Proceedings of the Korea Institute of Convergence Signal Processing (융합신호처리학회 학술대회논문집)
The Korea Institute of Convergence Signal Processing (KICSP)
- 기타
Domain
- Electricity/Electronics > Weapon/Ordnance Sensor and Control
2003.06a
-
의료영상의 분할은 의료영상을 컴퓨터 진단 및 가시화에 필요한 같은 성질을 가진 여러 조직으로 나누어주는 방법이다. 즉 입력되어진 영상을 처리하여 유사한 화소들의 집합인 영역들로 화소들을 구분하는 작업이며 영상분할의 결과는 영상인식의 정확성에 큰 영향을 미친다. MRI(Magnetic Resonance Imaging)으로부터 정상적인 세포조직 또는 뇌종양과 같은 비정상적인 세포조직의 가시화와 분석을 위해서는 대상 세포조직의 적절한 분류를 필요로 한다. 하지만 기존의 영역 검출 방법으로는 잡음이 섞여 있는 영상에서 여러 가지의 처리과정(주로 잡음 제거)이 필수적이고 그런 과정으로 인해 정확한 영역 검출이 힘들게 된다. 이에 잡음이 있더라도 이를 제거하기 위한 처리가 필요 없이 영역기반으로 필요한 파라미터의 추정을 통한 MRF(Markov Random Field)를 이용하여 보다 효율적이고 정확하게 MRI에서 질환 영역을 검출할 수 있다.
-
본 연구는 화자 적응 시스템을 구축하기 위한 전과정으로서, 음성 인식 단위로, 음소를 이용할 경우 화자 적응 변화에 대한 연구이다. 음소 변화에 따른 가중치를 적응시켜 화자 적응을 하기 위하여, 본 연구에서는 인식 시스템으로 반연속 HMM, 화자 적응 방법으로는 최대사후확률추정법과 음성선형특성을, 인식 대상 단어로 10개의 격리 숫자음을 사용하였다. 상기의 화자 적응 방법들은 교사 없는 학습이 가능한 것으로서, 온라인 시스템에서 사용이 가능하다. 이 두 방법을 수행한 결과 두 번째 방법보다 첫 번째 방법의 결과가 더 나은 인식률을 보였으며, 두 방법 모두 결합하여 인식 실험을 한 결과가 각각의 화자 적응 방법을 독립적으로 수행한 결과보다 좋은 결과를 얻을 수 있었다. 또한 가중치에 따른 화자 적응 결과 음소에 따른 변동 가중치를 사용할 경우가 고정된 가중치를 이용한 것보다 우수한 결과를 보였다.
-
본 연구는 어휘 정보를 이용하여 구어체 문장구성을 하였다. 구어체 문장구성의 목적은 언어생활이 불편한 사람들을 위한 통신보조기기에 사용하기 위해서이다. 통신보조기기는 사용자가 원하는 문장을 만들어 음성으로 출력해주는 시스템이다. 그러므로 문장을 구성하기 위해서 어휘 정보를 통신보조기기의 개념에 맞도록 변형하여 도입하였다. 어휘는 도메인별로 발췌하고 분류하였으며, 각 어휘에 대해 시소러스와 하위범주화사전을 만들었다. 어휘정보에 관한 상세한 정보는 문장구성과 재사용 그리고 문맥상 어색한 문장검출을 위해 중요한 자료가 된다.
-
웨이블릿 변환 영역에서 잡음제거 방법 중 Visushrink 추정에 사용되는 경계값은 측정 데이터 수와 잡음편차에 비례하는 것으로 알려져 있으나 잡음편차가 알려지지 않은 경우 Donoho는 웨이블릿 변환 영역의 최고대역에서 잡음편차 추정 방법을 제시하였다. 본 논문에서는 분산이 데이터 수에 반비례함을 이용하여 threshold 기법을 이용하여 잡음제거 시 계산량을 감소를 목적으로 차 신호를 이용하여 측정데이터 수를 줄인 후 영상신호의 가우시안 잡음을 soft threshold 기법을 적용하고 이 기법의 실용성을 밝혔다.
-
In general it has been considered to be the difficult problem that we divide continuous speech into short interval with having identical phoneme quality. In this paper we used Gaussian Mixture Model (GMM) related to probability density to divide speech into phonemes, an initial, medial, and final sound. From them we peformed continuous speech recognition. Decision boundary of phonemes is determined by algorithm with maximum frequency in a short interval. Recognition process is performed by Continuous Hidden Markov Model(CHMM), and we compared it with another phoneme divided by eye-measurement. For the experiments result we confirmed that the method we presented is relatively superior in auto-segmentation in korean speech.
-
본 논문에서는 카메라로부터 받아들인 정보를 이용하여 사람을 추적하는 방법을 제안하였다. 기존의 방법들은 물체가 복잡한 형태로 겹치거나 분리될 때 처리할 수 있는 방법이 미비하였다 본 논문에서는 물체의 위치와 칼라 정보를 이용하여 겹침이나 분리가 있는 경우 견고한 추적을 행하고 명확하지 않은 분리가 생길 경우 가설을 설정하여 가설이 풀릴 때까지 물체를 계속 추적해 나가는 방법을 제안하였다.
-
최근 컴퓨팅 환경의 동향은 사람과 컴퓨터간의 좀더 자연스러운 인터페이스와 사용자의 눈에 보이지 않는 하드웨어의 계발이다. 디지털 데스크는 이 두 아이디어가 결합된 컴퓨팅 환경의 대표적인 예이다. 즉, 디지털 데스크에서 아무 장치도 하지 않은 사용자의 fingertip을 컴퓨터의 입력 장치로 사용하는 것이다. 본 논문은 디지털 데스크에서 사용자 fingertip의 이동경로를 추출하고, 추출된 이동경로로 symbolic gesture를 인식하는 방법을 제안한다. 제안된 방법은 Fingertip tracker, Gesture mode selector, 그리고 Symbolic gesture recognizer 세 개의 모듈로 구성된다. Fingertip tracker는 카메라로부터 입력되는 영상에서 사용자 fingertip의 이동경로를 추출하고, Gesture mode selector는 추출한 fingertip의 이동경로가 symbolic gesture인지를 구분한다. Symbolic gesture recognizer는 추출된 fingertip의 이동경로로 symbolic gesture를 인식한다. 이 방법을 문서교정 부호를 인식하여 전자문서를 교정하는 시스템에 적용해 본 결과 좋은 인식 결과를 얻을 수 있었다.
-
영상 검지기를 통한 차량 탐지 방법은 날씨와 같은 환경에 민감하게 반응하여 차량의 미탐지 및 오탐지가 발생하게 된다. 이를 해결하기 위해 다양한 일기조건하에서 차량 추적 방법에 대해 제안한다. 다양한 일기 조건하에서의 차량 추적은 눈, 비, 안개 환경에서 각 날씨의 특징을 분석, 반영하여 차량을 탐지하고 추적한다. 눈이 내리는 환경에서는 눈이 카메라 가까이에서 차량 blob으로 잘못 탐지되는 blob을 제거하기 위해 카메라와의 거리에 따른 실제 크기를 구하는 size filtering 방법을 사용한다. 비, 안개 환경에서는 흐릿해진 영상 때문에 차량이 교통신호등에 의해 차량 정체시 여러 차량이 하나의 blob으로 탐지되는 문제점을 해결하기 위해 이전 영상에서의 차량 위치 정보를 이용한 재 blob화 방법을 사용한다.
-
본 논문에서는 가역변환 (reversible transform)에 기반을 둔 가역 워터마킹 기법에 관해 기술한다. 워터마크를 삽입한 후 원본 데이터에 영구적으로 남아있는 기존의 워터마킹 기법과는 달리 가역 워터마킹 기법의 경우, 컨텐츠의 인증이 이루어진 후 삽입되었던 워터마크 신호를 컨텐츠로부터 제거함으로써, 원 영상을 화소단위로 무손실 복원할 수 있는 특징이 있다. 본 논문에서는 가역 변환인 Haar 웨이블릿 변환(Haar Wavelet Transform) 이용하여 원 영상을 변환한 후 웨이블릿 계수를 이용하여 워터마크를 삽입 및 추출한다. 이러한 가역워터마킹 기법은 판사 목적의 영상 혹은 의료영상과 같은 민감한 영상신호처리가 요구되는 분야로 응용될 수 있을 것이다.
-
현재 전세계적으로 데이터마이닝을 위해 많은 종류의 알고리즘이 사용되고 있으나 사용되는 알고리즘의 정확한 이해 없이는 데이터마이닝 결과를 올바르게 해석할 수 없다. 이러한 측면에서 중요한 의사 결정목 생성 알고리즘의 하나인 ID3의 원리를 다루었고, 이를 실세계에서 가장 널리 사용되고 있는 관계형 데이터베이스에 성공적으로 적용하기 위한 훈련 예의 생성 방법 및 연속치를 취급하는 방법을 제시한다.
-
일반적으로 영상내의 중요한 정보는 객체 영역에 많이 포함되어 있다. 객체 영역 우선 전송 방법은 영상의 전 영역에 대해 동일한 중요도로 전송하는 일반적인 점진적 부호화 방법과는 달리 객체 영역만을 우선적으로 부호화 하여 전송하기 때문에 짧은 시간 내에 원 영상을 보다 빨리 파악할 수 있다. 따라서 본 논문에서는 양방향 반올림 필터를 이용한 MRWD기반 객체 영역 우선 전송 기법을 제안한다. 제안한 방법은 양방향 반올림 필터에 의해 객체 영역을 추출한 후, MRWD를 이용하여 부호화를 수행하므로, 객체 영역의 웨이브릿 계수들을 우선 전송함으로써 매우 낮은 비트율에서 영상내의 중요 정보를 파악할 수 있다. 따라서, 인터넷상에서 사용자가 영상을 검색할 경우 보다 빨리 원하는 정보를 파악할 수 있어 검색 시간과 검색 효율을 개선시킬 수 있다.
-
The use of confidence measures for word/utterance verification has become art essential component of any speech input application. Confidence measures have applications to a number of problems such as rejection of incorrect hypotheses, speaker adaptation, or adaptive modification of the hypothesis score during search in continuous speech recognition. In this paper, we present a new utterance verification method using vowel string. Using subword HMMs of VCCV unit, we create anti-models which include vowel string in hypothesis words. The experiment results show that the utterance verification rate of the proposed method is about 79.5%.
-
본 논문에서는 multi-camera를 이용한 인터넷 기반의 지능적 감시 시스템을 제안한다. 제안된 시스템은 두 종류의 카메라, static camera와 pan-tilt camera, 를 이용하여 출입구를 감시하고, 비인가자를 추적한다. static camera는 출·입을 검출하고 출입자를 인가자와 비인가자로 분류하는데 이용되고, pan-tilt camera는 비인가자로 분류된 출입자를 추적하는데 이용된다. 제안된 시스템은 세 가지 단계: 출입구 감시, 출입자 검출 및 분류(인가자/비인가자), 비인가자 추적으로 구성된다 출입구 감시는 출입문의 밝기값 변화를 이용한다 출입자 검출 및 분류는 skin color 모델과 얼굴 크기, 위치와 관련된 휴리스틱을 이용하여 얼굴을 검출하고, PCA(Principal Component Analysis)를 이용한 eigenspace상에서의 유클리디언 디스턴스로 템플릿 얼굴과 입력 얼굴의 유사도를 계산하여 인가자인지 비인가자인지 분류한다. 비인가자 추적은 pan-tilt 카메라를 이용하여, static camera에서 분류된, 비인가자의 움직임을 검출하고 카메라를 제어함으로써 추적한다 제안된 시스템은 무인 감시 상황에서 비인가자의 출입시 감시자에게 경고 신호를 제공하고, 감시지역에서 사건 발생시, 사건의 개요를 파악하는 중요한 정보를 빠른 시간에 제공할 수 있다는 장점을 가진다.
-
본 논문에서는 멀티웨이브릿 변환영역에서 통계적 모델과 지각적 동조특성을 이용한 적응적 디지털 워터마킹 기법을 제안한다. 워터마크는 4레벨로 분해된 멀티웨이브릿 변환영역에서 최저주파 영역과 최고주파 대역들을 제외한 중간 및 고주파 영역에, 인간 시각 시스템(human visual model BWS)을 이용한 JND(just noticeable difference) 특성과 NVF(noise visibility function)를 이용한 통계적 특성을 기반으로 정상상태 가우시안 모델과 비정상상태 가우시안 모델에 따라 지각적 동조 특성을 이용하여 적응적으로 삽입된다. 실험 결과 제안한 방법에서 에지나 텍스쳐 영역에 더 강하게 삽입할 수 있었고, 평탄영역에서 보다 적응적으로 은닉할 수 있었으며 정상상태 가우시안 모델에서 지각적 동조특성을 이용한 방법이 더 우수한 비가시성과 강인성을 확인하였다.
-
In this study, a planar respiratory motion is modeled by a 2-D linear expanding-shrinking movement. According to the introduced model, respiratory motion imposes phase error, non-uniform sampling and amplitude modulation distortions on the acquired MRI data. When the motion parameters are known or can be estimated, a construction algorithm based on superposition method was used to remove the MRI artifact. For the purpose of estimating unknown motion parameters, we used the spectrum shift method to find the respiratory fluctuation function, the x directional expansion coefficient and its center, and we also used the minimum energy method to find the y directional expansion coefficient and its center. Finally the effectiveness of this presented method is shown by computer simulations.
-
We propose an algorithm for almost unsupervised detection of linear structures, in particular, axes in road network and river, as seen in synthetics aperture radar (SAR) images. The first is local step and used to extract linear features from the speckle radar image, which are treated as road segment candidates. We present two local line detectors as well as a method for fusing information from these detectors. The second is global step, we identify the real roads among the segment candidates by defining a Markov random field (MRF) on a set of segments, which introduces contextual knowledge about the shape of road objects.
-
웨이블릿 변환이 소개된 후, 웨이블릿 임계치 기법이 신호의 잡음제거에 중요한 효과를 가져왔다. 그러나 웨이블릿 임계치 잡음제거 기법 역시 불연속점 주위에서 의사깁스 현상을 일으키는 단점을 가지고 있다. 본 논문은 웨이블릿 발자국 흔적(Wavelet Footprints) 알고리즘을 소개한다. 웨이블릿의 시간영역에서의 특이점들에 의해 남겨진 흔적이라는 의미를 가지는 발자국 흔적의 새로운 개념을 도입하여 불연속 주위의 의사 깁스 현상을 개선하고자 한다. 제안된 알고리즘은 더 일반적인 신호들로 확장되어지고, 신호의 잡음제거와 같은 문제에 효과적인 해법을 제시 할 수 있다.
-
기존의 영상검지기는 한정된 구간에서 차량을 추출, 추적하는데 본 논문에서 제안한 카메라간 연계 추적 방법은 두 대의 카메라를 서로 연계하여 차량을 추적함으로써 넓은 구간에서도 효과적으로 차량을 추적할 수 있다. 한 대의 카메라는 전방을 검지하고 다른 카메라는 후방을 검지하여 전방 검지영역에서 추적한 차량을 후방 검지영역에서도 연계하여 추적하게 된다. 연계 추적을 위해 전방 카메라에서 취득한 차량의 차선정보와 차량의 대표 gray level 정보를 후방 카메라로부터의 영상 분석시 이용하여 차량 연계 추적을 한다.
-
본 논문에서는 자연스러운 온라인 필기체 문자 인식을 위하여 획 기반 HMM(Substroke HMM)을 기반으로 한 인식 방법을 채택하고, 획 분류의 정확도 향상을 위한 전처리 과정에 대해 재샘플링 간격 조정을 통한 획 분류실험을 통해 인식률 제고에 관한 실험을 수행하였다 필기체 문자인식을 위한 방법으로 한 문자 전체를 HMM으로 구성하는 Whole-character HMM과 자소단위를 HMM으로 구성하는 character HMM을 주로 이용하였으나, 이러한 방법은 문자의 수에 비례하여 비교적 큰 메모리 용량과 계산량이 요구되는 단점이 있다. 이러한 단점을 개선하기 위한 획 기반 HMM은 문자를 획 단위로 분류한 후 이를 HMM 모델로 구성하므로 소수의 획 기반 HMM 모델만으로 문자를 모두 표현할 수 있는 장점을 가지고 있어, 인식률의 큰 저하 없이 계산량 및 메모리 용량을 크게 줄일 수 있다. PDA상에서 수집한 완성형 한글 데이터베이스를 사용하여 획 분류 실험을 수행한 결과 평활화와 7/100 길이의 재샘플링을 수행한 경우 평활화 과정을 추가하지 않은 기존의 재샘플링 5/100 길이의 경우에 비해 정확도가 평균 3.7% 향상을 나타내었으며, 특히 첨가 에러율이 감소함을 확인할 수 있다.
-
본 논문은 SVM(support vector machine)을 이용한 음성인식기에 대해 효과적인 특징 파라메터를 제안한다. SVM은 특징 공간에서 비선형 경계를 찾아 분류하는 방법으로 적은 학습 데이터에서도 좋은 분류 성능을 나타낸다고 알려져 있으며 최적의 특징 파라메터를 선택하기 위해 본 논문에서는 SVM을 이용한 음성인식기를 사용하여 PCA(principal component analysis), ICA(independent component analysis) 알고리즘을 적용하여 MFCC(met frequency cepstrum coefficient)의 특징 공간을 변화시키면서 각각의 인식 성능을 비교 검토하였다. 실험 결과 ICA에 의한 특징 파라메터가 가장 우수한 성능을 나타내었으며 특징 공간에서 각 클래스의 분포도 또한 ICA가 가장 높은 선형 분별성을 나타내었다.
-
This paper proposes a preprocessing method for tracking aircraft's take-off and lading. The method uses accumulative difference image technique for segmenting the object from the background, and obtains the centroid of the object exactly using centroid method. Then the moving object is analyzed and represented with the information such as feature point, velocity, and distance. A simulation result reveals that the proposed algorithm has good performance in segmenting and tracking the aircraft.
-
타일링을 통해 손실 압축된 데이터에 대해 점대칭 확장(point symmetric extension)을 사용하면 경계에서의 인공물(artifact)들을 줄일 수 있다 실제 확장 샘플 없이 경계 필터(boundary filter)를 사용하는 것과 같은 효과를 내는 방법을 리프팅(lifting)을 사용하여 수행할 수 있다. 본 논문에서 사용된 필터는 PR 특성을 준수하고, 경계근처에서 어떠한 후처리 기술이나 이웃하는 타일들로부터의 추가정보 없이 경계 인공물들을 현저히 감소시켰다.
-
본 논문에서는 watershed segmentation을 이용해서 특정한 영역의 윤곽선정보를 바탕으로 영상을 추출하는 방법을 제안한다. 일반적인 영역추출방법에는 폐곡선을 이용한 영역추출방법, snake라 불리는 에너지 최소화를 이용한 active contour 방법 등 여러 가지가 있다. 특히 이러한 방법에는 연산시간이 많이 걸린다는 단점이 있는데, 이러한 문제점을 해결하기 위해서 canny edge detector를 사용하여 윤곽선 정보를 추출하고, watershed segmentation으로 영상을 분할한 후 윤곽선 정보를 이용해서 특정 영상의 영역에 대한 부분을 병합하여 추출하는 방법을 사용하였다. 제안하는 방법으로 기존의 추출 방법중의 하나인 levelset과 비교 실험한 결과 거의 동일한 영상의 결과를 얻을 수 있었으며 연산시간을 줄일 수 있었다.
-
본 논문에서는, 웨이브렛 변환과 잡음 섞인 숫자 영상에 대한 최적화 인식 훈련기법을 사용한 다계층 신경망을 제안하고, 이 시스템을 아라비아숫자 인식에 적용한다. 웨이브렛 변환을 이용해 원 영상 정보의 중요한 부분은 최대한 보존하면서 입력벡터의 크기를 줄임으로써 신경망의 노드 수와 학습 수렴시간이 줄어들도록 하였고, 최적화 인식 훈련기법은 데이터의 잡음을 점차적으로 높여가면서 훈련벡터에 적용, 인식률의 변화에 대해 살펴보았다. 잡음이 섞인 숫자 영상의 인식율을 높이기 위해 원 영상에 0, 10, 20, 30, 40, 50㏈의 잡음을 섞은 영상을 훈련에 함께 사용하였다. 테스트 영상에 잡음이 30∼50㏈정도 섞였을 경우에는 원 영상만을 훈련에 이용했을 패와 잡음이 섞인 영상을 이용하여 훈련시켰을 경우에 인식율의 차이가 별로 없지만, 0∼20㏈정도 섞인 영상을 테스트에 사용할때에는 0, 10, 20, 30, 40 , 50㏈의 잡음이 있는 영상을 훈련에 사용했을 때가 원 영상만을 훈련에 이용했을 경우에 비해 인식율이 9% 향상된다.
-
본 논문에서는, 패턴 인식시 데이타의 최적의 특성을 구성할 수 있는 새로운 신경망 구조인 적응적 트리맵을 제안한다. 유전 알고리즘을 사용한 적응적 트리맵(adaptive tree map ATM)은 데이터의 특징에 대한 중요도를 유전 알고리즘으로 구성하고, 특징의 우선 순위에 따라 트리구조를 도입하고 데이터의 유사성에 따라 신경망의 뉴런이 분리, 병합 될 수 있다. 패턴인식의 인식률에 영향을 미치는 인자 중에서 가장 중요한 특징은 연구자의 선택에 의하여 사용되거나 무시될 수 있으며, 반복적인 실험을 통하여 적절한 특징을 사용할 수 있으나 최적의 특징은 될 수 없다. 그러나 본 논문에서 제안한 ATM을 이용하면 블랙박스로 구성된 적응적인 시스템을 이용하여 원하는 출력을 얻을 수 있게 된다.
-
Up to the present studies of the car number recognition system, it is generally known to have serious problems such as relatively long processing time due to the excessive length of data extracted from the number plate based on the current image characteristics, and the image blurring with the physical damage of the brightness and darkness signals of the number plate caused by external impulses with many difficulties in the extraction of the highlighted numbers. In this Paper we used the characteristics firstly having a constant brightness of number plate, and a high density to the horizontal axis, and the influences of highlighted signal could be reduced by making reflections less through the polarized filter on the camera for any highlighted signal. For the more, the data processing time and the noise reduction are effectively implemented by using the wavelet transform of time-space scale with the considerations on the physical loss and processing time.
-
This paper presents a hue preserving gamut mapping algorithm for color monitor and printer. The gamuts of monitor and printer are set by the profile of color reproduction media, specified by ICC(International Color Consortium) and provided by vendors, then those gamuts are represented on the CIE xy color space. In case that the color of monitor are located on out-of-gamut of printer, these are clipped on the point of gamut boundary of printer towards a reference white point. On the other hand, colors are in-gamut of printer are unchanged. An image generated by the algorithm keeps a ratio of each pixel of original image. Advantages of the algorithm are easy to implement and fast processing time than other algorithms which involve hue preserving especially in CIELAB color space.
-
In this paper, the multi-channel high speed data acquisition system is implemented. This high speed signal processing system for 3-D image display is applicable to the manipulation of a medical image processing, multimedia data and various fields of digital image processing. In order to convert the analog signal into digital one, A/D conversion circuit is designed. PCI interface method is designed and implemented, which is capable of transmission a large amount of data to computer. In order to, especially, channel extendibility of images acquisition, bus communication method is selected. By using this bus method, we can interface each module effectively. In this paper, 32-channel A/D conversion and PCI interface system for 3-dimensional and real-time display of the retina image is developed. The 32-channel image acquisition system and high speed data transmission system developed in this paper is applicable to not only medical image processing as 3-D representation of retina image but also various fields of industrial image processing in which the multi-point realtime image acquisition system is needed.
-
본 논문에서는 video stream내의 움직이는 객체 정보를 추정하고 동적 GTM(genetic tree-map) 알고리즘을 사용하여 얼굴 영역 검출 기법을 제안한다. 기존의 일반적인 객체 추정 기법은 클러스터(cluster)과정을 통하여 영상 정보를 분할하고 그 중 움직이는 객체 부분을 복원함으로서 추정하였다. 제안하는 기법은 BMA(block matching algorithm)[1] 알고리즘을 사용하여 video stream 에서 움직이는 객체 정보를 얻고 클러스터 알고리즘으로 PCA(principal component analysis)를 사용한다. PCA 기법은 입력 데이터에 관해 통계적 특성을 이용하여 주성분을 찾는다. 주축과 영역분할 알고리즘을 사용하여 데이터를 분할하고, 분할된 객체 정보를 사용하여 특정 객체만을 추정하는 것이 가능하다. 이렇게 추정된 객체를 얼굴영역의 feature에 대하여 신경망 학습인 동적 GTM 알고리즘을 사용하여 생성된 동적 GTM 맵의 정보에 따라 객체의 얼굴영역만을 추출해 낼 수 있다[2-6].
-
본 논문은 동영상 압축 부호화에 대한 표준안인 MPEG기반의 압축 비디오 stream에서[1, 2], 질의 영상에 대한 효율적인 검색 기법을 제안한다. 비디오 검색은 높은 차원의 색인 정보를 이용하는데, 높은 차원의 data set을 색인 정보로 하여 효율적인 검색 능력을 보여주는 KD-Trees(K Dimensional-Trees)알고리즘[3]을 비디오 검색기법에 적용하고자 한다. 먼저, key frame에 PCA (Principal Component Analysis) 알고리즘[4]을 이용하여 색인 정보를 추출한 다음, 추출된 색인 정보를 KD-Trees에 적용하여 효율적인 검색을 가능하게 한다. 실험 결과, 기존의 검색 기법보다 상당한 양의 처리 시간과 메모리 공간을 줄일 수 있음을 보였다.
-
최근 인터넷과 모바일 기기에 대한 소비가 확충되면서 인터넷을 이용하여 기존의 기기를 제어하는 기술을 필요로 하고 있다. 이에 따라 본 논문에서는 모바일 페이지를 만들어서 웹을 통하여 기기를 제어하는 시스템을 디자인하였다. 모바일 웹서버를 이용하여 기기를 제어하는 기술은 그 응용 분야가 홈네트워크, 텔레메틱스 등 넓기 때문에 앞으로 지속적인 연구가 필요할 것으로 보인다.
-
자동 음성 인식(ASR) 시스템에, 끝점 추출과 에너지 정규화는 중요한 역할을 하게 된다 그러나 낮은 SNR이나 nonstationary 환경에서, 기존 방법은 끝점 추출과 에너지 정규화에 있어서 자주 실패하게 되며, ASR을 급격히 열화시키곤 한다. ASR을 수행하기 위해, 최적의 필터에 3상태 천이도를 사용하고, 필터는 정확성과 강인함을 확실히 하기 위해 여러 이론들을 이용하여 설계하였고 여러 가지 잡음이 있는 음성 신호환경에서 거의 일정한 응답을 주었다. 검출된 끝점은 곧바로 에너지 정규화에 적용된다. 실험 결과는 제안된 알고리즘이 낮은 SNR에서 에러율을 크게 감소시키고 있다는 것을 보여준다.
-
본 논문에서는 웨이블렛 압축 기반인 SPIHT 알고리즘의 압축효율을 개선시킬 수 있는 방법을 제안한다. 특히 초기치에서 발생될 수 있는 비트소비를 줄임으로써, 낮은 비트율에서 더욱 빠른 점진적인 전송을 구현하였다. 트리구조에 따르는 최적화 된 임계값 설정과 웨이블렛 변환된 계수들의 계수값을 통해 비트율 향상을 얻을 수 있었다.
-
This paper proposes an algorithm for fingerprint identification using phase only correlation. This algorithm uses the phase of fast Fourier transform and correlation function to calculate the similarity. The algorithm gives very clear result for identification because it shows only one conspicuous sharp peak for the same person's fingerprint. Further, it shows good results even for the finger print images which are printed not clearly and does not need to preprocess the images. It also shows good results for parallel displacement of fingerprint. The experiment result shows the effectiveness of the proposed algorithm.
-
본 연구는 치매노인환자의 생활의 질을 향상시키기 위한 대화시스템의 개발에 목표를 둔다. 제안된 시스템은 주로 세 가지 모듈, 즉, 음성인식, 시간테이블에 의해 구분된 대화 데이터베이스의 자동검색, 그리고 간호사의 녹음음성에 의한 응답 등으로 구성되어 있다. 우선 치매환자가 요양시설에서 자주 발화하는 대화의 내용을 조사하고, 그들의 발화 음성을 인식하고 적절히 응답하도록 구성하였다. 시스템의 평가를 위해서 시스템이 도입되었을 때와 도입되지 않았을 때를 비교, 조사하였다. 시스템이 도입되지 않았을 때는 간호사가 자유로이 케어서비스를 행할 수 있도록 하였다. 비디오 촬영을 통해서 대상자의 행동 및 반응을 조사한 결과, 치매환자의 요구를 충족시키는데 있어서 대화 시스템이 간호사들보다 더 응답적이었다는 것을 알 수 있었다. 게다가, 제안된 시스템은 상호 대화에 있어서 환자가 더 많이 말하도록 유도함을 알 수 있었다.
-
This paper proposes a design method of a CDBC(Continuous-time Deadbeat Controller)system that takes into account the response between the sampling instant and using second-order smoothing elements. The continuous deadbeat controller is composed of a serial integral compensator and a local feedback compensator introduced into the state feedback loop. A DC servo motor is chosen for implementing CDBC algorithm. Especially according to the variable input and disturbance, corresponding CDBC design method is suggested. A Matlab Simulink is used for simulation with the Motor parameter. By computer simulations, control inputs and system outputs are shown to have desirable property such as smoothness.
-
In this paper an nonlinear neuro PID controller is constructed by the control system of general PID controller using a Self-Recurrent Neural Network. And the games of the PID controller in the proposed control system are automatically adjusted by back-propagation algorithm of the neural network. Applying to the position control system, it's performance is verified through the results of computer simulation.
-
플랜트 모델이나 경험에 근거하여 설계된 퍼지제어기를 실제 플랜트에 적용할 경우, 모델링 오차와 플랜트에 대한 관련지식의 부족으로 만족할 만한 제어 결과를 나타내지 못할 경우가 있다. 이 경우 제어성능을 향상시키기 위해 제어기의 제어인자를 다시 조정하여야 하고, 이 조정과정은 시행착오 방법으로 수행되기 때문에 많은 시간과 비용을 필요로 한다. 본 논문에서는 정규화 된 오차와 오차 변화량를 사용하여 플랜트 응답에 따라 입력과 출력의 적절한 스케일 계수를 조정하는 퍼지제어기를 제안한다. 정규화 된 오차를 출력 소속함수의 중심과 폭에 곱해 출력 범위를 재조정하고, 플랜트 응답에 의해 입력의 스케일 계수를 결정한다. 이를 확인하기 위해 2차 플랜트에 적용하여 모의 실험을 수행하였다.
-
This short paper suggests a control strategy using a stepwise fuzzy moving sliding surface. The moving surface is a Sugeno-type fuzzy system that has the angle of state error vector and the distance from the origin in the phase plane as inputs and a first-order linear differential equation as an output. The surface initially passes arbitrary initial states and subsequently moves towards a predetermined surface via rotating or shifting. the proposed method reduces the reaching and tracking time and improves robustness. The asymptotic stability of the fuzzy sliding surface is proved. The validity of the proposed control scheme is shown in computer simulation for a second-order nonlinear system.
-
발전소에서 운전중인 기계들의 안전운전과 예지 보전을 위하여 발전설비의 고장 감지 및 진단과 상태 모니터링은 중대한 역할을 담당하고 있다. 이 연구에서는 설비의 안전하고 신뢰적인 운전을 위한 기계의 작동상태를 사운드 정보로 획득하고 분석하는 시스템을 제안하였다. 사운드 정보의 사용은 적은 양의 채널의 사용으로 많은 기계 및 설비의 이상 유무의 판별을 가능케 하며, 이를 획득하기 위하여 3개의 마이크로폰, 다채널 A/D변환기, 다채널 I/O Sound Card(Soundtrack DSP24) 및 PC로 시스템을 구성하였다. 소프트웨어 개발언어로서 Microsoft Visual C++ 및 MATLAB을 이용하였다. 화력 발전소에 운전중인 주요기계들의 사운드 정보를 취득하여 취득한 기계별 사운드 정보를 이용하여 주파수 특성을 파악하고, 이를 이용하여 기기의 운전 상태진단을 가능하게 한다.
-
This research presents the parallel control scheme of PID servo-driver for shaping of the curved glass. The designed system consists of a PC, main controller and 11 servo-drivers. Each elements are connected by using RS-232C and 8-bit bus communication. In order to guarantee the stability and the control performance, we use the LM629, a precision PID motion controller, and LMD18200, a H-bridge on the servo-drivers. PC calculates position values of 11 DC motors by using the pre-determined curvature value and offers the user interface environment operator.
-
In this paper the design of the model following control system is proposed using the PID control structure. The games of the PID controller in the proposed control system are automatically adjusted by back-propagation algorithm of the neural network. And applying to the position control system, it's performance is verified through the results of computer experiment.
-
PID control has been well used for several decade. For PID algorithm, some tuning methods are used and with these parameters, control system is designed. But in some cases various kinds of performance are needed, so variable type of performance index must be utilized so that the designed control system meets the conditions. This paper presents some linear combinational type of performance index and with numerical methods, the PID parameters are obtained. Moreover I-PD type controller is used so that this two degree of freedom controller may give more desirable output characteristics. Simulations are done with MATLAB m file and mdl files.
-
In this paper, a DLC method is suggested for linear feedback systems to improve the tracking performance when the task of the system is repetitive. DLC can generate the desired control input directly from the previously teamed control inputs corresponding to other output trajectories. It is assumed that all outputs considered in this paper have some relations called "proportionality. " To show the validity and tracking performance of the proposed method, some simulation are performed for the tracking control of a linear system with a PI controller.
-
The robust output tracking control problem of general nonlinear MIMO systems is discussed. The robustness against parameter uncertainties is considered. In this paper, we proposed the robust output tracking control scheme for a class of MIMO nonlinear dynamical systems using output feedback linearization method. The presented control scheme is based on the VSS. We assume that the nonlinear dynamical system is minimum phase, the relative degree of the system is r
$_{1}$ +r$_{2}$ +…r$_{m}$ $\leq$ n and zero dynamics is stable. It is shown that the outputs of the closed-loop system asymptotically track given output trajectories despite the uncertainties while maintaining the boundedness of all signals inside the loop. And we verified that the proposed control scheme is then applied to the control of a two degree of freedom (DOF) robotic manipulator with payload.d. -
When a flexible arm is rotated by a motor about an axis through the arm's fixed end, transverse vibration may occur. The motor torque should be controlled in such a way that the motor rotates by a specified angle, while simultaneously stabilizing vibration of the flexible arm so that it is arrested at the end of rotation. In this paper, we propose nonlinear observer for one-link flexible am. Then based on the error dynamic equation between the plant dynamic equation and the nonlinear observer dynamic equation of the flexible one-link am, Lyapunov candidate function is applied to achieve a stable deterministic nonlinear feedback controller for the regulation of joint angle.
-
Pole placement method is widely used in controller design. For the stability of the closed loop system, user-specified desired locations including extra pole locations in the s-plane is chosen and by some procedure, feedback gain is obtained. In this paper, only desired pole location is used, and the calculation process is done for attaining linear quadratic stability. Similarly transformation is used for this. By computer simulations using MATLAB, the effectiveness is shown.
-
시공간 빔포밍 기술은 기존의 배열 안테나가 공간만의 처리를 해온 것에 대하여 이를 시간 영역으로까지 확장하여 특정한 방향에서 특정한 시간에 도착하는 다중경로는 증폭하고 다른 다중경로는 제거하는 것을 의미한다. 본 논문은 배열 안테나를 가진 DS-CDMA에서 시스템 파라미터 부정합이 존재할 때, 시공간 빔 형성기의 성능에 대하여 연구하였다. 시뮬레이션 결과, 부정합이 존재할 때 전통적인 빔포머가 상대적으로 강인함을 보였지만 원근 문제는 해결할 수 없었으며, 실제의 추정 결과를 적용했을 때는 MUSIC 시공간 빔포머가 가장 우수한 성능을 보였다.
-
본 논문에서는 IEEE 802.11a 무선 LAN 용 CODEC 회로를 설계하고, VHDL 코딩과 FPGA에 의한 회로설계 검증에 관해 기술한다. IEEE 802.lla WLAN CODEC의 구조는 크게 데이터 보호를 위한 스크램블러/디스크램블러, 채널 에러에 대한 정보보호를 위한 Convolutional 부호기와 Viterbi 복호기로 구성된 채널 코덱, 그리고 연집에러를 랜덤 에러로 변화시키는 인터리버/디인터리버로 구성된다. 본 논문에서는, 이와 같은 CODEC의 각 부분을 하드웨어로 구현하기 위한 새로운 회로구성을 제안하고, 그 성능을 VHDL 코딩에 의한 시뮬레이션과 FPGA에 의한 하드웨어 검증 결과를 제시한다.
-
본 논문은 GPS 기술을 이용하여 지상 이동체의 위치 정보를 취득하고, 취득된 위치 정보를 이용하여 지상 이동체에 공공 정보와 상업 정보를 멀티미디어 데이터로 편집하여 실시간으로 제공하는 시스템을 제안하고 설계하였다. 설계한 시스템의 효용성과 신뢰성을 검증하기 위하여 PC와 Visual BASIC, 포토샵을 이용하여 시뮬레이션하였고, CYSTEL INC의 위성 수신기 모듈과 산업보드를 이용하여 제작하였다.
-
본 논문에서는 현재 산업현장에서 사용되고 있는 유선 콘트롤러와 무선 콘트롤러의 문제점을 보완하기 위해 컨볼루션 부호와 CRC부호를 적용한 무선 콘트롤러를 구현하였다. 콘트롤러의 제어를 위해 마이크로프로세서를 이용하였으며, 송수신 프로그램에 컨볼루션 부호를 적용하였을 때와 적용하지 않았을 때의 각각의 경우에 데이터 수신율을 테스트하여 비교해 보았다. 무선 콘트롤러의 신뢰도 향상을 위해 적용한 컨볼루션 부호는 구속장 k=3, 부호율 1/2인 부호를 사용하였고, CRC 부호는 POLYNOMIAL함수를 /Χ
$^{15}$ +Χ$^{2}$ +1로 사용하여 총 CRC비트는 16비트(2바이트)가 되게 하였다. -
본 논문에서는 여러 개의 기저함수를 갖는 멀티웨이브렛 필터 뱅크의 구조를 분석한다. 멀티웨이브렛 기저함수로 이루어진 필터뱅크는 메트릭스 형태의 값을 갖는다. 멀티웨이브렛은 직교성, 대칭성, 그리고 짧은 구간응답을 동시적으로 제공 할 수 있어 기존의 단일 웨이브렛 보다 신호의 분석 및 압축 처리 측면에서 우수한 성능을 얻을 수 있다. 또한 멀티웨이브렛은 스칼라 웨이브렛과 다르게 필터뱅크의 입력 열을 두개 또는 그 이상을 가질 수 있다. 본 논문은 이러한 멀티웨이브렛 필터뱅크의 입력 열을 얻는 방법과 실제적인 데이터가 어떻게 적용되는지를 보인다.
-
UWB 통신 기술은 초광대역 특성 때문에 높은 전송 속도와 저전력 통신이 가능하여 의료장비에 응용이 가능하며, 특히 유선이라는 제약성으로 큰 불편을 겪고 있는 ECG시스템에 적용되어질 수 있다. 따라서 근거리 무선 통신 기술로 급부상하고 있는 UWB 통신 기술의 응용을 위해 UWB 신호 특성 및 변조 방식의 연구가 행하여져야 한다. 이에 본 논문에서는 UWB에 사용가능한 각종 펄스의 특성과 적용하고자 하는 시스템 환경에서 발생할 수 있는 UWB 신호의 간섭 영향을 분석하였으며, 간단한 UWB 송수신 시스템을 시뮬레이션 하였다.
-
In this paper, the Viterbi decoder containing new branch metrics of the squared Euclidean distance with multiple order phase differences is introduced in order to improve the bit error rate (BER) in the differential detection of the trellis-coded MDPSK-OFDM. The proposed Viterbi decoder is conceptually same as the multiple Phase differential detection method that uses the branch metric with multiple phase differences. Also, we describe the Viterbi algorithm in order to use this branch metrics. Our study shows that such a Viterbi decoder improves BER performance without sacrificing bandwidth and power efficiency. Also, the proposed algorithm can be used in the single carrier modulation.
-
다중 사용자 검출은 CDMA 시스템에서 가장 큰 문제인 원관 문제를 해결해 주는 하나의 방법이다. 동기식 다중 사용자 검출기는 크게 선형과 비선형으로 나누어지며, 선형 검출기에는 역상관기, MMSE 검출기, LMS 검출기, RLS 검출기가 있다. 비선형 검출기에는 SIC, PIC, DFD등이 있으며, 본 논문에서는 동기식 선형 및 비선형 다중 사용자 검출기와 비동기식 다중 사용자 검출기의 특성과 성능을 비교 평가하고, 학습 계열이 필요 없는 블라인드 다중 사용자 검출기를 위의 검출기 성능과 비교 평가함으로서 학습 계열을 이용할 수 없는 상황에서 같은 성능으로 블라인드 다중 사용자 검출기를 사용 할 수 있음을 확인하였다.
-
본 논문은 Uncooled DFB-LD를 광원으로 사용하는 일반적인 8채널 구조의 CWDM시스템에 대해 메트로 파장대를 사용하여 최대 15채널까지 증설이 가능한 시스템 구조에 대한 제안 및 특성을 시뮬레이션 하였다.
-
ATM 트래픽 관리의 목적은 호 설정시 요구하는 QoS를 충족시키는 것과 최소한의 망 자원을 이용하면서 망을 보호하는 것이다. 또한, 서로 다른 채널간 QoS을 공정하게 보장하는 것이 필요하다. 본 논문에서는 채널들간에 공정한 QoS 제공과 링크 이용률을 높이기 위하여 입력버퍼에 문턱값을 기반으로 출력 셀율을 동적으로 조정하는 새로운 TBBM(threshold based buffer management)알고리즘을 제안하였으며 문턱값 변화에 따른 성능을 분석하였다.
-
본 논문은 이동 통신 및 IEEE 802.lla WLAN에서 사용하고 있는 컨벌루셔널 부호의 복호기인 비터비 복호기의 SMU(Survivor Metric Unit)의 최적 메모리 제어에 관한 연구이다. 비터비 복호기기 구조는 크게 BMU, ACSU, SMU부로 구성된다. 이때 SMU부는 최적의 경로를 역추적 하여 최종 복호 데이터를 출력해 주는 블록으로, 역추적 길이에 따라 메모리 사용 양과 복호 성능이 좌우된다. 따라서 본 논문에서는 최적 메모리 제어 알고리즘을 제안함으로써 복호 속도의 향상과 메모리 사용 양을 줄이는 방법을 제안한다. 제안 알고리즘의 성능을 검증하기 위해 기존의 비터비 복호기와 역추적 길이에 따른 비터비 복호기의 성능을 실험을 통해 분석함으로써 제안 방법의 객관적인 성능을 분석한다.
-
This paper presents a nonlinear least squares decision feedback equalizer Bilinear systems are attractive because of the ability to approximate a large class of nonlinear systems efficiently. The nonlinearity of channel is modeled using a bilinear system. The algorithms are derived by using the QR decomposition for minimization covariance matrix of prediction error by applying Givens rotation to the bilinear model. Result of computer simulation experiments that compare the performance of the bilinear DFE to two other DFE's in eliminating the intersymbol interference caused by a nonlinear channel are presented In the paper.
-
본 논문에서는 친사용자 환경의 시뮬레이션 환경을 제공하는 SPW 시뮬레이션 플랫포음을 이용하여 스마트 안테나 CDMA 이동통신 시스템을 구현하여 빔형성에 있어서 고정(non-adaptive)의 경우와 적응(adaptive)의 경우로 나누어 성능 분석을 수행하였다. 특히 적응인 경우는 LS(Least Square) 와 LMS (Least Mean Square) 의 적응 알고리즘을 비교하였으며 간섭 기지국의 각도 (Interferer signal angle) 변화에 따른 성능도 비교하였다. SPW 시뮬레이션 결과, 고정 경우보다는 적응 경우가 3[㏈]이상의 이득을 얻을 수 있었으며 LMS 보다는 LS 의 성능이 우수함을 알 수 있었다.
-
디지털 2차 적응 IIR 대역 통과 필터의 진폭 특성을 해석, 적응 계수와 입력 신호의 중심 주파수 그리고 극의 각과의 관계를 해석하고, 적응 계수의 경계를, 기존에 발표된 세 알고리즘을 예로 들어, 평가하였다.
-
In this paper, we have a fluxgate sensor with ferrite core. Thought sensor is consist of one excitation coil and two pick-up coil, and A lock-in amplifier circuity is designed for Signal processing of picking up 2nd harmonics from pick-up coils. Excitation coils is turned by 20 turns, and pick-up coil for picking up harmonics is turned by 40 turns eachother. It convert 2nd harmonics to DC output voltage. Measured output voltage and sensitivity, direction of sensor about out side magnetic field, and also sensor output properties about excitation frequency and current.
-
A memory industry is developing rapidly according to the period of the ubiquitous to approach. According to the development of a memory industry, the efficiency of the manufacture is becoming the serious consideration. DC parameter test system was a development low in this research for an efficiency increase of the manufacture. DC parameter test system increase of the manufacture. In the method to measure the output after permit volt and current at element.
-
At process of production according to development of accumulation degree of semi-conductor element, because functional mistake examination time required increases, is becoming big obstacle factor in cost-cutting. Studied pattern generator that generate pattern and address that is bundle enemy to process these controversial point effectively.
-
There are several methods for the design of 2D filter. Notable among them is McClellan transform method. This transform allows us to obtain a high order 2D FIR filter through mapping the 1D frequency points of a 1D prototype FIR filter onto 2D frequency contours. We design 2D filter using this transform. Then we notice for mapping deviation of the 2D filter. In this paper, Quadratic programming (QP) method allows us to obtain coefficients of McClellan transform. Then we compare deviation of QP method with least-squares(LS) method. Elliptic filter is used for comparison. The optimal cutoff frequencies of a 1D filter are obtained directly from the QP method. Also several problem of LS method are solved.
-
웹은 이제 우리 생활의 일부분이 되어 가고 있다. 많은 사람들이 웹을 이용하여 중요한 정보를 얻고 있으며, 이로 인하여 많은 콘텐츠들이 개발되고 있다. 그 중 학습을 목적으로 하는 교육 콘텐츠도 개발되고 있는데, 이러한 개발은 교육 및 훈련이 쉽고, 원하는 시간에 반복 학습이 가능하기 때문에 많이 이루어지고 있다. 본 연구에서는 80C196KC를 학습하고자 하는 학생들의 이해를 돕기 위해 Flash와 Java를 이용해 교육 컨텐츠를 제작하였다.
-
본 논문에서는 블루투스 장비 간 암호화를 위해 사용되는 암호화 모듈의 설계 및 구현에 관한 내용을 다룬다. 암호화 모듈은 기저 대역내에 암호화 키 생성 모듈과 암호화 엔진 모듈로 구성된다. 암호화 키 생성 모듈은 Cylink사에서 제안한 공개 도메인인 SAFER+(Secure And Fast Encryption Routine) 알고리즘을 사용하여 128bit 키를 생성한다. 그 구성은 키 치환을 위한 치환 함수(key-controlled substitution)와 선형 변환을 위한 PHT(Pseudo-Hadamard Transform)와 Armenian Shuffle 변환기로 구성된다. 암호화 엔진 모듈은 전송 패킷내의 페이로드 데이터와 생성된 사이퍼 키 스트림 데이터와 XOR연산을 통하려 암호화를 행하며 그 구성은 LFSR (Linear Feedback Shift Register)와 합 결합기로 구성된다. 이 중 암호화 키 생성 모듈은 LM(Link Manager)의 PDU(Protocol Data Unit) 패킷을 통해 상호 정보가 교환되므로 암호화키를 생성하는데 있어 시간적 제약이 덜 하다. 따라서 본 논문에서는 변형된 SAFER+ 알고리즘 구현하는데 있어 치환 함수의 덧셈과 XOR, 로그, 지수연산을 바이트 단위의 순차 계산을 수행함으로써 소요되는 하드웨어 용량을 줄이도록 설계하였다. 본 논문에서 제시한 모듈은 블루투스 표준안 버전 1.1에 근거하여 구현하였으며 시뮬레이션 및 테스트는 Xilinx FPGA를 이용하여 검증하였다.
-
어레이 셀 내의 연산에 대한 고성능 처리는 시스톨릭 어레이의 중요한 특징이다. 본 논문에서는 시스톨릭 어레이 구조 내 셀이 또 다른 시스톨릭 어레이 구조를 가지는 슈퍼 시스톨릭 어레이 구조를 제안하고, 그 예로 비트 레블 슈퍼 시스톨릭 정렬기의 설계 및 구현에 대하여 기술한다. 먼저 정규순환방정식으로 표현된 정렬 알고리즘으로부터 워드 레블 1차원 평면 시스톨릭 어레이를 유도한 후 유도된 워드 레블 시스톨릭 어레이를 슈퍼 시스톨릭 어레이로 변환한다. 위의 과정으로 유도된 비트 레블 슈퍼 시스톨릭 정렬기를 RT수준에서 VHDL로 모델링 하여 동작을 검증하였으며, 검증된 비트 레블 슈퍼 시스톨릭 정렬기는 Hynix에서 제공되는 0.35
$\mu\textrm{m}$ 셀 라이브러리와 FPGA V200E칩을 사용하여 합성 및 구현되었다. -
A wavelet transform which is presented as a new technique of signal processing field decompose input signals into subsignals for expressing them in different resolutions and into detail signals for expressing the remaining signals. And the signals obtained from the progress include the information about input signals at the same time and scale. And when two wavelet bases are designed to form Hilbert transform pair, wavelet Pair show superior performance than the existing DWT in data detection of pulse type. Therefore in this paper, we detected position of impulse noise by using two dyadic wavelet bases which are designed by truncated coefficient vector.
-
본 논문에서는 모듈성과 확장성을 갖는 시스톨릭 어레이를 이용한 두 띠 행렬의 비트 연속 승산기 구현에 대하여 기술한다. 띠 폭이 3인 4
$\times$ 4 띠 행렬이 주어질 때 워드 레블 승산기 설계를 위한 3차원 DG로부터 2차원 시스톨릭 어레이를 유도한 후, 워드 레블 PE를 비트 연속 승산기와 가산기를 이용하여 비트 레블 PE로 변환시켜 띠 행렬의 비트 레블 승산기를 설계한다. 구현된 워드 레블 승산기와 비트 레블 승산기는 RT 수준에서 VHDL로 모델링하여 동작을 검증하였다. 검증된 시스톨릭 어레이를 이용한 워드 레블 승산기와 비트 레블 승산기는 Hynix에서 제공하는 0.35$\mu\textrm{m}$ 셀 라이브러리를 사용하여 Synopsys design compiler로 합성되었다. -
블루투스 전송 기술은 2.4㎓ 의 ISM(Industrial Scientific Medicine)밴드에서 주파수 호핑 방식을 사용한다. 주파수 호핑율은 연결 상태에서 초당 1600회, 조회 또는 호출 상태에서 초당 3200회의 호핑을 한다. Hop 채널 선택은 블루투스 표준안에서 제시한 5개의 호핑 시퀸스 중 하나를 선택하고 호핑 주파수에 따라 이를 매핑 함으로써 이루어진다. 본 논문에서는 6개의 상태에 따라 다르게 실행되는 채널 계산을 효율적으로 제어하고 필요한 연산모듈의 수를 줄이기 위해 9비트 프로세서를 이용해 Hop 선택 모듈을 설계하고 구현한다. 설계된 모듈은 레지스터 파일, 마이크로프로그램 제어장치, 가산, 치환(permutation), Modulo 계산을 위한 3개의 연산장치로 구성된다. Hop 채널 계산 중 가장 클럭 소요가 큰 Modulo 연산은 SRT나눗셈 알고리즘을 사용하여 음수 값 계산 및 연산 속도 향상을 꾀하였다. 제시된 Hop 선택 모듈은 하드웨어 묘사언어인 VHDL로 설계하고 시뮬레이션 및 테스트는 Xilinx FPGA를 이용해 검증하였다.
-
This paper shows a novel and simple IIR/FIR QMF(quadrature mirror filter) filter banks, mixed IIR and FIR structure. Here, FIR filters used for phase compensation. In this paper, we introduced analysis and synthesis filter banks, which used FIR linear phase filters and all pass filters. In result, phase response of analysis and synthesis filter banks become approximately linear characteristic. Simultaneously, a liasing distortion can be completely canceled.
-
본 논문에서는 VHDL 언어를 이용하여 대역확산 시스템의 기저대역부를 FPGA를 이용하여 설계하였다. 신호 전송시 필요로 하는 대역폭보다 훨씬 넓은 대역폭으로 확산하여 전송함으로써 간섭에 영향이 적고, 비화성이 우수한 대역확산 방식을 기반으로 하여, 길쌈부호기와 PN코드를 이용해 전송대역을 확산하였고, 에러정정을 위한 비터비 디코더를 설계하였다. VHDL 설계는 Xilinx사의 FPGA 디자인 툴인 Xilinx Foundations.1을 사용하였으며, FPGA configuration을 위한 타이밍 시뮬레이션을 수행하였다.