 밝기 변화가 운전자의 장애물 인식능력을 저하시키고, 운전자에게 불쾌감과 스트레스를 제공한다면 운전자 및 보행자의 안전에 위협이 될 수 있다. 그러므로 차량 전조등의 밝기변화 패턴에 영향을 미치는 전조등의 전압과 시간을 변수로 하여, 순간적으로 밝기변동이 발생하였을 경우, 연령대별(20/60대)로 운전자가 느끼는 심리적인 반응(불쾌감)이 어떠한 경향을 갖는지를 파악하는 것이 중요하다. 따라서 본 논문에서는 운전자의 야간 주행시 전조등의 밝기변동에 대한 경향을 파악하기 위해 전조등의 밝기변동 영상을 제작한 다양한 전조등의 밝기패턴(전압패턴 A/B)을 제공하여 본 시험을 위한 1차 예비 시험을 실시하였다. 예비시험 결과, 전압패턴 A에 대해서는 전압과 시간변이 대해서 모두 영향을 받는 것으로 나타났으며, 반면, 전압패턴 B의 경우에 있어서는 시간변이 보다 전압변이가 더 큰 요소로 작용하는 것으로 나타났다. 또한 불쾌감을 느끼는 것을 수치적으로 표현하였을 경우에, 전압패턴 A보다 B패턴에서 더 많은 불쾌감을 느끼는 것으로 파악되었다. 현재, 본 연구는 진행중에 있으며, 앞으로, 2차/3차 예비시험을 통해, 연령대별 시인능력평가 및 심리적 반응 평가, 도로조명의 유무에 따른 운전자의 시인능력 평가, 그리고 전조등의 밝기변동 빈도 수에 대한 심리적 반응을 모의시험하고 경향을 파악하고 있으며, 이를 통해서 본 시험을 준비중에 있다.
-
정보통신부에서 소비되는 에너지는 우체국 건물의 운영에 주고 사용되고 있어, 에너지절약은 건물의 실비를 효율적으로 관리하는 것이 매 중요하다. 이에 우체국 건물의 에너지 소비현황과 운용실태를 조사 분석하였으며, 그 결과 비효율적인 운영체계가 문제점으로 도출되었다. 이 문제점을 개선하기 위하여 시스템, 조직, 인력, 운영 등을 유기적으로 통합 관리 할 수 있는 방안이 필요하다. 본 논문은 도출된 문제점에 근거하여, 인터넷을 이용한 군 관리시스템 도입으로 전국에 우체국 건물의 자원을 통한, Group 관리하는 방안을 제시하였으며, 군(群) 관리시스템 적용 시 얻어지는 예산질감 및 기대효과에 대하여 도시하였다.
-
The generation cost of photo voltaic is the most expensive among the renewable energy. To reduce the generation cost of photo voltaic, the proposed method added the regeneration power of elevator. Therefore we have the simulation results the proposed method is 60[%] higher than the previous photo voltaic generation for efficiency of generation.
-
In this paper the experiments of breakdown characteristics
$SF_6$ liquid ($LSF_6$ ) in model GIS(Gas Insulated Switchgear) were described. From the experiments results, The ability of$LSF_6$ insulation is higher than high-pressurized$SF_6$ gas. The breakdown characteristics of$LSF_6$ were produced by bubble formed evaporation of$LSF_6$ and bubble caused by high electric emission. It is considered in this paper that the results are fundamental data for electric insulation design of superconductor and cryogenic equipments machinery which will be studied and developed in the future. -
This paper gives the current status of lightning damages in apartments which are obtained by questionnaire and the cases of lightning damages in Korea. Survey result shows that lightning damages are increasing every year and taking place everywhere not only building but also mountain. As a result advanced lightning protection systems are required to reduce the lightning damages in various structures.
-
In this paper, we proposed a design photovoltaic generation systems with SEPIC-Flyback converter. The SEPIC-Flyback converter is operated to SEPIC converter the state turn-on of the switch and the state turn-off the switch is operated Flyback converter. Therefore application rate of the core increases and voltage stress of switch and transformer decreases with active clamp operation. Also we performed MPPT(Maximum Power Point Tracking) control for efficient working of Photovoltaic Dower generation system.
-
철도는 다른 수송수단에 비하여 많은 인원과 물류를 안전, 신속, 정확하게 운송 할 수 있는 기간산업으로, 매우 중요한 시설이다. 현재 철도시설을 담당하는 전문 인력의 수가 부족하여 철도신호기술사 확보가 시급히 요구되고 있다. 이에 철도신호기술사고시를 준비하는 사람은 많은 반면, 접근방법을 몰라 어려움을 느끼고 있다. 본 논문은 지난 15년간 기 출제된 시험문제와 최근 5년간의 문제에 대한 출제경향 및 철도관련 교육기관의 교과목을 조사, 분석하였다. 분석결과를 토대로 철도신호기술사고시를 준비하는 수험생으로 하여금 쉽게 자격취득 과정에 접근할 수 있는 방안을 제시하였으며, 또한 철도관련 교육기관의 교과목 중, 철도신호기술사 자격취득을 위한 필수교과목을 선별 제시하였다.
-
In this paper, we composed solar generation system with multi-phase interleaved boost converter Solar generated voltage is low, so it has need of the boost power conversion device for supply power to normal load. The multi-phase interleaved boost converter is easy to boost voltage and it can be reduced both input current ripple and output voltage ripple because it is composed with multi-phase. We simulated and tested multi-phase interleaved boost converter applied three-phase.
-
고연색성의 실시간으로 색온도 제어 가능한 승강기용 조명 제품 개발을 위하여 4계절 별 일 중 주광의 색온도 변화를 계산하였다. 4계절 별 일 중의 색온도 변화는 대한민국 서울의 위치를 기준으로 태양광 직사조도, 청공광조도 등을 계산하고 지면조도와 색온도의 관계로부터 춘분, 하지, 추분, 동지의 일 중 색온도 변화를 계산하였다. 이 값들을 색온도 제어회로의 Microprocessor에 이식함으로 4계절 별로 실시간으로 색온도가 변화하는 승강기용 조명기구를 개발하였다. 또한 개발 시제품의 전기적, 광학적 성능 측정 결과 각각의 개발 목표 항목을 만족시켰다.
-
본 논문에서는 고 연색성의 실시간으로 색온도 제어 가능한 승강기용 조명제품 개발을 위하여 제품에 사용될 LED Package를 제작하고 고연색성 실현을 위한 색온도 제어 기초실험을 행하였다. 그리고 20W 급의 LED 광원모듈 구동회로와 색온도 제어를 위한 제어회로를 설계하였다. 또한 음영 제거 및 글레어 차단, 효과적인 광색혼합을 위하여 확산배광을 달성하기 위한 R, G, B, A, W LED의 최적 배치 및 렌즈의 광학설계를 수행하였고 LED에서 발생하는 열을 효과적으로 발산하여 LED 조명모듈의 온도를 낮추기 위한 방열설계를 실시하였다.
-
터널조명 상황을 안전하고 신속하게 측정하기 위해 고속주행에서도 노면의 조도와 휘도에 대해 다량의 데이터를 수집할 수 있는 '고성능 터널조명 측정시스템'을 개발하였다
-
본 논문에서는 다양한 분야에서 응용될 수 있는 아날로그 신호를 디지털 신호로 변환하는 회로를 이용한 전자식 안정기를 구성하였다. 회로의 구성은 온도센서를 이용하여 안정기 ON/OFF 제어를 통한 냉음극 형광램프의 색을 제어하였고 온도센서뿐만 아니라 광센서, 가변저항, 음성센서 등 거의 모든 아날로그 신호의 센서를 사용 할 수 있도록 구성하였다.
-
현재 LED 전용의 렌즈로서 개발되어 있는 제품들은 대부분이 매우 좁은 빔각을 가지는 집광렌즈이지만 이를 사용하여 다양한 조명기구의 배광을 달성하기는 불가능하다. 본 논문에서는 가로등 형 배광을 가지는 대칭형, 비대칭형 배광을 가지는 선형 렌즈의 설계를 진행하고 그 성능을 시뮬레이션 하였다.
-
이 논문에서는 100W급 Discrete LED 투광기 조명 제품 개발에 관한 것으로, 3W RGBA LED를 이용하여 광색 및 색온도 제어가 가능하도록 광학/방열/회로/시스템 설계를 통한 시제품을 제작하였다. 그 결과, 색온도
$2,000{\sim}10,000K$ 범위에서 흑체궤적에 정확히 일치하면서 연색지수가$71{\sim}91$ 까지 고연색성을 실현하였으며, 동작전압$90{\sim}250VAC$ , 효율 87%, 역률 93이상의 양호한 전기적 특성을 나타냈다. 또한 투광기의 협각/중각/광각 배광을 만족하기 위하여 LED 렌즈를 설계하였으며, 신뢰성 확보 및 주위온도에 따른 광출력 변화를 최소화할 수 있는 방열설계를 실시하였다. -
Channel letter용 High Power LED Module 개발하기 위하여, 1W 백색(단색) LED 1EA LED Module과 1W 백색(단색) LED 3EA LED Module, 3W RGB LED 1EA LED Module에 대한 3종의 제품 개발하고, 고효율 RGB LED SMPS 회로 설계, 광색 가변을 위한 RGB LED 최적 배치 및 렌즈 설계, 고출력 1W LED Module 방열 설계 및 기구 개발, SMPS 회로 및 RGB LED 배열 회로 통합 시제품 직접 제작하였다, 신뢰성 평가 및 성능 시험 등을 실시하였으며, T자형 Channel letter에 기존 고휘도 LED Module과 개발된 고출력 LED Nodule을 동시에 적용한 결과, 기존 고휘도 LED Module를 사용하였을 경우에는
$1W{\times}10$ 개로 10W의 전력을 소비하였으나 개발된 고출력 LED Nodule은$3W{\times}3$ 개로 9W의 전력을 소비하였으며 1W의 에너지가 절감되었음에도 불구하고 평균 휘도는 약 2.5배, 균제도는 1.43 배가 더 우수한 결과를 얻었다. -
본 논문에서는 실내전반 조명용 LED 광천장 모듈의 렌즈설계와 이를 적용한 사무실 조명설계를 하였다. 본 연구에서는 조명광학 설계 전용 프로그램인 Photopia 2.0과 조명계산 전용 프로그램인 LumenMicro 2000을 활용하여 LED 광천장 모듈의 통합형 렌즈를 설계하고 사무실에 적용하여 작업면의 조도분포, 평균조도, 균제도 등을 계산하였다.
-
LED is expected as an environmentally friendly light source with its good reliability and long lifetime. A few ten mW white LED can substitute for the indicator light source, and it is required to study several watt multi-chip semiconductor light sources in order to replace the light sources for general illumination such as incandescent lights and fluorescent lamps. Since the optical technology used for several mW white LED light source uses only 30% to 50% of the light, it is required to develop the design technology of optical system and lens to improve the efficiency more than 80% for insuring the high power of white LED. In this paper, we designed and fabricated new structure reflector to increase the efficiency.
-
A design of Fly-Back electronic ballast for Xeon Dielectric Barrier Discharge Flat Fluorescent Lamp.본 논문에서는 제논 유전체 장벽 방전형 평판형광램프용 Fly-Back방식 전자식 안정기를 설계하였다. 본 전자식 안정기는 Fly-Back방식의 능동형 역률 보상 회로와 인버터회로를 사용하여 기존의 Sine wave의 형태가 아닌 펄스파 형태의 출력을 만드는 고역률, 고신뢰성 전자식 안정기를 제작하였다. 제논 평판형광램프의 점등전압은 고압이 사용되므로 램프 파손의 경우와 무부하의 경우로부터 사고를 방지하기 위해 보호회로를 사용하여 이상전압, 이상전류에 의한 사고를 차단했다.
-
Recently, the development of LEDs is important and prevalent in the lighting market. The purpose of this study is to evaluate the performance of white LEDs by comparing with fluorescent lightings. First, this study performed to survey technical developments and design trend of white LEDs. Second, comparing white LEDs with fluorescent lightings which are widely used, this paper evaluated physical characteristics of white LEDs. Lastly, this study Performed subjective evaluation which is comparing side-by-side rooms installed LEDs and fluorescent luminaires to investigate psychological and physical evaluation. The results of this study could be used as fundamental data for the development of white LEDs.
-
24" LCD Monitor용 LED BLU를 개발하기 위하여 1.5W R,G,G,B가 하나의 PKG에 들어있는 LED를 이용하여 Direct type의 Back Light Unit을 개발하였다. 방열 및 휘도 균일도를 고려하여 LED part를 설계, 개발 하였고 LED를 pulse로 구동하기 위하여 Switching circuit이 포함되는 구동회로 부분을 설계, 개발하였다. 또한 Color Sensor와 ICM (Integrated Color Management) IC를 사용하여 Color를 Control하는 제어회로 부분도 개발을 하였다. 제어회로 부분을 개발하기 위하여 MicroController를 사용하였으며 ICM IC와의 통신을 위한 부분도 개발하였다. 이러한 구성을 개발하여 시제품을 직접 제작하였다. 평가를 위하여 성능시험을 실시하였고 광학적인 평가도 시행하였다. 제작된 시제품은
$L558{\times}W359{\times}H30$ 으로 하였다. 휘도는 목표휘도를 이루었으며 균일도는 85% 이상이 되었다. -
The aim of this study is to discover the possibility as the shading systems, and to analyze daylight distribution and characteristic of light on the Korean traditional paper. Korean traditional paper has a good efficiency to diffuse the light and is less glare than Roller Shade fabric. In the president office buildings and apartment houses, daylight characteristic of Korean traditional paper windows could be used as a preliminary data to develop a window system which makes greatest performance of daylight.
-
In a design of DC ballast for fluorescent lamp, pre-stage of DC-DC converter is required to keep the constant output lumen performance regardless of variable DC input voltage. In this paper, flyback topology is used for optimum performance of 32W lamp, and various important design points for successful operation over the whole operating range are described.
-
본 연구에서는 조명 환경의 영향을 크게 받는 사무 공간의 조명환경 실태를 조사하였다. 고효율 조명기기를 이용하는 사무 공간 내의 조도를 측정하고, 설문 조사를 실시하였다. 그 결과 대부분의 사무 공간이 KS조도 기준보다 높은 수준을 나타낸데 비하여, 균제도, 글레어(눈부심) 등 조명의 질적 요건에 대한 배려가 부족하여 시환경에 대한 평가는 좋지 않은 경향을 나타냈다.
-
본 연구에서는 터널조명 시스템에 대한 국제적 동향을 알아보기 위해 일본과 유럽의 터널조명 시스템에 대하여 자료를 수집하였다. 이러한 자료를 근거로 Lightscape 시뮬레이션 프로그램과 경제성 평가도구 WEELS를 이용하여 터널의 기본부를 조명하는 광원의 종류, 주간과 야간, 터널 설계속도 그리고 기구배열 방법에 따라 터널조명시스템에 대한 비교평가 연구를 진행하였다.
-
본 논문은 일반조명용과 LCD Backlight에 적용 가능한 제논 유전체 장벽형 평판형광램프에 대한 연구이다. 일반적으로, 수은을 포함한 형광램프는 낮은 온도에서의 휘도문제와 상대적으로 긴 점등시간, 수명, 그리고 환경 문제가 있다. 이러한 문제점들을 해결하기 위해서 제논 유전체 장벽형 평판형광램프가 연구되었다. 100(W)급(
$384{\times}321{\times}10mm$ )으로 제작된 램프는 AC 펄스 전압에 의해 균일도, 안정한 방전, 우수한 전기적 및 광학적 특성을 가진다. 더 높아진 효율은 빠른 상승시간을 가진 AC 펄스전압, 주파수와 듀티의 구동 최적화, 전극의 형상, 압력 최적화 등에서 얻어진다. 이 연구에서 제논 유전체 장벽형 평판형광램프는 90(%)의 균일 도에서 7,600(cd/$m^2$ )의 휘도와 32[1m/W] 이상의 효율을 얻었다. -
본 논문에서는 현재 가장 많이 사용되는 조명용 LED광원에 대한 EMI특성을 측정 분석 분석하였다. LED 광원의 자기장 유도전류와 각각의 인입 전원선에 대한 잡음 단자전압 등을 측정 및 분석하였으며, 향후 LED광원 관련 규격 제안시 참고자료로 활용될 것으로 판단된다.
-
Recently, may high-rise buildings have been constructed, and will be constructed so that concerns about high-rise buildings have increased. We need to develop energy saving techniques immediately because the high-rise buildings consume a lot of energy. The most of effective energy saving method is the application of the efficient lighting designs and fixtures. The purpose of this study is to analyze the trend of lighting design, fixture and control system in Korea and it can be used the lighting application guide-line for the high-rise buildings.
-
본 연구에서는 표시방전 유지펄스의 개수와 폭의 변화에 따른 표시방전의 휘도특성을 측정하였다. 실험결과, 1TV 필드 동안 인가되는 표시방전 유지펄스의 개수가 증가할수록 휘도는 완만한 포화곡선을 나타내며 증가하였고 펄스의 폭은 좁아질수록 휘도가 증가하였다. 그리고 펄스폭에 대한 휘도의 증가 정도는 펄스의 개수가 증가할수록 커졌다. 그러나 하나의 펄스에 대한 휘도는 오히려 감소하므로 표시방전 유지펄스의 개수나 폭을 늘리는 데는 한계가 있음을 알았다.
-
Electrooptic characteristics of Xe-type flat fluorescent lamps (FFL) have been investigated by using a Q-V Lissajous method. It was found that the luminance of the Mgo-coated FFL became more than doubled compared to normal FFLs operated at the same driving voltage, indicating the possibility of the efficacy improvement in the MgO-coated FFLs. Change in the driving condition, in particular, the duty ratio had effects on the electrooptic properties, and it was found that the duty ratio of 50% was the optimum condition from the viewpoints of the efficacy and the lamp voltage.
-
We need two operation modes to obtain the complex hologram without bias and the conjugate image in the modified triangular interferometer(MTI). To solve the problem, we proposed the optimized MTI with one wave plate, which can obtain cosine and sine functions by the combination of one wave plate and one linear polarizer. In the extraction of phase term using the combination of polarization components, the phase error occurs, and we simulated such potential phase errors in the optimized MTI.
-
This paper describes the simulations on the actual measurement analysis and lighting design for recreational sports facility. Based on illumination requirements, sports may be divided into multidirectional sports and unidirectional sports. Typical multidirectional aerial sports include Jokcu. These sports require well distributed horizontal illumination and uniformity according to aiming. Therefore, this paper estimates horizontal illuminance and uniformity ratio by actual measurement of sports lighting at recreational Jokcu court in Cheju National University and evaluation of sports lighting conditions for optimal design by computer simulation.
-
현재 우리나라 대부분의 사무실 및 학교교실에는 형광등 스위치가 창측, 중간, 복도측등으로 회로가 분리되어 있으나 날씨가 맑고 태양빛이 많이 비치는 경우(기준조도 이상)에도 창측의 형광등이 항상 켜져 있는 경우가 대부분이므로 외부 쪽 창측에 설치되는 형광등기구에 외부광량(일조량)에 따라 자동으로 ON, OFF되는 센서가 부착된 형광등기구를 사용하여 에너지가 절감될 수 있는 방안을 연구하고 자한다.
-
본 연구에서는 건축물 설계 시 조명전력 사용량 실태 조사 및 국내 조명전력 절감정책 과 외국에서 적용하고 있는 조명전력 허용기준의 적용사례와 국내 건물 중 사무실빌딩에서의 조명전력사용 실태를 조사 분석하여 향후 국내 조명전력허용기준을 적용하기 위한 선결과제 및 필요성을 제시하였다.
-
The grounding of an electrical system is one of the essential elements for public safety. Domestic practice of grounding system design has been to get grounding resistance values which are classified by facilities or equipment in the regulations. But the concept of grounding system design of IEC is, as a main factor of safety index, to consider touch voltage and step voltage instead of the resistance value itself. Recently IEC actively develops or revises safety related standards which are essential for the grounding system performance. In this paper, we present the recent trend of the international standards on the safety criteria for Electric Shock Protection.
-
This paper presents experimental results on the safety of persons due to a ground fault in 22.9 kV-Y distribution system In order to evaluate the touch voltages due to internal ground faults in a step down transformer based on the newly prescribed KS C IEC 60364 standard series, the verification tests in a 22.9 kV multi-grounded neutral system were carried out From the experimental results, it was found that there will be significant potential rise jeopardizing LV equipment insulation in case of separate grounding between HV and LV system and the effective measures against hazardous touch voltages due to a IN side ground fault in the common grounding system between HV and LV system are proposed. As a consequence, it was found that the equipotential bonding is an important prerequisite for the effectiveness of the protective measures for the safety of persons in the common ground system between 22.9 kV-Y and low-voltage grounding system.
-
This paper presents the installation of measuring system for the transient behaviors of grounding system impedances using portable impulse current generator. The measuring system is controller, with controller, power supply, impulse current generator and data aquisition system. In the evaluation of the impulse response in a ground electrode, the step response is calculated based on the ratio of the voltage and current observed.
-
Recently, ozone is utilized in various fields and its needs are expanding. In this paper, plate type ozonizer have been fabricated to investigate discharge parameter(input power, flow rate of supplied gas, electrode form, etc.) effect to discharge. And the conditions of discharge parameter have been investigated for optimum ozone generation. Ozone concentration is continuously increased with increasing input power for same discharge space, and ozone yield is also increased until maximum point after that it is saturated. Ozone concentration is inversely proportional to flow rate of supplied gas but ozone generation and ozone yield characteristics are improved.
-
It is increased electrical energy consumption with the development of intelligence society in buildings and thus an energy conservation through efficient use of electricity and reliability, safety, etc became more important. This research paper intensively investigated performance based construction specifications and design criteria of electrical installations in domestic and foreign country. It is necessary to analyze the key features based on performance and general trend about contractor guarantee, warranty method, performance design criteria from the investigated data. This paper shows a reasonable performance based construction specifications and design criteria of electrical installations.
-
The computer simulation for the fault current limiting characteristics of the superconducting fault current limiter (SFCL) using the magnetic coupling of two coils was performed. The magnetic fluxes generated from two coils were canceled out during a normal time. However, the resistance generation of high-
$T_c$ superconducting (HTSC) element after a fault occurrence keeps up the magnetic fluxes of two coils and contributes to the fault current limiting operation. Through the computer simulation for the fault current limiting characteristics based on its electrical equivalent circuit, its operational current and the limiting impedance could be improved by adjusting the inductance ratio between two coils. -
본 논문에서는 이중 구조의 공동에서 작은 공동 내부에 존재하는 전자파원으로부터 방사되는 전자파를 내부 공동의 개구를 지나 외부 공동의 개구를 통해 방사될 때, 외부 공동의 개구 크기 변화에 따른 방사 전자파의 크기를 FDTD법으로 검토하고 있다. 외부 공동 개구의 크기는 최대 방사 전자파의 주파수를 결정하므로 개구의 크기를 조절하면 방사되는 전자파의 크기를 제어할 수 있음을 이론해석을 통하여 확인하고 있다.
-
산업현장에서 많이 사용되고 있는 전력기기에 결함이 발생하면 치명적인 사고로 진전되어 경제적, 인적 손실이 발생될 수 있다. 본 논문은 현재 대전력기기에서 많이 사용되는
$SF_6$ 절연가스의 압력 변화에 따른 부분방전을 모의하고, UHF법을 이용한 모의 GIS 내부 부분방전 신호 측정 및 접지 전류를 측정하여 부분방전 시 방사되는 방사전자파의 스펙트럼 특성과 접지 전류 파형 특성을 분석하여, 챔버 내의 압력 변화가$SF_6$ 가스 부분방전에 미치는 영향을 측정하였다. 이러한 연구는 현장 GIS 및$SF_6$ 가스 절연 전력설비에서 내부 압력 변화가 원인이 되어 발생되는 절연파괴 사고의 방지에 중요한 역할을 할 것으로 사료된다. -
The output voltage of a synchronous generator is regulated constantly by field current control of excitation system. Synchronous generator exciter has two type, first one is Drop control type by thyristor and second one is exciter current control type through power output by PWM control. Control method of the second one prevails, but when the power devices have a breakdown, output voltage of the generator rises rapidly. This exciter must have a protection circuit and system is complicated, so reliability is poor Excitation control type which is drop control type control only 10% of the power, so it can be improved precision. When a trouble come to the controller, output voltage of a generator don't rise excessively and the voltage rise about 10%, so it has a excellent reliability. This paper prove stability of the digital AVR.
-
This paper presents an analysis method of transient ground impedance using the lightning impulse and variable frequency currents. The transient ground impedance strongly depends on the configuration and size of grounding electrodes and the shapes of impulse currents, and the inductance of grounding electrodes has a significant affect on the transient impedance of the grounding system. There are some differences between the effective impulse ground impedance which was introduced some papers and the transient ground impedance. The transient ground impedance measured from the peak value of impulse voltage and the peak value of impulse current is more reliable than the effective impulse ground impedance.
-
본 연구는 현장 분진포집에 의한 도전율측정과 전기설비 위험을 평가한 것이다. 현장에서의 분진발생은 전기설비에 악영향을 주어 전기설비의 운영시 발생되는 것과 주변환경적 요인에 의해 발생되는 분진이 주를 이루고 있다. 현장에서 포집된 분진으로부터 분진의 종류, 도전율 특성에 의해 전기설비가 영향을 미칠 것으로 판단되었다. 또한 일부 부식성 가스에 의해 노출된 전기설비의 위험성을 분석하고 관리기준을 마련할 필요가 있는 것으로 나타났다. 분진의 종류에 따라 사고의 과정은 빠르거나 오랫동안 지속되었다가 발생되는 근원적 원인을 규명하고자 국내현장에서 분포되고 있는 분진의 종류와 특성 분석과 관련규정을 검토하고 현장실태에서 나타난 문제점을 검토하여 분진발생지역에서의 전기설비 안전관리를 위한 기준마련에 이용될 것으로 기대된다.
-
Lee, Bok-Hee;Choi, Jong-Hyuk;Park, Geon-Hun;Jun, Byung-Wook;Kim, Hoe-Gu;Beak, Young-Hwan;Lee, Kyu-Sun 239
In this paper we describe streamer propagations characterizing underwater pre-breakdown and breakdown behaviour under impulse voltages. Streamer corona branches in lower resistivities are much thicker and brighter than those in higher resistivities. The negative streamer channels not only have more branches but also widely spread out than the positive streamer channels. The succession of streamer coronas during re-breakdown produces a stepwise propagation. The pre-breakdown currents consist of the conduction current and streamer corona current pulses. -
본 연구는 직류 부극성(DC(-)) 전압에서 제조공기(I-Air)의 온도(T)의 변화(
$+10[^{\circ}C]{\sim}-30[^{\circ}C]$ )에 따른 절연특성을 구명하였다. 절연특성은 GIS모의 챔버 주입 압력(P)과 비례하는 특성을 보였으나 T가 저하되면서 그 절연특성이 감소하는 경향을 보이지 않고 오히려 증가하는 구간이 존재하였다. 그리고 챔버내 P의 크기가 클수록 T저하에 대한 P감소율이 더 컸으며, 절연파괴전압($V_B$ )감소폭도 이와 비례해서 60[N/$cm^2$ ]에서 가장 큰 변화를 보였다. -
본 연구는
$SF_6$ 를 대체하기 위한 건조공기(Dry-Air)의 특성을 연구할 목적으로 교류고전압 인가 시 압력(P)변화 및 갭 길이의 변화에 따른 절연파괴특성을 연구하였다. 본 연구를 통해 챔버 내의 P가 증가할수록 절연파괴 특성은 증가하는 것을 확인했다. 그리고 불평등전계 보다 평등전계에서 절연파괴특성이 더 증가하고 전극간거리(d)가 증가할수록 절연파괴특성이 증가하는 것을 확인했다. -
본 연구는
$SF_6$ 를 대체하기 위한 건조공기(Dry-Air)의 특성을 연구할 목적으로 교류 및 직류고전압 인가 시 압력(P)변화 및 갭 길이의 변화에 따른 절연파괴특성을 연구하였다. 본 연구를 통해 챔버 내의 P가 증가할수록 절연파괴특성은 증가하는 것을 확인했다. 그리고 불평등전계 보다 평등전계에서 절연파괴특성이 더 증가하고 전극간거리(d)가 증가할수록 절연파괴특성이 증가하는 것을 확인했다. -
본 연구는 현재 전력설비에 사용되고 있는
$SF_6$ 가스의 대체 절연가스로 건조공기(Dry-Air)의 절연파괴특성 연구를 위하여 모의 GIS 챔버와 AC 300[kV], DC(-) 150[kV] 전원장치로 교류 및 직류고전압을 인가하여 연구를 수행하였다. 평등전계인 구전극 대 구전극을 이용하여$SF_6$ 가스와 건조공기(Dry-Air)의 절연내력을 비교하기 위해서 20, 30 및 40[N/$cm^2$ ]까지 가스의 압력변화를 주었고 각 압력별 전극간거리(d)에 따른 절연파괴전압($V_B$ )을 연구하였다. -
In this paper approves AC high voltage by experimental GIS(Gas Insulated Switchgear) chamber and AC 300[kV] power source to study breakdown characteristics by pressure(P) change and change of electrode distance(d) at AC high voltage of Imitation Air(I-Air,
$N_2$ :$O_2$ = 79(%) : 21[%]) to alternate$SF_6$ and achieved research. Gave P change of I-Air to study I-Air's breakdown characteristics using uniform(Sphere-Sphere electrode) and non-uniform fields(Needle-Plane electrode) and studied relations breakdown voltage($V_B$ ) by each P different d. -
In this paper approves (AC and DC) high voltage by experimental GIS(Gas Insulated Switchgear) chamber and (AC and DC) power source to study breakdown characteristics by pressure(P) change and change of electrode distance(d) at (AC and DC) high voltage of Imitation I-Air,
$N_2$ :$O_2$ = 79(%) : 21[%]) to alternate$SF_6$ and achieved research. Gave P change of I-Air to study I-Air's Dielectric Strength using uniform and non-uniform fields(sphere-sphere and Needle-Plane electrode) and studied relations dielectric strength($V_D$ ) by each P different d. -
오존무 분사장치는 흡입구와 내에 소정의 공간이 형성된 케이스와 자동 손잡이와
$360^{\circ}$ 회전이 가능해 운반 및 이동이 간편한 케이스, 상기 케이스의 내부 소정 부위에 공기 흡입구로 흡입되는 공기 중에 포함된 먼지 및 습기를 제거하는 제습 장치와, 원료가스인 공기를 일정하게 제공하는 송풍기, 강력한 살균 소독기능을 지닌 오존발생기, 오존을 발생시키기 위한 고주파 펄스 전원장치, 입자경이$3{\sim}40{\mu}m$ 이하의 이류체 미세 분사형 노즐, 살수통(물을 담는 용기) 및 기능 조절부(펄스전원제어, 타이머 조절, 송풍기 제어, 이류체 미세 분사형 노즐스위치 제어)로 성되어 작동하는 것으로 일반적인 가습기와는 다르다. 그리고 강력한 살균, 소독, 탈취 및 대기의 정화 기능이 있는 오존을 이용하는 동시에 기존의 방식보다 간단한 구조의 분무발생 수단을 구비함으로써 전체적으로 구성을 간단하게 하면서 대기 정화 효율을 향상시키는 장점이 있다. -
Lim, Jae-Chan;Kim, Jae-Chul;Lee, Hui-Tae;Kim, Jin-Seok;Han, Soung-Ho;Lee, Su-Gil;Lee, Eun-Gyu 271
In this paper, measuring equipment for arcs which are caused by losing contact between a pantograph and a catenary in the electric train, TTX, was designed and we actually measured arcs of current and voltage at 2007. 5. 16$\sim$ 17, 2007. 5. 31, 2007. 6. 18$\sim$ 19 and 2007.6. 30$\sim$ 31, a total of 4 times. The TTF tool was made by LabVIEW software and the actually measured arc data were analyzed by the FFT tool. The analysis result showed that the arc current and voltage contains much harmonic, so we must consider problems of EMS and EMI in the main circuit system of the electric train TTX. -
Dissolved gases analysis (DGA) is one of the most useful techniques to detect incipient faults in power transformers. Criteria interpreting DGA result is the most important. Because of difference of operation environment, construction type, oil volume, and etc, the interpretative criteria of DGA at KEPCO must be different with other standard like IEC-60599, Rogers and Doernenburg. In this paper, we collected the DGA data of the normal condition transformers and the incipient fault transformer to suggest the most appropriate criteria. Using these data, this paper suggests appropriate condition classification algorithm. Suggested algorithm can help to detect incipient fault earlier without unnecessary sampling.
-
Since the residential load is an AC load and the output of solar cell is a DC power, the photovoltaic system needs the DC/AC converter to utilize solar cell. In case of driving to interact with utility line, in order to operate at unity power factor, converter must provide the sinusoidal wave current and voltage with same phase of utility line. Since output of solar cell is greatly fluctuated by insolation, it is necessary that the operation of solar cell output in the range of the vicinity of maximum power point. In this paper, DC/AC converter is three phase PWM converter with smoothing reactor. And then, feedforward control used to obtain a superior characteristic for current control and digital PLL circuit used to detect the phase of utility line.
-
This study examines the characteristics of noise occerred at a hydroelectric power plant by using the on-line partial discharge measured by eletrical detecting method under the high voltage rotating machines. In addition, it analyzes the noise pattern into frequency and its scale component by using the FTT technique.
-
Countries in the world are setting up policies to implement anti-global warning measures to actively cope with the Agreement on Climate Change. Rising problems related to energy and environment prompted research and development efforts to highly efficient electric instrument and environmentally friendly products to secure resources and save energy Korea's high dependency on imported energy and its lack in natural resources make it urgently necessary to develop energy efficient instrument and equipment that can save energy. Every household now uses a transformer, which is very important instrument among others. A variety of technologies to manufacture transformers are currently used along with efforts to develop new materials. Development nit of high efficient transformers is called for by the time and has direct economic impact on suppliers and consumers. In addition, it is desirable to install a transformer that is trustworthy, secure, low on loss, anti-incident capable, small, anti-flammable, environmentally friendly, cost-efficient high-frequency resistant and easy for maintenance. To do this, it is necessary to look deeper into a highly efficient transformer that can save energy. This paper will discuss the types and characteristics of various transformers and propose ways to save energy and raise efficiency tv analyzing a environmentally friendly amorphous transformer.
-
Ko, Jae-Sub;Choi, Jung-Sik;Jung, Byung-Jin;Kim, Do-Yeon;Park, Ki-Tae;Choi, Jung-Hoon;Chung, Dong-Hwa 295
This paper presents the photovoltaic(PV) water pumping system with a maximum power point tracking(MPPT). The wale- pumping system uses a variable speed single phase induction motor(SPIM) driven a centrifugal pimp by field oriented control(FOC) inverter. The MPPT using a DC-DC converter controlled the duty cycle to track maximum power from PV under different insolation conditions. The duty cycle directly relate with a flux producing current control($i_{ds}$ ). The FOC inverter uses a current control voltage source inverter(CC-VSI). The simulation results are shown that the characteristics and performance of drive system, which varies as each conditions of light by expresses in voltage ($V_{dq}$ ), current($I_{dq}$ ), speed of motor and torque. -
Choi, Jung-Sik;Ko, Jae-Sub;Jung, Byung-Jin;Kim, Do-Yeon;Park, Ki-Tae;Choi, Jung-Hoon;Chung, Dong-Hwa 301
This paper is proposed by fuzzy-based MPPT control of photovoltaic to drive induction motor. Design and prototype implement of a fuzzy logic(FL) controller for maxim]m power extraction from a stand-alon photovoltaic Is proposed in this paper. Error and the change of error between maximum power and real power are used by input of fuzzy controller. Moreover, it output changing of voltage from control constant. The validity of this paper is proved by comparing maximum power point tracking and performance of motor drive through comparison fuzzy and PI of tradition method. -
Jung, Byung-Jin;Ko, Jae-Sub;Choi, Jung-Sik;Kim, Do-Yeon;Park, Ki-Tae;Choi, Jung-Hoon;Chung, Dong-Hwa 307
The paper is proposed artificial neural network(ANN) sensorless control of induction motor drive with fuzzy learning control-fuzzy neural network(FLC-FNN) controller. The hybrid combination of neural network and fuzzy control will produce a powerful representation flexibility and numerical processing capability. Also, this paper is proposed speed control of induction motor using FLC-FNN and estimation of speed using ANN controller The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The error between the desired state variable and the actual one is back-propagated to adjust the rotor speed, so that the actual state variable will coincide with the desired one. The proposed control algorithm is applied to induction motor drive system controlled FLC-FNN and ANN controller, Also, this paper is proposed the analysis results to verify the effectiveness of the FLC-FNN and ANN controller. -
Kim, Do-Yeon;Ko, Jae-Sub;Choi, Jung-Sik;Jung, Byung-Jin;Park, Ki-Tae;Choi, Jung-Hoon;Chung, Dong-Hwa 313
Interior permanent magnet synchronous motor(IPMSM) has become a popular choice in electric vehicle applications, due to their excellent power to weight ratio. This paper proposes maximum torque control of IPMSM drive using adaptive fuzzy neural network controller and artificial neural network(ANN). This control method is applicable over the entire speed range which considered the limits of the inverter's current and voltage rated value. For each control mode, a condition that determines the optimal d-axis current$i_d$ for maximum torque operation is derived. This paper considers the design and implementation of novel technique of high performance speed control for IPMSM using Adaptive-FNN controller and ANN controller. The hybrid combination of neural network and fuzzy control will produce a powerful representation flexibility and numerical processing capability. Also, this paper reposes speed control of IPMSM using Adaptive-FNN and estimation of speed using ANN controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The proposed control algorithm is a lied to IPMSM drive system controlled Adaptive-FNN and ANN controller, the operating characteristics controlled by maximum torque control are examined in detail. Also, this paper proposes the analysis results to verify the effectiveness of the Adaptive-FNN and ANN controller. -
In the development of paralleling techniques, Multi-Phase Interleaved(MPI) converter constitutes one of the most promising alternatives reported in the last years. This technique consists of a phase shifting of the control signals of several cells in parallel operating at the same switching frequency. As a result, the aggregated input and output current waveform exhibit lower ripple amplitude and smaller harmonics content than in synchronous or stochastic operation modes. Based on the inherent advantages of the MPI converter, in this paper, a control scheme, which can reduce current and voltage rifle, is proposed for PEMFC generation systems. The MPI boost converter is composed of several identical boost converters connected in parallel.
-
Mun, Sang-Pil;Lee, Hae-Su;Nakaoka, Mutsuo;Jeong, Jang-Geun;Kim, Chang-Il;Jo, Gil-Je;Kim, Sang-Don 323
In this paper, the basic experiment, electrolytic cell design and basic manufacturing have been made to interpret the characteristics of Hydrogen-Oxygen-Gas-Generator. As for the detailed matters, the data research on basic technology on Hydrogen-Oxygen-Gas and analysis on characteristics of Hydrogen-Oxygen-Gas from basic experiment. Also the experiment of characteristics and comparative evaluation between constant current source using SCR converter from existing method and constant current source using new phase shift PWM control method converter. As results when it has injected constant DC current, we has compared Gas quantities by variable ripple frequencies using phase shift PWM control method converter. Therefore, in linear region, it has not different Gas quantities by constant DC current and by phase shift PWM control method converter. Also, it has increased Gas quantities wilder linear region when put ripple frequency at saturation region. Through, Gas quantities and input rower, it has acquired higher input power per Gas quantities at put pulse current. Therefore, when designing converter or inverter for electrolysis, which has ripple current. -
Inundation of substation and underground power equipment(pad-mounted transformers & switches) breaks out every summer season in low-lying downtown and low-lying shore by localized heavy rain, typhoon and tidal wave. In case inundation of substation and underground power equipment, it occurs a great economic loss owing to recovery time and events of electric shock occur by inundation electrical facility. So we search the damage situation and installation situations. Therefore we propose the necessity of protection of flood at low-lying downtown and low-tying shore. This paper will be used to present a reform proposal of electrical related law about flood protection of existing power equipment.
-
This paper deals with assessment of potential interference between grounding electrodes using ETM(Electrolytic Tank Modeling) method. When a test current flowed through grounding electrode, potential rise was measured and analyzed using an electrolytic tank in real time. In order to analyze the potential interference between grounding electrodes, ETM method was studies. Potential interference between isolated grounding electrodes was evaluated as functions of the separation distance between grounding electrodes and the configuration of grounding electrode to be induced. It was found that the separation distance between grounding electrodes in reducing the potential interference was a major factor.
-
In the dissertation, a power conversion system for fuel cell is composed of a PWM inverter with LC filter in order to convert fuel cell voltage to a single phase 220[V], In addition, new insulated DC-DC converters are proposed in order that fuel cell voltage is boosted to 380[V]. In this paper, it requires smaller components than existing converters, which makes easy control. The proposed DC-DC converter controls output power by the adjustment of phase-shift width using switch S5 and S6 in the secondary switch, which provides 93-97[%] efficiency in the wide range of output voltage. Fuel cell simulator is implemented to show similar output characteristics to actual fuel cell. Appropriate dead time td enables soft switching to the range where the peak value of excitation current in a high frequency transformer is in accordance with current in the primary circuit. Moreover, appropriate setting to serial inductance La reduces communication loss arisen at light-load generator and serge voltage arisen at a secondary switch and serial diode. Finally, TMS320C31 board and EPLD using PWM switching technique to act a single phase full-bridge inverter which is planed to make alternating current suitable for household.
-
교토의정서(Kyoto Protocol)는 1997년 일본 교토에서 채택되어 2005년 2월에 공식 발효되었다. 우리나라는 현재 온실가스 감축의무 부담이 없지만 2013년부터 감축의무가 거의 확실시되고 있는 상황이다 국내 온실가스 배출량의 25%를 차지하는 발전산업은 화석연료를 사용하고 있어 전력생산에 따른
$CO_2$ 배출량의 계산은 매우 중요한 일이 되었다. 본 논문은 - D발전소의 성능시험에 대하여 기술하고, - 성능시험 결과 얻어진 D발전소 성능시험 Data a, b, c 특성계수를 이용, LNG와 중유 연소시 각각 연료소모량에 대한$CO_2$ 대기 배출량을 계산 비교하였으며, - 화학적인 방법에 의한$CO_2$ 대기 배출량 산정방법을 간략히 언급하였다. -
본 논문에서는 전력케이블 및 그 부속설비에 대한 사고원인을 분석한 사례를 서술하였다. 사고원인을 정밀하게 분석하기 위해서 케이블 외관의 육안검사 단계부터 케이블 해체 단계까지 전기적 검사 및 화학적 검사를 실시하였다. 분석결과, 전력케이블은 시공방법을 준수하지 않아서 수축튜브의 마감부위에 전계가 집중되어 가압 이후 지속적인 부분방전이 발생하여 케이블에 누적된 스트레스로 인해 발생한 고장으로 추정되었다.
-
The Properties of Breakdown and Test for Resistance to Cracking of Power Cable for PL CountermeasureIt is impossible to database(DB) the patterns of cable events and cause analysis of faulted cable because the product liability(PL) law have been enforced in Korea, since 2002. In additions, simulation and pattern of cable events are needed for DB system under accelerated deterioration. In this paper, we tested for resistance to nicking of cable below the 22.9kV class due to thermal stresses. This method of exam is following IEC 60811-3-1(Common test methods for insulating and sheathing materials of electric cables). First of all, set the cable in the thermal stress instrument, temperature changed from -20 degree to 120 degree. After thermal stress, we observed a surface crack of cable through microscope and carried out AC withstand voltage test.
-
A study to assess and show applications of the reliability compliance result of the new technology product of the lighting unit designed for end-to-end(or continuous row mounting) mounting has resented in this paper, we have taken the internal wiring included through-wire and other reliability compliance test result of the KTL(Korea Testing Laboratory), KETI(Korea Electric Testing Institute) and KESCO(Korea Electrical Safety Corporation). All of the these reliability compliance test results for the lighting unit designed for end-to-end mounting, named Lite-Way, are able to exactly be given more engineering and construction additional applications.
-
This paper demonstrates a novel application of Fuzzy C-Mean(FCM) to identify the causes of ground faults in Transmission system. The discrimination scheme which can automatically recognize the fault causes is proposed using artificial neural networks. By using the actual fault data, it is shown that the proposed method provides satisfactory results for identifying the fault causes.
-
무(無)정전을 요구하는 특정대상의 중요 전기시설에서, 신뢰도 낮은 수전방식의 정전 가능성 대책으로 대용량의 UPS와 비상발전기를 설치 운영 중에 있다. 근래에 와서 상용전원과 발전기 또는 복수의 발전기에 CTTS (Closed Transition Transfer Switch)를 무(無)정전 전환개폐기 전용으로 사용하고 있다. 본 논문에서 CTTS를 신뢰도 높은 상용2회선 수전방식의 수전변압기 2차 측에 적용한 새로운 무(無)정전 전원설비 구축 방안을 제안하였다. 그 결과 수전설비 구성 간략화와, UPS 비상발전기 설치 최소화로 공간 및 투자절감 효과를 얻을 수 있다.